Crustal Stress Measurement for Significant Project Construction and Its Application in Design     

Guo Qiliang 《中国地震研究》2007,21(3):345-354

The hydrofracturing technique has developed into a reliable and practical method for determining the original three-dimensional crustal stress state of underground caverns,the load-bearing capacity of a high pressure cavern itself,and the high pressure hydraulic permeability of rock masses,and has also been extensively used in disposal of nuclear waste,long and deeply-buried traffic channels and high-pressure cavern engineering for hydraulic power plants.The practice shows that the comprehensive measurement of the physical parameters of the rock mass and taking full use of the wall rock load-bearing capacity to optimize the engineering design hold are very useful in ensuring the engineering safety and improving the design level.  相似文献   

位场曲化平的插值-迭代法   总被引：10，自引：5，他引：10       下载免费PDF全文

徐世浙  余海龙 《地球物理学报》2007,50(6):1811-1815

将起伏曲面B上的位场向下延拓至曲面最低点的平面A的插值-迭代法步骤是：1）将曲面B上的场值放置在水平面A上具有相同水平坐标的点上，作为A上的初值；2）用若干水平面切割B，从A的初值，用快速傅里叶变换法(FFT)向上延拓出这些平面的场值，用插值的方法从这些平面的场值计算曲面B的场值；3）根据B上的实测值与计算值的差值，对A上的值进行加权改正；4）重复步骤2）和3），直到B上的差值小到可以忽略.这种插值-迭代法具有高的计算速度，比通常的FFT法延拓得更深，可以超过10倍点距.文中给出计算实例.  相似文献   

Automatic Interpretation of Magnetic Data Using Euler Deconvolution with Nonlinear Background   总被引：1，自引：0，他引：1  

Pawan Dewangan  T. Ramprasad  M. V. Ramana  M. Desa  B. Shailaja 《Pure and Applied Geophysics》2007,164(11):2359-2372

The voluminous gravity and magnetic data sets demand automatic interpretation techniques like Naudy, Euler and Werner deconvolution. Of these techniques, the Euler deconvolution has become a popular choice because the method assumes no particular geological model. However, the conventional approach to solving Euler equation requires tentative values of the structural index preventing it from being fully automatic and assumes a constant background that can be easily violated if the singular points are close to each other. We propose a possible solution to these problems by simultaneously estimating the source location, depth and structural index assuming nonlinear background. The Euler equation is solved in a nonlinear fashion using the optimization technique like conjugate gradient. This technique is applied to a published synthetic data set where the magnetic anomalies were modeled for a complex assemblage of simple magnetic bodies. The results for close by singular points are superior to those obtained by assuming linear background. We also applied the technique to a magnetic data set collected along the western continental margin of India. The results are in agreement with the regional magnetic interpretation and the bathymetric expressions.  相似文献   

Source Parameters of the Deadly M<Subscript>w</Subscript> 7.6 Kashmir Earthquake of 8 October, 2005     

Prantik Mandal  R. K. Chadha  N. Kumar  I. P. Raju  C. Satyamurty 《Pure and Applied Geophysics》2007,164(10):1963-1983

During the last six years, National Geophysical Research Institute, Hyderabad has established a semi-permanent seismological network of 5–8 broadband seismographs and 10–20 accelerographs in the Kachchh seismic zone, Gujarat with a prime objective to monitor the continued aftershock activity of the 2001 M_w 7.7 Bhuj mainshock. The reliable and accurate broadband data for the 8 October M_w 7.6 2005 Kashmir earthquake and its aftershocks from this network as well as Hyderabad Geoscope station enabled us to estimate the group velocity dispersion characteristics and one-dimensional regional shear velocity structure of the Peninsular India. Firstly, we measure Rayleigh-and Love-wave group velocity dispersion curves in the period range of 8 to 35 sec and invert these curves to estimate the crustal and upper mantle structure below the western part of Peninsular India. Our best model suggests a two-layered crust: The upper crust is 13.8 km thick with a shear velocity (Vs) of 3.2 km/s; the corresponding values for the lower crust are 24.9 km and 3.7 km/sec. The shear velocity for the upper mantle is found to be 4.65 km/sec. Based on this structure, we perform a moment tensor (MT) inversion of the bandpass (0.05–0.02 Hz) filtered seismograms of the Kashmir earthquake. The best fit is obtained for a source located at a depth of 30 km, with a seismic moment, Mo, of 1.6 × 10²⁷ dyne-cm, and a focal mechanism with strike 19.5°, dip 42°, and rake 167°. The long-period magnitude (M_A ~ M_w) of this earthquake is estimated to be 7.31. An analysis of well-developed sPn and sSn regional crustal phases from the bandpassed (0.02–0.25 Hz) seismograms of this earthquake at four stations in Kachchh suggests a focal depth of 30.8 km.  相似文献   

Effect of surface stress on magneto-elastic surface waves in finitely conducting media     

Debi Pada Acharya  Chaitali Maji 《Acta Geophysica》2007,55(4):554-576

This paper deals with the investigation of the effect of surface stress and conductivity on the propagation of surface wave in isotropic, homogeneous, elastic media under the action of a primary magnetic field. Formulation of the general surface wave propagation problem has been made, and the corresponding frequency equation has been derived. Frequency equations for Rayleigh wave, surface shear wave and Stoneley wave have been deduced from that of general surface wave as special cases. The effects of surface stress and magnetic field on the wave velocities and attenuation factors of Rayleigh wave and surface shear wave are shown by numerical calculations and graphs. Some important wave velocity equations, as obtained by other authors, have been deduced as special cases from the wave velocity equation for Stoneley wave. It is found that the combined effect of surface stress and magnetic field modulates the wave velocity ratios and attenuation factors of Rayleigh wave and surface shear wave to a considerable extent.  相似文献   

Use of variograms for field magnetometry analysis in Upper Silesia Industrial Region     

J. Zawadzki  P. Fabijańczyk 《Studia Geophysica et Geodaetica》2007,51(4):535-550

Measurements of topsoil magnetic susceptibility are often used for quick assessment of soil contamination of anthropogenic origin, with heavy metals or other pollutants. However, because of complicated correlations between low-field magnetic susceptibility (shortened to magnetic susceptibility) of topsoil and soil pollution, the outcome of a field magnetometry survey can not be related directly to soil pollution. For each case study, the results should be interpreted on their own taking into account not only the type of pollution but also pedogenic, biogenic and environmental factors. In practice, it is very difficult to measure and consider all these factors. Here we illustrate the merit of geostatistical methods, which are focused on the spatial variability of a phenomenon, in the interpretation of soil magnetometry results. This article presents the analysis of spatial variability of top soil layers magnetic susceptibility-within the Upper Silesia Industrial Region (USIR)-using semivariance analysis. It also explains how to adjust the sampling density of field magnetometry measurements to spatial variability of the soil pollution as well as to the spatial scale of the investigated area. For this purpose, the values of magnetic susceptibility have been measured by using various sampling densities at areas of different size located within USIR. This enabled to determine the main scales of magnetic susceptibility spatial variability of soils within USIR using semivariance. A few distinct scales of variability were found from the site scale to a more regional scale. Variability ranges of 30 km, 12 km, and 5 km refer to the large regional scale, whereas smaller ranges of few hundreds down to a few tens of meters, can be attributed to the local (site) scale. In addition, the precision of the measuring campaigns, performed within USIR with different sampling densities, was compared through the analysis of the spatial variability of the soil magnetic susceptibility signal by using ordinary kriging. jarek97@yahoo.com, piotr.fabijanczyk@is.pw.edu.pl  相似文献   

Two-dimensional power series solution for non-axisymmetrical transport in a radially convergent tracer test with scale-dependent dispersion     

Jui-Sheng Chen 《Advances in water resources》2007

It has been known for many years that dispersivity increases with solute travel distance in a subsurface environment. The increase of dispersivity with solute travel distance results from the significant variation of hydraulic properties of heterogeneous media and was identified in the literature as scale-dependent dispersion. This study presents an analytical solution for describing two-dimensional non-axisymmetrical solute transport in a radially convergent flow tracer test with scale-dependent dispersion. The power series technique coupling with the Laplace and finite Fourier cosine transform has been applied to yield the analytical solution to the two-dimensional, scale-dependent advection–dispersion equation in cylindrical coordinates with variable-dependent coefficients. Comparison between the breakthrough curves of the power series solution and the numerical solutions shows excellent agreement at different observation points and for various ranges of scale-related transport parameters of interest. The developed power series solution facilitates fast prediction of the breakthrough curves at any observation point.  相似文献   

Modeling doline populations with logistic growth functions   总被引：1，自引：0，他引：1  

Phillip R. Kemmerly 《地球表面变化过程与地形》2007,32(4):587-601

Initiation and evolution of a large karst depression population consisting of parent and daughter dolines were spatially and temporally modeled using logistic growth functions. Logistic growth models are well suited for analyzing doline population initiation and evolution because they reflect the density‐dependent growth mechanisms present in the evolution of karst depressions. Seven assumptions based upon previous studies were refined into mathematical statements and tested using more than 2000 dolines from a subpopulation of both parent and daughter karst depressions on the Western Highland Rim and Pennyroyal Plain of Tennessee and Kentucky. Logistic growth models quantify the initiation and evolution of doline populations and interface well with recent models describing the evolution of three‐dimensional conduit systems. Logistic growth models should apply to modeling other doline populations in karst terranes with hydraulically efficient, three‐dimensional conduit systems. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Sandstone response to salt weathering following simulated fire damage: a comparison of the effects of furnace heating and fire     

S. McCabe  B. J. Smith  P. A. Warke 《地球表面变化过程与地形》2007,32(12):1874-1883

Fire has long been recognized as an agent of rock weathering. Our understanding of the impact of fire on stone comes either from early anecdotal evidence, or from more recent laboratory simulation studies, using furnaces to simulate the effects of fire. This paper suggests that knowledge derived from simulated heating experiments is based on the pre‐conceptions of the experiment designer – when using a furnace to simulate fire, the operator decides on the maximum temperature and the duration of the experiment. These are key factors in determining the response of the stone to fire, and if these are removed from real‐world observations then knowledge based on these simulations must be questioned. To explore the differences between heating sandstone in a furnace and a real fire, sample blocks of Peakmoor Sandstone were subjected to different stress histories in combination (lime rendering and removal, furnace heating or fire, frost and salt weathering). Block response to furnace heating and fire is discussed, with emphasis placed on the non‐uniformity of the fire and of block response to fire in contrast to the uniform response to surface heating in a furnace. Subsequent response to salt weathering (by a 10% solution of sodium chloride and magnesium sulphate) was then monitored by weight loss. Blocks that had experienced fire showed a more unpredictable response to salt weathering than those that had undergone furnace heating – spalling of corners and rapid catastrophic weight loss were evidenced in blocks that had been subjected to fire, after periods of relative quiescence. An important physical side‐effect of the fire was soot accumulation, which created a waxy, relatively impermeable layer on some blocks. This layer repelled water and hindered salt ingress, but eventually detached when salt, able to enter the substrate through more permeable areas, concentrated and crystallized behind it, resulting in rapid weight loss and accelerated decay. Copyright © 2007 John Wiley & Sons, Ltd.  相似文献   

Numerical experiments on the generation of long ocean waves in coastal waters of the Buenos Aires province,Argentina     

Walter C. Dragani 《Continental Shelf Research》2007

A numerical model (two horizontal dimensions, vertically integrated) is used to investigate the generation of long ocean waves, ranging from 20 min to almost 2 h, at Buenos Aires continental shelf. The domain includes the Río de la Plata estuary and the continental shelf together and extends from 33.5° to 40.5°S latitude, and from 51° to 63°W longitude. Sea-level oscillations are modeled by forcing with passage of atmospheric cold fronts and atmospheric gravity waves. Both forcing mechanisms, which have been present during high activity lapses of long ocean waves, are mathematically implemented. After several numerical simulations, it is concluded that the pressure and wind fields associated to cold fronts do not generate long ocean waves in the area, though they do produce disturbances with periods longer than the tidal ones. On the other hand, it is so concluded that atmospheric gravity waves are an effective mechanism to force long ocean waves. Results obtained show that generation of long ocean waves is highly sensitive depending on the propagation direction and the phase speed of the atmospheric gravity waves. The long ocean wave event detected during the large-amplitude gravity-wave event of 13 October 1985 is successfully simulated. Finally, all our results suggest that atmospheric gravity waves are a highly effective mechanism forcing for the generation of long ocean waves in Buenos Aires coastal waters.  相似文献