Response of soil aggregate disintegration to the different content of organic carbon and its fractions during splash erosion     

Hairu Li  Gang Liu  Ju Gu  Hong Chen  Hongqiang Shi  Mohamed A. M. Abd Elbasit  Feinan Hu 《水文研究》2021,35(2):e14060

Aggregate disintegration is a critical process in soil splash erosion. However, the effect of soil organic carbon (SOC) and its fractions on soil aggregates disintegration is still not clear. In this study, five soils with similar clay contents and different contents of SOC have been used. The effects of slaking and mechanical striking on splash erosion were distinguished by using deionized water and 95% ethanol as raindrops. The simulated rainfall experiments were carried out in four heights (0.5, 1.0, 1.5 and 2.0 m). The result indicated that the soil aggregate stability increased with the increases of SOC and light fraction organic carbon (LFOC). The relative slaking and the mechanical striking index increased with the decreases of SOC and LFOC. The reduction of macroaggregates in eroded soil gradually decreased with the increase of SOC and LFOC, especially in alcohol test. The amount of macroaggregates (>0.25 mm) in deionized water tests were significantly less than that in alcohol tests under the same rainfall heights. The contribution of slaking to splash erosion increased with the decrease of heavy fractions organic carbon. The contribution of mechanical striking was dominant when the rainfall kinetic energy increased to a range of threshold between 9 J m⁻² mm⁻¹ and 12 m⁻² mm⁻¹. This study could provide the scientific basis for deeply understanding the mechanism of soil aggregates disintegration and splash erosion.  相似文献   

琼胶/SiO₂复合纤维的制备及性能研究     

吴大伟  颜廷波  李腾飞  王应霞  肖玉斌  薛志欣  夏延致 《海洋科学》2020,44(10):39-45

利用湿法纺丝技术制备了琼胶/SiO₂复合纤维，对琼胶分子在溶液中的分散性、纺丝液流变性、纤维的形貌、化学结构分别用DLS、旋转黏度计、SEM、FTIR和XRD进行了表征，并对纤维的力学性能、热性能和吸湿性能进行了测定。研究结果表明：琼胶分子在溶液中呈纳米尺度分布，纺丝液具有良好的流动性；琼胶/纳米SiO₂复合纤维具有良好的形态。随着纳米SiO₂的添加量逐渐提高，复合纤维的力学拉伸强度先增强后降低，复合纤维的吸水性降低，复合纤维的热稳定性逐渐增强。结合复合纤维综合性能，纳米SiO₂的最佳添加质量分数为0.5%。  相似文献   

ISA model: A constitutive model for soils with yield surface in the intergranular strain space          下载免费PDF全文

W. Fuentes  Th. Triantafyllidis 《国际地质力学数值与分析法杂志》2015,39(11):1235-1254

In this article, a new constitutive model for soils is proposed. It is formulated by means of plasticity, but in contrast to the precedent works, it presents a yield function describing a surface within the intergranular strain space. This latter is a state variable providing information of the recent strain history. An expression for the plastic strain rate has been proposed to guarantee the stress rate continuity. Under the application of medium or large strain amplitudes, the constitutive equation becomes independent of the intergranular strain and delivers a mathematical structure similar to some Karlsruhe hypoplastic models. Some simulations of monotonic and cyclic triaxial test are provided to evaluate and analyze the model performance. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Weakness and mechanical anisotropy of phyllosilicate-rich cataclasites developed after mylonites of a low-angle normal fault (Simplon Line,Western Alps)     

《Journal of Structural Geology》2016

The Simplon Fault Zone is a late-collisional low-angle normal fault (LANF) of the Western Alps. The hanging wall shows evidence of brittle deformation only, while the footwall is characterized by a c. 1 km-thick shear zone (the Simplon Fault Zone), which continuously evolved, during exhumation and cooling, from amphibolite facies conditions to brittle-cataclastic deformations. Due to progressive localization of the active section of the shear zone, the thermal-rheological evolution of the footwall resulted in a layered structure, with higher temperature mylonites preserved at the periphery of the shear zone, and cataclasites occurring at the core (indicated as the Simplon Line). In order to investigate the weakness of the Simplon Line, we studied the evolution of brittle/cataclastic fault rocks, from nucleation to the most mature ones. Cataclasites are superposed on greenschist facies mylonites, and their nucleation can be studied at the periphery of the brittle fault zone. This is characterized by fractures, micro-faults and foliated ultracataclasite seams that develop along the mylonitic SCC′ fabric, exploiting the weak phases mainly represented by muscovite and chlorite. Approaching the fault core, both the thickness and frequency of cataclasite horizons increase, and, as their thickness increases, they become less and less foliated. The fault core itself is represented by a thicker non-foliated cataclasite horizon. No Andersonian faults or fractures can be found in the footwall damage zone and core zone, whilst they are present in the hanging wall and in the footwall further from the fault. Applying a stress model based on slip tendency, we have been able to calculate that the friction coefficient of the Simplon Line cataclasites was <0.25, hence this fault zone is absolutely weak. In contrast with other fault zones, the weakening effect of fluids was of secondary importance, since they accessed the fault zone only after an interconnected fracture network developed exploiting the cataclasite network.  相似文献   

DEM simulations of methane hydrate exploitation by thermal recovery and depressurization methods     

《Computers and Geotechnics》2016

Methane hydrate (MH, also called fiery ice) exists in forms of pore filling, cementing and load-bearing skeleton in the methane hydrate bearing sediment (MHBS) and affects its mechanical behavior greatly. To study the changes of macro-scale and micro-scale mechanical behaviors of MHBS during exploitation by thermal recovery and depressurization methods, a novel 2D thermo-hydro-mechanical bonded contact model was proposed and implemented into a platform of distinct element method (DEM), PFC2D. MHBS samples were first biaxially compressed to different deviator stress levels to model different in-situ stress conditions. With the deviator stress maintained at constant, the temperature was then raised to simulate the thermal recovery process or the pore water pressure (i.e. confining pressure for MH bond) was decreased to simulate the depressurization process. DEM simulation results showed that: during exploitation, the axial strain increased with the increase of temperature (in the thermal recovery method) or decrease of pore water pressure (in the depressurization method); sample collapsed during MH dissociation if the deviator stress applied was larger than the compression strength of a pure host sand sample; sample experienced volume contraction but its void ratio was slightly larger than the pure host sand sample at the same axial strain throughout the test. By comparison with the laboratory test results, the new model was validated to be capable of reproducing the exploitation process by thermal recovery and depressurization methods. In addition, some micro-scale parameters, such as contact distribution, bond distribution, and averaged pure rotation rate, were also analyzed to investigate their relationships with the macroscopic responses.  相似文献   

Numerical implementation of the installation/mooring line and application to analyzing comprehensive anchor behaviors     

《Applied Ocean Research》2016

With the application of innovative anchor concepts and advanced technologies in deepwater moorings, anchor behaviors in the seabed are becoming more complicated and pose a great challenge to the analytical methods. In the present work, a large deformation finite element (FE) analysis employing the coupled Eulerian–Lagrangian technique is performed to simulate the installation/mooring line, and then is applied to analyzing comprehensive anchor behaviors in the seabed. By connecting cylindrical units with each other using connector elements, the installation/mooring line is constructed. With the constructed installation/mooring line, FE simulations are carried out to investigate comprehensive anchor behaviors in the seabed, including long-distance penetration of drag anchors, keying of suction embedded plate anchors and non-catastrophic behavior of gravity-installed anchors. Through comparative studies, the accuracy of the proposed method is well examined. A parametric study is also undertaken to quantify the effects of the frictional coefficient, initial embedment depth, and soil weight on the profile of the embedded anchor line and the shackle load. The present work demonstrates that the proposed FE model, which incorporates the installation/mooring line and the anchor, is effective in analyzing the comprehensive anchor behaviors in the seabed.  相似文献   

Linking foraging behavior and diet in a diving seabird          下载免费PDF全文

Sabrina Harris  Flavio Quintana  Javier Ciancio  Luciana Riccialdelli  Andrea Raya Rey 《Marine Ecology》2016,37(2):419-432

Foraging behavior and diet of breeding seabirds may be analysed simultaneously with the combined use of remote sensing devices and stable isotope analysis. Imperial shag, Phalacrocorax atriceps, breeding at Punta León colony, Argentina, were equipped with global positioning system (GPS) loggers to record foraging trips and blood samples were taken after removal of the devices in order to analyse their nitrogen and carbon stable isotope composition in whole blood and plasma. Whole blood was correlated to plasma isotopic composition for each individual (n = 35), linking diet in the short and medium term. Sexes did not differ in isotopic signatures. The maximum distance reached and the total number of dives that individuals made on two consecutive foraging trips were correlated to their plasma nitrogen isotopic signature. Individuals that went further from the colony and dived fewer times presented more positive signatures, indicative of benthic prey consumption (e.g. Raneya brasiliensis). Diet was predominantly benthic with some individuals incorporating pelagic prey (Engraulis anchoita) and even cephalopods (Octopus tehuelchus). Within breeding pairs (n = 9), different combinations of foraging and prey preferences were observed. Estimated trophic levels of these individuals were similar to those of the same species in other colonies further south along the Patagonian coast.  相似文献   

Study of Influence of Regional Geodynamic Background on Strata Behaviors in China's Tongxin Mine          下载免费PDF全文

Ying Chen  Hongwei Zhang  Bin Yu  Zhijie Zhu  Wenda Wu  Yunpeng Li 《Resource Geology》2016,66(1):1-11

Strata behaviors are mainly affected by regional geodynamic background. The influence of rock mass stress and energy distribution on strata behaviors in the Tongxin mine is studied in terms of regional tectonic movement, seismic activity and tectonic stress field. The results show that the extrusion lifting movement of Kouquan fault adjacent to the Tongxin mine results in the stress concentration in the rock of the Carboniferous coal bed and accumulation of a large amount of elastic energy and forms structural background of Tongxin mine. Due to various seismic activities in the mine area, the strain energy is known to reach much higher levels, up to 0.5×10⁸ J^1/2. Since the stratigraphic structure is sensitive to the mining operation, the strain energy could cause strong strata behaviors. A special geological structure model of the Tongxin mine is established based on the geodynamic division method. The distribution of regional structure stress field is determined by the rock mass stress analysis system. Based on this model, Tongxin mine is divided into five areas with high stress, eight areas with low stress and eight areas with gradient stress. The strong strata behaviors mostly occur in high stress areas. These results could provide guidance to predict the strength of regional or mine pressure and control strata behavior in different areas.  相似文献   

深部地质钻探钻柱失效行为分析          下载免费PDF全文

王志刚  梁健  刘秀美 《探矿工程》2018,45(12):28-31,46

国家的“三深一土”规划确定全面开展深地探测,而在深地探测中钻柱是最重要的连接纽带,其长期在充满钻井液的井眼内工作,受力十分复杂,且受腐蚀、磨损、温度等影响,极易发生钻柱失效事故,造成重大经济损失。研究发现,振动是引起钻柱失效的主要原因,但是深部地质钻探中除了振动引起钻柱失效外,还包括钻柱质量因素、人为因素、钻井质量、套管下入因素、测斜因素以及钻井液因素引起的钻柱失效,本文针对这些影响因素提出了对应的预防措施。同时随着地质钻探井深的不断加深,地质钻探钻柱动力学研究会变得越来越重要,这就需要地质钻探人员在充分考虑地质钻探钻柱失效影响因素的前提下,加大对地质钻探钻柱动力学的研究,以更好地保证深部地质钻探的顺利进行。  相似文献   

斑岩型钼矿床研究进展与问题   总被引：1，自引：0，他引：1  

曹冲  申萍 《地质论评》2018,64(2):477-497

本文在简要介绍全球重要成矿带斑岩型钼矿床品位、储量、时空分布以及构造背景的基础上,着重归纳了斑岩型钼矿床中Mo在岩浆—热液演化过程中的地球化学行为特征以及Mo在成矿流体中的迁移与沉淀机制两个方面的研究进展。取得了以下认识:形成斑岩型钼矿床成矿岩浆氧逸度(f_(O2))变化范围较大,但一般大于铁橄榄石—磁铁矿—石英(FMQ)缓冲体系。斑岩钼矿床形成的主要受岩浆房的大小,大体积的岩浆流体能否高效聚集到浅部岩株或岩脉,岩浆中的挥发分(例如F)含量等因素的控制,但与成矿花岗岩和出溶流体中Mo的含量高低无直接关系。成矿流体的氧逸度与p H降低对辉钼矿沉淀具有关键作用。除此之外,温度与盐度降低对辉钼矿沉淀也有重要作用。流体的多阶段沸腾可能对提高Mo品位具有重要意义。此外,应加强岩浆结晶分异过程、岩浆热液转化过程Mo的地球化学行为研究。  相似文献