Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings     

Nicolas Luco  Yasuhiro Mori  Yosuke Funahashi  C. Allin Cornell  Masayoshi Nakashima 《地震工程与结构动力学》2003,32(14):2267-2288

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

变参考慢度Born近似傅氏偏移   总被引：1，自引：0，他引：1  

杜正聪  贺振华  王志  黄德济 《吉林大学学报(地球科学版)》2003,33(4):555-558

针对常规Born近似傅氏偏移方法对于剧烈横向变速介质不能精确成像的状况而提出了变参考慢度Born近似傅氏偏移，理论上解决了任意速度变化地质模型的偏移成像问题。此外，为进一步提高复杂地层的成像精度和波场延拓算子的稳定性，对散射波场的计算公式作了改进。将改进的方法运用于盐丘模型的正演和偏移试验，并与常规Born近似偏移方法相比较，可明显看出变参考慢度Born近似傅氏偏移方法在效果上要优于后者，其处理速度横向变化的能力大大增强。  相似文献   

A procedure for evaluating seismic energy demand of framed structures     

Chung‐Che Chou  Chia‐Ming Uang 《地震工程与结构动力学》2003,32(2):229-244

Energy serves as an alternative index to response quantities like force or displacement to include the duration‐related seismic damage effect. A procedure to evaluate the absorbed energy in a multistorey frame from energy spectra was developed. For low‐ to medium‐rise frames, it required a static pushover analysis of the structure to determine the modal yield force and ductility factor of an equivalent single‐degree‐of‐freedom system for the first two modes. The energy spectra were then used to determine the energy contribution of each mode. A procedure was also developed to distribute the energy along the frame height based on energy shapes. This study showed that the second‐mode response in some cases needs to be considered to reflect the energy (or damage) concentration in the upper floors. Copyright © 2002 John Wiley & Sons, Ltd.  相似文献   

GLONASS导航电文介绍   总被引：3，自引：0，他引：3  

李建文  李军正 《全球定位系统》2003,28(3):31-36

主要介绍GLONASS导航电文的结构、内容、参数、定义及意义，GLONASS与GPS导航电文的异同。  相似文献   

基于GPS基准站网的GPS测量   总被引：5，自引：0，他引：5  

胡丛玮  刘大杰 《现代测绘》2003,26(1):10-13

采用基于GPS基准网的GPS测量可以提高GPS测量的可靠性和准确性 ,可以消除和减小GPS测量观测值中与时间和空间相关的大气误差和轨道误差的影响 ,使中、长距离快速静态定位和RTK动态定位成为现实 ,还具有可直接得到WGS84Z坐标等优点。本文介绍基于GPS基准站网的GPS测量 ,简要地论述GPS虚拟参考站法VRS和区域改正数法FKP的原理、方法和特点 ,以及目前实施中存在的一些问题  相似文献   

Laser Ablation ICP-MS Analysis of Geological Materials Prepared as Lithium Borate Glasses   总被引：9，自引：0，他引：9  

Stephen M. Eggins 《Geostandards and Geoanalytical Research》2003,27(2):147-162

A simple, rapid and precise method is described for determining trace elements by laser ablation (LA)-ICP-MS analysis in bulk geological materials that have been prepared as lithium borate glasses following standard procedures for XRF analysis. This approach reliably achieves complete sample digestion and provides for complementary XRF and LA-ICP-MS analysis of a full suite of major and trace elements from a single sample preparation. Highly precise analysis is enabled by rastering an ArF excimer laser (λ= 193nm) across fused samples to deliver a constant sample yield to the mass spectrometer without inter-element fractionation effects during each analysis. Capabilities of the method are demonstrated by determination of twenty five trace elements (Sc, Ti, V, Ga, Rb, Sr, Y, Zr, Nb, Cs, Ba, REE, Hf, Ta, Pb, Th and U) in a diverse range of geological reference materials that includes peridotites, basalts, granites, metamorphic rocks and sediments. More than 90% of determinations are indistinguishable from published reference values at the 95% confidence level. Systematic bias greater than 5% is observed for only a handful of elements (Zr, Nb and U) and may be attributed in part to inaccurate calibration values used for the NIST SRM 612 glass in the case of Zr and Nb. Detection limits for several elements, most notably La, are compromised at ultra-trace levels by impurities in the lithium borate flux but can be corrected for by subtracting appropriate procedural blanks. Reliable Pb analysis has proved problematic due to variable degrees of contamination introduced during sample polishing prior to analysis and from Pt-crucibles previously used to fuse Pb-rich samples. Scope exists for extending the method to include internal standard element/isotope spiking, particularly where integrated XRF analysis is not available to characterise major and trace elements in the fused lithium borate glasses prior to LA-ICP-MS analysis.  相似文献   

A Reappraisal of Rb, Y, Zr, Pb and Th Values in Geochemical Reference Material BHVO-1     

William J. Chazey III  Clive R. Neal  Jinesh C. Jain  William S. Kinman 《Geostandards and Geoanalytical Research》2003,27(2):181-192

The geochemical reference material BHVO-1 was analysed by a variety of techniques over a six year period. These techniques included inductively coupled plasma-mass spectrometry and atomic emission spectroscopy (ICP-MS and ICP-AES, respectively), laser ablation ICP-MS and spark source mass spectroscopy. Inconsistencies between the published consensus values reported by Gladney and Roelandts (1988, Geostandards Newsletter) and the results of our study are noted for Rb, Y, Zr, Pb and Th. The values reported here for Rb, Y, Zr and Pb are generally lower, while Th is higher than the consensus value. This is not an analytical artefact unique to the University of Notre Dame ICP-MS facility, as most of the BHVO-1 analyses reported over the last ten to twenty years are in agreement with our results. We propose new consensus values for each of these elements as follows: Rb = 9.3 ± 0.2 μg g-1 (compared to 11 ± 2 μg g-1), Y = 24.4 ± 1.3 μg g-1 (compared to 27.6 ± 1.7 μg g-1), Zr = 172 ± 10 μg g-1 (compared to 179 ± 21 μg g-1), Pb = 2.2 ± 0.2 μg g-1 (compared to 2.6 ± 0.9 μg g-1) and Th = 1.22 ± 0.02 μg g-1 (compared to 1.08 ± 0.15 μg g-1).  相似文献   

Geoid determination using adapted reference field, seismic Moho depths and variable density contrast   总被引：4，自引：0，他引：4  

H. A. Abd-Elmotaal  N. Kühtreiber 《Journal of Geodesy》2003,77(1-2):77-85

 The traditional remove-restore technique for geoid computation suffers from two main drawbacks. The first is the assumption of an isostatic hypothesis to compute the compensation masses. The second is the double consideration of the effect of the topographic–isostatic masses within the data window through removing the reference field and the terrain reduction process. To overcome the first disadvantage, the seismic Moho depths, representing, more or less, the actual compensating masses, have been used with variable density anomalies computed by employing the topographic–isostatic mass balance principle. In order to avoid the double consideration of the effect of the topographic–isostatic masses within the data window, the effect of these masses for the used fixed data window, in terms of potential coefficients, has been subtracted from the reference field, yielding an adapted reference field. This adapted reference field has been used for the remove–restore technique. The necessary harmonic analysis of the topographic–isostatic potential using seismic Moho depths with variable density anomalies is given. A wide comparison among geoids computed by the adapted reference field with both the Airy–Heiskanen isostatic model and seismic Moho depths with variable density anomaly and a geoid computed by the traditional remove–restore technique is made. The results show that using seismic Moho depths with variable density anomaly along with the adapted reference field gives the best relative geoid accuracy compared to the GPS/levelling geoid. Received: 3 October 2001 / Accepted: 20 September 2002 Correspondence to: H.A. Abd-Elmotaal  相似文献   

建设我国现代大地测量基准的思考   总被引：7，自引：0，他引：7  

陈俊勇 《武汉大学学报(信息科学版)》2003,(Z1)

建设现代大地测量基准方面的进展主要表现在IGS服务和ITRF的系列精化 ,ITRF2 0 0 0是ITRF中迄今最为精确、测站最为稠密的地面坐标参考框架 ;2 0 0 1年推出新的WGS84,其成果标以WGS84(G1 1 5 0 )。考虑和顾及现代大地测量的特点 ,结合中国实际 ,我国现代大地测量基准应着重考虑四个方面的基本要素 :高精度、涵盖全部陆海国土、三维、动态。建设我国现代大地测量基准是为用户在我国任何地点、任何时间提供及时、可靠、适用的地理空间基础框架 ,其任务应包括建立我国现代化的平面基准、高程基准和重力基准等。  相似文献   

国家地理空间信息基准框架工程建设     

张燕平  张全德  张江齐  岳建利 《武汉大学学报(信息科学版)》2003,(Z1)

提出了国家地理空间信息基准框架内改进与更新原有的大地坐标基准、高程基准和重力基准的建设道路及解决原则。  相似文献