排序方式：
出版年(降序)
出版年(升序)
被引次数(降序)
被引次数(升序)
更新时间(降序)
更新时间(升序)
杂志中文名(升序)
杂志中文名(降序)
杂志英文名(升序)
杂志英文名(降序)
作者中文名(升序)
作者中文名(降序)
作者英文名(升序)
作者英文名(降序)
相关性
共有1888条查询结果，搜索用时 31 毫秒
31.
通过对渤海湾西岸L剖面中同一关键层的碳酸钙和原生腹足类壳债权的^14C测年对比研究，确定了晚全新世的2800cal BP的层位及沉积速率0.045cm/a;8个样柱的^137Cs和^210Pbex强度、蓄积量揭示了距今约120年来堤后盐沼的平均沉积速率约为0.35cm/a，而面向开放海湾的潮坪上部则达到约2-3cm/a。研究区近1个世纪以来沉积速率的加速趋势，是渤海湾西岸泥质海岸带的特征之一。
相似文献
32.
基于现行《建筑抗震设计规范》（GB50011－2001），本文分析了现行抗震设计中影响结构设计地震作用效应的主要因素，以规则平面框架对例对新旧规范影响结构设计地震作用效应的因素进行了对比，给出了其间的重要变化和基本规律。
相似文献
33.
系统研究了AR和ARMA时间序列方法生成给定加速度功率谱人工地震波的新方法，根据相应理论编制了程序，并生成了人工地震加速时程曲线，然后用生成的人工地震波进行结构动力时程分析，与实际地震波分析的结果进行了对比，计算结果表明，本文用于合成人工地震波的方法是可行的，生成的人工波可以用于实际结构的地震反应分析。
相似文献
34.
以某医院住院部大楼为例进行结构抗震性能评价，首先分析了场址的地震环境，开展了地震危险性分析工作，合成了不同地震危险水平下的地震动加速度时程。进而，通过对结构的模型简化，应用时程分析方法分析结构的抗震性能，得出了一些对其改造加固有意义的结论。
相似文献
35.
设计海底大地电磁信号采集电路，需考虑海底信号特征、海上作业以及海底环境等各种因素。分析表明，除遵循电路设计的一般原则外，海底大地电磁测量要重点解决微弱信号检测、智能化数据采集、海底环境监测和同步记录等4个方面的问题。在设计方案中，电路灵敏度达到微伏级；使用嵌入式计算机实现采集控制；对方位、倾斜、振动、温度等参数进行巡回记录；仪器的时钟精度精准到微秒。所研制的电路经过了室内模拟测试和海洋试验。首次采集到中国海域的大地电磁数据。
相似文献
36.
The five MTMD models, with natural frequencies being uniformly distributed around their mean frequency, have been recently presented by the first author. They are shown to have the near‐zero optimum average damping ratio (more precisely, for a given mass ratio there is an upper limit on the total number, beyond which the near‐zero optimum average damping ratio occurs). In this paper, the eight new MTMD models (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1～US‐MTMD3, UD‐MTMD1 and UD‐MTMD2), with the system parameters (mass, stiffness and damping coefficient) being, respectively, uniformly distributed around their average values, have been, for the first time here, proposed to seek for the MTMD models without the near‐zero optimum average damping ratio. The structure is represented by the mode‐generalized system corresponding to the specific vibration mode that needs to be controlled. Through minimization of the minimum values of the maximum dynamic magnification factors (DMF) of the structure with the eight MTMD models (i.e. through the implementation of Min.Min.Max.DMF), the optimum parameters and values of Min.Min.Max.DMF for these eight MTMD models are investigated to evaluate and compare their control performance. The optimum parameters include the optimum mass spacing, stiffness spacing, damping coefficient spacing, frequency spacing, average damping ratio and tuning frequency ratio. The six MTMD models without the near‐zero optimum average damping ratio (i.e. the UM‐MTMD1～UM‐MTMD3, US‐MTMD1, US‐MTMD2 and UD‐MTMD2) are found through extensive numerical analyses. Likewise, the optimum UM‐MTMD3 offers the higher effectiveness and robustness and requires the smaller damping with respect to the rest of the MTMD models in reducing the responses of structures subjected to earthquakes. Additionally, it is interesting to note, by comparing the optimum UM‐MTMD3 with the optimum MTMD‐1 recently investigated by the first author, that the effectiveness and robustness for the optimum UM‐MTMD3 is almost identical to that for the optimum MTMD‐1 (without inclusion of the optimum MTMD‐1 with the near‐zero optimum average damping ratio). Recognizing these performance benefits, it is preferable to employ the optimum UM‐MTMD3 or the optimum MTMD‐1 without the near‐zero optimum average damping ratio, when installing the MTMD for the suppression of undesirable oscillations of structures under earthquakes. Copyright © 2003 John Wiley & Sons, Ltd.
相似文献
37.
综合分析前人的热年代学数据发现华山地区自晚白垩世以来至少经历了三次快速隆升阶段，在120—57Ma间华山经历了缓慢隆升过程，约57Ma以来华山开始相对渭河地堑的快速隆升。其中，57—42Ma间、32—22Ma间和约8Ma以来均为相对快速隆升阶段，视隆升速度约为0．18～0．23mm／a；而42—32Ma问和22～8Ma间则为相对缓慢隆升过程，视隆升速度约为0．01mm／a。约57Ma以来华山的隆升—剥蚀量约为8．5km，平均隆升速度约为0．15mm／a；约32Ma以来的总隆升幅度约为4．5～5．1km，平均视隆升速度约为0．14～0．16mm／a。晚中生代以来华山的隆升过程实际上反映的是东秦岭的隆升过程，与区域地貌结构和周缘断陷盆地的演化过程有密切的成因联系，它表明东秦岭地区的三级等高峰顶面是120—57Ma、42—32Ma和22～8Ma间山脉缓慢隆升—剥蚀的结果，同时反映57—55Ma是渭河盆地开始快速裂陷和秦岭北麓正断层开始强烈活动的时间。
相似文献
38.
加速度传感器测量卫星所受非引力加速度的精度是利用该技术精确恢复重力场的重要指标。根据卫星运动理论 ,给出了轨道升交点赤经摄动、近升距摄动、卫星运动、坐标轴旋转引起的加速度性质以及相应表达式。针对CHAMP卫星轨道 ,讨论了各项的影响量级
相似文献
39.
The design of a drainage system for a roofing slate quarry was implemented by the enhancement of discharge peak estimation, and the uncertainty inevitably associated with the engineering model was reduced.
The development of a topographical, geological, and vegetation cover database developed from a Geographical Information System (GIS) allowed for the definition of the drainage network for a hydraulic system, along with the calculation of the runoff coefficient. This is applied to the digital model of accumulated flow (DMF) as a weight correction coefficient, using a matrix-based model at 5×5 m resolution. The new digital model of corrected accumulated flow (DMCF) is the result of combining the thematic maps with the map of slope <3%, which was previously created from the slope model. It is demonstrated that this new model allows to apply the “Rational Method” on cartographic units defined by the GIS.
The DMCF is compared with other traditional applications of the Rational Method based on the calculation of the discharge peak considering: (1) the drainage basin as a single watershed or (2) defining an average runoff coefficient in each sub-watershed. Both approaches have bigger discharge peaks than those obtained by the DMCF since the slope, lithology, and vegetation cover have average values, and the runoff coefficient is poorly defined, increasing the uncertainty in the discharge peak. 相似文献
40.
本文结合淮北杨庄矿某工作面实际工程情况, 利用NCAP-2D-W对煤层底板突水进行多方案的数值模拟试验研究。主要内容包括:(1) 考虑在承压水不变的条件下,设计不同裂隙分布状态,探讨单裂隙、多裂隙、不同长度裂隙对煤层底板破坏的影响及开采矿压对裂隙顶部破坏的影响;(2) 考虑承压水的变化,分别考虑单裂隙和多裂隙两种分布状态,探讨裂隙对煤层底板破坏的影响及开采矿压对裂隙底部破坏的影响。通过分析受采动荷载、岩层结构变化、煤层底板中裂隙分布状态及承压水变化等因素影响的数值试验,获得了随开采工作面不断推进煤层底板破坏区的发展、突水导升高度的递增、突水通道的形成等相关规律。
相似文献
