东濮凹陷膏盐岩对烃源岩成烃演化的控制作用及其石油地质意义     

陈湘飞  李素梅  张洪安  徐田武  张云献  万中华  纪红  郭振乾 《现代地质》2018,32(6):1125

东濮凹陷北部盐湖相膏盐岩极其发育,膏盐岩对烃源岩性质及生烃特征的影响研究薄弱。采用地质与地球化学相结合途径,探讨了含膏盐岩层系烃源岩特性及其成烃演化规律。结果表明,盐区与无盐区烃源岩的特性有很大差异,北部盐湖相含盐区深灰色、褐色等暗色页岩有机质丰度一般大于15%,有机质类型以Ⅱ1型和Ⅰ型为主,是区内主要的优质烃源岩;南部淡水湖相无盐区主要发育有利生气的Ⅱ—Ⅲ型干酪根,反映东濮凹陷烃源岩的质量及生烃潜能与膏盐岩的发育密切相关。观察到膏盐岩影响烃源岩的成烃演化进程,当膏盐层厚度为50 m时,生油窗的范围显著增加;随着盐岩厚度(>50 m)的增加,湿气窗的范围也逐渐增加;当膏盐岩厚度约400 m时,生油窗范围开始减小,湿气窗的范围仍有增加趋势。膏盐岩对烃源岩“生油气窗”的影响是基于其较高的热导率属性,通过影响地温场而实现。以地质解剖为依据,建立了文留地区含膏盐岩层系烃源岩成烃演化模式。东濮凹陷含膏盐岩层系烃源岩的演化特征对该凹陷及同类含膏盐岩盆地油气勘探具有重要指示意义。  相似文献   

Tectono–Thermal Evolution, Hydrocarbon Filling and Accumulation Phases of the Hari Sag, in the Yingen–Ejinaqi Basin, Inner Mongolia, Northern China     

YANG Peng  REN Zhanli  XIA Bin  TIAN Tao  ZHANG Yong  QI Kai  REN Wenbo 《《地质学报》英文版》2018,92(3):1157-1169

This work restored the erosion thickness of the top surface of each Cretaceous formations penetrated by the typical well in the Hari sag, and simulated the subsidence burial history of this well with software BasinMod. It is firstly pointed out that the tectonic subsidence evolution of the Hari sag since the Cretaceous can be divided into four phases: initial subsidence phase, rapid subsidence phase,uplift and erosion phase, and stable slow subsidence phase. A detailed reconstruction of the tectonothermal evolution and hydrocarbon generation histories of typical well was undertaken using the EASY R_0% model, which is constrained by vitrinite reflectance(R_0) and homogenization temperatures of fluid inclusions. In the rapid subsidence phase, the peak period of hydrocarbon generation was reached at c.a.105.59 Ma with the increasing thermal evolution degree. A concomitant rapid increase in paleotemperatures occurred and reached a maximum geothermal gradient of about 43-45℃/km. The main hydrocarbon generation period ensued around 105.59-80.00 Ma and the greatest buried depth of the Hari sag was reached at c.a. 80.00 Ma, when the maximum paleo-temperature was over 180℃.Subsequently, the sag entered an uplift and erosion phase followed by a stable slow subsidence phase during which the temperature gradient, thermal evolution, and hydrocarbon generation decreased gradually. The hydrocarbon accumulation period was discussed based on homogenization temperatures of inclusions and it is believed that two periods of rapid hydrocarbon accumulation events occurred during the Cretaceous rapid subsidence phase. The first accumulation period observed in the Bayingebi Formation(K_1 b) occurred primarily around 105.59-103.50 Ma with temperatures of 125-150℃. The second accumulation period observed in the Suhongtu Formation(K_1 s) occurred primarily around84.00-80.00 Ma with temperatures of 120-130℃. The second is the major accumulation period, and the accumulation mainly occurred in the Late Cretaceous. The hydrocarbon accumulation process was comprehensively controlled by tectono-thermal evolution and hydrocarbon generation history. During the rapid subsidence phase, the paleo temperature and geothermal gradient increased rapidly and resulted in increasing thermal evolution extending into the peak period of hydrocarbon generation,which is the key reason for hydrocarbon filling and accumulation.  相似文献   

高陡岩石边坡软体护坡技术设计及施工实践          下载免费PDF全文

孙小杰  张辉  杜炤伟 《探矿工程》2018,45(4):78-81

为了消除济南市燕翅山北侧采矿遗留的高陡岩石边坡的地质灾害隐患,恢复自然植被,通过施工砼基座、施工砼格构梁、砌筑软体生态袋和挂网喷播等多种技术方法进行了综合治理,消除了滑坡和崩塌等地质灾害隐患,整个坡面植被覆盖率超过99%,消除了视觉污染,恢复了当地生态环境,该工程成功的设计及施工实践对类似高陡岩石边坡有很好的指导和借鉴作用。  相似文献   

Occurrence and Chemical Compositions of Amphiboles in Altered Dioritic Rocks of Laiwu Skarn‐Type Iron Deposit in West Shandong Area,China     

《Resource Geology》2018,68(4):425-445

The Laiwu Fe deposit is the largest skarn‐type deposit in West Shandong in China, with an estimated reserve of 290 Mt of iron ore. Here, we investigate the occurrence and chemical composition of amphiboles in altered dioritic rocks of this deposit. Three generations of amphibole group minerals were identified in these rocks. The first type (Type 1) is a hornblende with a generally euhedral crystal shape, 150–500 μm in size, and dominantly occurs in the host monzonite. The second type (Type 2) of hornblende occurs as fine grains (<100 μm) or concentric rims, less than 50 μm in thickness, around the Type 1 hornblende. The third type (Type 3) of amphibole is anhedral actinolite occurring along the boundary or the cracks of the Type 1 or 2 hornblende grains. The Type 1 hornblende has higher FeO (12.5–15.6 wt.%) and lower MgO contents (11.2–14.6 wt.%) than the Type 2 hornblende, which has an FeO content ranging from 8.8 to 10.5 wt.% and MgO content ranging from 14.2 to 17.1 wt.%. The Type 3 actinolite shows the lowest FeO (4.6–6.4 wt.%) and highest MgO (19.8–21.2 wt.%) contents. We infer that the Type 2 hornblende formed from Fe‐rich hydrothermal fluids released during rapid upwelling of the crystallizing magma. The fluids were relatively reduced and enriched in Fe. The Type 3 actinolite formed by coupled dissolution and reprecipitation, and its formation is one of the features denoting Fe‐enrichment events. Our study of these types of amphibole provides insights into the ore formation process.  相似文献   

准噶尔盆地腹部地区生烃增压定量化评价——东道海子北凹陷为例          下载免费PDF全文

于春勇郭小文  任战利任文波 杨桂林 《地质科学》2018,(1):207-220

目前准噶尔盆地腹部地区超压演化过程仅提供了相对时间、概念、定性的认识,并未达到定量化。本文以东道海子北凹陷为例,基于流体包裹体、单井一维和剖面二维烃源岩成熟生烃史模拟技术,采用生烃增压模型定量化评价了侏罗纪八道湾组顶部和底部烃源岩的生烃增压演化过程。研究结果表明侏罗纪八道湾组为东道海子北凹陷主力烃源岩,具有幕式排烃的特点。八道湾组底部烃源岩经历了3 次超压增加和两次超压释放的过程,顶部烃源岩经历了两次超压增加和一次超压释放的过程。八道湾底部烃源岩3 次超压增加的时间分别为距今170～70 Ma、55～23 Ma、10～0 Ma,对应最大压力系数均为2.0,最大剩余流体压力50 MPa,两次超压释放的时间分别为70～55 Ma、23～10 Ma;八道湾组顶部烃源岩两次超压增加的时间分别为130～40 Ma、23～0 Ma,对应流体最大压力系数最大亦可达2.0 左右,最大剩余流体压力44 MPa,超压释放的时间为40～23 Ma。  相似文献   

Evaluation of effectiveness of three fuzzy systems and three texture extraction methods for building damage detection from post-event LiDAR data     

Milad Janalipour 《International Journal of Digital Earth》2018,11(12):1241-1268

Building damage maps after disasters can help us to better manage the rescue operations. Researchers have used Light Detection and Ranging (LiDAR) data for extracting the building damage maps. For producing building damage maps from LiDAR data in a rapid manner, it is necessary to understand the effectiveness of features and classifiers. However, there is no comprehensive study on the performance of features and classifiers in identifying damaged areas. In this study, the effectiveness of three texture extraction methods and three fuzzy systems for producing the building damage maps was investigated. In the proposed method, at first, a pre-processing stage was utilized to apply essential processes on post-event LiDAR data. Second, textural features were extracted from the pre-processed LiDAR data. Third, fuzzy inference systems were generated to make a relation between the extracted textural features of buildings and their damage extents. The proposed method was tested across three areas over the 2010 Haiti earthquake. Three building damage maps with overall accuracies of 75.0%, 78.1% and 61.4% were achieved. Based on outcomes, the fuzzy inference systems were stronger than random forest, bagging, boosting and support vector machine classifiers for detecting damaged buildings.  相似文献   

准噶尔盆地南缘白垩系—古近系烃源岩地球化学特征及潜力评价     

高剑雄 《地质论评》2021,67(Z1):67z1219-67z1221

  相似文献   

Water waves generated by instantaneous disturbances at the bed of a sloping beach     

Rumpa Chakraborty 《地球物理与天体物理流体动力学》2013,107(5):481-496

The two-dimensional problem of the generation of water waves due to instantaneous disturbances prescribed at the bed of a beach sloping at an arbitrary angle is studied here. It is formulated in terms of an initial-boundary-value problem for the velocity potential describing the motion in the fluid region assuming the linear theory. Using the Laplace transform in time and the Mellin transform in distance, the problem is reduced to solving a difference equation whose method of solution is of considerable importance in the literature. The form of the free surface is obtained in terms of a multiple infinite integral that is evaluated by the method of steepest-descent. For some prescribed forms of the disturbance at the bed of the beach, the free surface is depicted in a number of figures for different beach angles. It is observed that as the beach angle decreases, the maximum wave height increases, which is plausible.  相似文献   

Gas generation and expulsion characteristics of Middle–Upper Triassic source rocks,eastern Kuqa Depression,Tarim Basin,China: implications for shale gas resource potential     

P. Wang  X. Chen  J. Li  H. Yang  F. Jiang 《Australian Journal of Earth Sciences》2013,60(7):1001-1013

Frontier exploration in the Kuqa Depression, western China, has identified the continuous tight-sand gas accumulation in the Lower Cretaceous and Lower Jurassic as a major unconventional gas pool. However, assessment of the shale gas resource in the Kuqa Depression is new. The shale succession in the Middle–Upper Triassic comprises the Taliqike Formation (T₃t), the Huangshanjie Formation (T₃h) and the middle–upper Karamay Formation (T_2–3k), with an average accumulated thickness of 260 m. The high-quality shale is dominated by type III kerogen with high maturity and an average original total organic carbon (TOC) of about 2.68 wt%. An improved hydrocarbon generation and expulsion model was applied to this self-contained source–reservoir system to reveal the gas generation and expulsion (intensity, efficiency and volume) characteristics of Middle–Upper Triassic source rocks. The maximum volume of shale gas in the source rocks was obtained by determining the difference between generation and expulsion volumes. The results indicate that source rocks reached the hydrocarbon expulsion threshold of 1.1% VR and the hydrocarbon generation and expulsion reached their peak at 1.0% VR and 1.28% VR, with the maximum rate of 56 mg HC/0.1% TOC and 62.8 mg HC/0.1% TOC, respectively. The volumes of gas generation and expulsion from Middle–Upper Triassic source rocks were 12.02 × 10¹² m³ and 5.98 × 10¹² m³, respectively, with the residual volume of 6.04 × 10¹² m³, giving an average gas expulsion efficiency of 44.38% and retention efficiency of 55.62%. Based on the gas generation and expulsion characteristics, the predicted shale gas potential volume is 6.04 × 10¹² m³, indicating a significant shale gas resource in the Middle–Upper Triassic in the eastern Kuqa Depression.  相似文献   

Pulse generation models for daily intermittent streamflows / Modèles de génération d’impulsions pour des débits journaliers intermittents     

《水文科学杂志》2013,58(3)

Abstract

Abstract Generating pulses and then converting them into flow are two main steps of daily streamflow generation. Three pulse generation models have been proposed on the basis of Markov chains for the purpose of generating daily intermittent streamflow time series in this study. The first one is based on two two-state Markov chains, whereas the second uses a three-state Markov chain. The third model uses harmonic analysis and fits Fourier series to the three-state Markov chain. Results for a daily intermittent streamflow data series show a good performance of the proposed models.  相似文献