Early development of strike-slip faulting: palaeoseismic study along the Petersen Mountain fault,northern Walker Lane,Nevada     

Conni De Masi  Rich Koehler  Seth Dee  Amanda Keen-Zebert 《第四纪科学杂志》2021,36(3):403-414

Characterising youthful strike-slip fault systems within transtensional regimes is often complicated by the presence of tectonic geomorphic features produced by normal faulting associated with oblique extension. The Petersen Mountain fault in the northern Walker Lane tectonic province exhibits evidence of both normal and strike-slip faulting. We present the results of geologic and geomorphic mapping, and palaeoseismic trenching that characterise the fault's style and sense of deformation. The fault consists of two major traces. The western trace displaces colluvial, landslide, and middle to late Pleistocene alluvial fans and is associated with aligned range front saddles, linear drainages, and oversteepened range front slopes. The eastern trace is associated with a low linear bedrock ridge, a narrow graben, right deflected stream channels, and scarps in late Pleistocene alluvial fan deposits. A trench on the eastern trace of the fault exposed a clear juxtaposition of disintegrated granodiorite bedrock against sand and boulder alluvial fan deposits across a steeply east-dipping fault. The stratigraphic evidence supports the occurrence of at least one late Pleistocene earthquake with a component of lateral displacement. As such, the Petersen Mountain fault accommodates part of the ~7 mm/yr of dextral shear distributed across the northern Walker Lane.  相似文献   

GNSS相应坐标系之间的关系及其影响     

曾安敏  杨元喜  明锋  景一帆 《测绘科学技术学报》2016,(6):551-556

不同的GNSS采用的坐标系定义几乎相近,但参考椭球及其坐标实现不同,这将影响多GNSS融合导航定位效果。根据各GNSS坐标系所采用参考椭球的基本常数,计算比较了不同坐标系参考椭球参数的差异;导出了相应的正常重力公式,比较了这些正常重力公式确定的正常重力值差异;最后分别从坐标系统的定义与实现两个方面分析了其对定位结果的影响。结果表明:1)GPS(BDS)与Galileo和GLONASS所使用的参考椭球引起正常重力差约为0.15和0.30 mgal;2)GPS与BDS,Galileo及GLONASS所使用参考椭球引起纬度分量最大差异约为0.1 mm,3 cm和3 cm,高程分量约为0.1 mm,0.5 m和1 m;3)各GNSS所使用坐标框架间转换参数引起的坐标变化达到厘米级。  相似文献   

Smoothing and re-roughening processes: The geometric evolution of a single fault zone     

《Journal of Structural Geology》2016

The geometry of a fault zone exerts a major control on earthquake rupture processes and source parameters. Observations previously compiled from multiple faults suggest that fault surface shape evolves with displacement, but the specific processes driving the evolution of fault geometry within a single fault zone are not well understood. Here, we characterize the deformation history and geometry of an extraordinarily well-exposed fault using maps of cross-sectional exposures constructed with the Structure from Motion photogrammetric method. The La Quinta Fault, located in southern California, experienced at least three phases of deformation. Multiple layers of ultracataclasite formed during the most recent phase. Crosscutting relations between the layers define the evolution of the structures and demonstrate that new layers formed successively during the deformation history. Wear processes such as grain plucking from one layer into a younger layer and truncation of asperities at layer edges indicate that the layers were slip zones and the contacts between them slip surfaces. Slip surfaces that were not reactivated or modified after they were abandoned exhibit self-affine geometry, preserving the fault roughness from different stages of faulting. Roughness varies little between surfaces, except the last slip zone to form in the fault, which is the smoothest. This layer contains a distinct mineral assemblage, indicating that the composition of the fault rock exerts a control on roughness. In contrast, the similar roughness of the older slip zones, which have comparable mineralogy but clearly crosscut one another, suggests that as the fault matured the roughness of the active slip surface stayed approximately constant. Wear processes affected these layers, so for roughness to stay constant the roughening and smoothing effects of fault slip must have been approximately balanced. These observations suggest fault surface evolution occurs by nucleation of new surfaces and wear by competing smoothing and re-roughening processes.  相似文献   

加强矿业供给侧结构性改革的初步思考     

张福良  季洪伟 《地质论评》2016,62(S1):143-144

当前我国正处经济增速减缓的新常态,供给侧结构性改革应运而生。我国乃至世界的矿业更是处于发展的严冬之季,产能严重过剩,大宗商品价格持续走低。在当前形势下,我们要用新常态眼光看待矿业未来发展之路,因地制宜,着力加强供给侧改革,刻不容缓。  相似文献   

Effects of low- to high-angle normal faults on sedimentary architectures in the Eocene Wenchang Formation,Enping Sag,Pearl River Mouth Basin,South China Sea     

Q. H. Liu  Y. Shu  X. M. Zhu  X. H. Yang  M. Tan 《Australian Journal of Earth Sciences》2016,63(7):903-922

The effects of low- to high-angle (>30°) normal faults on sedimentary architectural units in the Eocene Wenchang Formation, Enping Sag, Pearl River Mouth Basin (PRMB), South China Sea were investigated utilising a high-quality 3D seismic data set and restored paleogeomorphology. It has been shown that sequence stratigraphic units and sedimentary architecture are significantly controlled by the low- to high-angle normal faults. The Wenchang Formation, a second-order sequence, can be subdivided into two para-second-sequences (the Lower and Upper Wenchang sequences, E₂W^L and E₂W^U) and seven third-order sequences (from base to top: SQ1～SQ7). The low-angle fault confined sequence architecture of the Wenchang Formation is mainly characterised by lateral stacking with the ratio of the vertical subsidence (V) to horizontal slip (H) being reduced from 1/2 for E₂W^L to 1/6 for E₂W^U. In contrast, the high-angle fault confined sequence is characterised by vertical stacking with the ratio of V/H close to 1 for sequences SQ1 to SQ7. In the 3D seismic area, the features of sediment-dispersal pattern were interpreted based on an integrated analysis of paleogeomorphology, seismic reflection characteristics, stratal thickness distribution and multiple attribute clustering. The results show that the large-scale fan delta, belt-shape lacustrine deposit and bird-foot braided delta systems mainly developed in the low-angle fault confined sequences, whereas small-scale fan delta, rhombus-shaped lacustrine deposit and lobe-shaped braided delta systems inherited tectono-sedimentary architectures in the high-angle fault confined sequences.  相似文献   

闽西北5月雨量特多年份环流特征及其成因分析     

章达华  张家斌  邝美清  沈永生  卜银军  吴姗 《气象科技》2016,44(1):61-66

利用闽西北三明市的11个县、市1961—2014年5月降雨量资料、常规气象观测资料和NCEP 2.5×2.5°再分析资料等对闽西北历史上5月雨量特多年的降雨量时空分布特征和大气环流特征及其成因进行了分析,结果表明:5月区域性、全区性雨量特多年的环流异常特征是500hPa欧亚中高纬度自西向东环流呈"+-+"的波列分布,鄂霍次克海北侧高度正距平区的稳定少动,起到阻挡冷空气东移的作用,冷空气沿乌拉尔山西侧高度正距平中心前的偏北气流不断南下,使萨彦岭一带高度负距平中心加强,其底部不断分裂小槽东移影响闽西北。925hPa华南北部维持一条稳定切变线;对于2014年5月特例的环流形势分析结果可知,500hPa东亚大槽明显偏东,引导冷空气南下与强大副高西北侧西南暖湿气流交绥在闽西北上空。925hPa闽西北处于气旋式辐合区内。北支槽、南支槽均非常活跃,东移影响闽西北,是导致该地5月区域性降雨量特多的主要原因。  相似文献   

Field evidence for normal fault linkage and relay ramp evolution: the Kırkağaç Fault Zone,western Anatolia (Turkey)     

Bora Uzel 《Geodinamica Acta》2016,28(4):311-327

Linking of normal faults forms at all scales as a relay ramp during growth stages and represents the most efficient way for faults to lengthen during their progressive formation. Here, I study the linking of normal faulting along the active K?rka?aç Fault Zone within the west Anatolian extensional system to reconstruct fault interaction in time and space using both field- and computer-based data. I find that (i) connecting of the relay zone/ramp occurred with two breaching faults of different generations and that (ii) the propagation was facilitated by the presence of pre-existing structures, inherited from the ?zmir-Bal?kesir transfer zone. Hence, the linkage cannot be compared directly to a simple fault growth model. Therefore, I propose a combined scenario of both hangingwall and footwall fault propagation mechanisms that explain the present-day geometry of the composite fault line. The computer-based analyses show that the approximate slip rate is 0.38 mm/year during the Quaternary, and a NE–SW-directed extension is mainly responsible for the recent faulting along the K?rka?aç Fault Zone. The proposed structural scenario also highlights the active fault termination and should be considered in future seismic hazard assessments for the region that includes densely populated settlements.  相似文献   

我国地质钻探现状和发展前景分析          下载免费PDF全文

王达  李艺  周红军  刘跃进  张林霞  孙建华 《探矿工程》2016,43(4):1-9

我国经济社会发展已步入“新常态”。作为地质调查和矿产勘查工作重要技术支撑的地质钻探行业,资金投入显著减少,地质钻探工作量大幅下滑,常规钻探施工产能过剩;另一方面,地质钻探新的服务领域不断扩大,包括深部科学钻探,地热能及非常规能源勘查,海洋、灾害防治、生态环境、地外天体、极地方面的钻探等。如何应对地勘行业出现的问题,是全行业共同面对的挑战。在对当前及今后一段时期地质钻探工程面临的困难、挑战和机遇等进行调研分析的基础上,对我国地质钻探未来的发展前景进行了预测,认为地质钻探工作量将进一步减少,新领域、新业态的钻探工程及先进钻探技术和装备需求将进一步加大,更加贴近国家需求,更加注重环保理念。  相似文献   

黔东松桃地区燕山期构造特征研究——以高地超大型锰矿床为例   总被引：2，自引：0，他引：2  

谢小峰  杨坤光  钱山  袁良军 《地质论评》2018,64(3):623-632

黔东松桃地区构造格局主要是受到燕山运动影响形成。燕山早期,区内处于SEE—NWW向区域挤压收缩,形成了NNE—SSW向褶皱和断裂。下寒武统杷榔组—变马冲组地层和南华系下统大塘坡组地层作为两套滑脱层,在构造变形过程中起到滑脱作用,滑脱层内褶皱变形强烈,以大量紧闭、顶厚不协调褶皱为主要构造样式,而其上、下岩层则以断块或宽缓褶皱变形为主,以软弱层为界面,其上、下岩层发生逆冲滑脱作用,形成了区内隔槽式褶皱的构造样式。燕山晚期,区内处于NNE—SSW挤压为主,形成了区内NWW向小型褶皱和断裂,同时燕山晚期构造横跨叠加在早期变形之上,导致早期NNE向褶皱枢纽呈波状起伏,轴迹弯曲,部分地区形成了构造穹窿和构造盆地,部分早期断层呈左行走滑性质。在燕山早、晚两期构造作用下,高地矿区含锰岩系作为软弱滑脱层,向猴子坳向斜的核部进行滑脱聚集,使其在向斜的核部富集,翼部相对减薄。同时,由于犁式正断层的存在,也影响了锰矿层的保存与破坏。  相似文献   

Early growth fault activity: new evidence for extension in the upper Cambrian Owen Group,Proprietary Peak,western Tasmania,Australia     

M. J. O'Mara  S. A. Mahmud  M. Hall 《Australian Journal of Earth Sciences》2018,65(2):209-220

The coarse-grained, upper Cambrian Owen Group of western and northern Tasmania is a prominent feature of the Tasmanian landscape and regional map series. The group has previously been divided into four informal formations (Lower Owen Conglomerate, Middle Owen Sandstone, Middle Owen Conglomerate and Upper Owen Sandstone) that have been correlated across the state over tens to hundreds of kilometres. The deposition of these sediments is largely believed to have occurred during extensional tectonics, but some authors continue to argue a compressional tectonic regime. Detailed mapping and sedimentological work around Proprietary Peak on the Mount Jukes massif, 10 km south of Queenstown, Tasmania, has identified significant depositional variations controlled by early growth faulting and paleotopography. Discontinuity of stratigraphic units (L6–L13) across two growth faults on the north face of Proprietary Peak shows the strong effect on sediment deposition in the area. Paleotopography is also evident with most stratigraphic units (L8–L13 and U1) gradually onlapping basement during their deposition. Significant paleotopography has also been identified on East Jukes Peak, where lower Owen Group sedimentary units onlap basement volcanics, with no evidence for tectonically controlled deposition. Field evidence strongly supports the deposition of the Owen Group during extensional tectonics, after a period of prolonged erosion of the underlying Mount Read Volcanics. The distinct variation in vertical and lateral extent of stratigraphic units within the Owen Group in the Proprietary Peak area suggests that widespread lithostratigraphic correlation of older Owen Group sedimentary units across Tasmania may not be feasible.  相似文献