利用消去刚度法进行剪切型系统物理参数识别     

王树青  李华军 《中国海洋大学学报(自然科学版)》2004,34(6):1085-1089

提出了 1种能够比较准确地识别剪切型体系的结构参数 (各层质量和层间刚度 )的方法———消去刚度法。该方法从剪切型结构体系的特征值问题出发 ,利用剪切型结构系统质量矩阵和刚度矩阵的特殊形式 ,通过消去各层的刚度系数 ,得到了结构系统的各层质量比表达式。在结构总质量已知的情况下 ,仅利用系统的任意两阶模态信息就可以确定出各层质量 ,并进而计算出层间刚度 ,实现了结构物理参数的递推识别。数值模拟结果表明 ,该方法识别精度较高 ,便于工程应用 ,可以用于类似结构体系的物理参数的初步估计。  相似文献   

城市建设中的地震小区划与浅层地震探测     

薛荣俊  辛柏森  杨和乃 《中国海洋大学学报(自然科学版)》1993,(Z1)

简要阐述地震小区划在现代城市建设中的重要性以及在实施地震小区划的研究中浅层地震探测的重要作用及其方法原理,并给出应用浅层地震探测在城市地震小区划中的实例。  相似文献   

耗氧速率(OUR)测量方法的实验研究   总被引：4，自引：0，他引：4  

李冰  孙英兰  李玉瑛 《中国海洋大学学报(自然科学版)》2006,36(3):456-460

目前多采用分批实验法和呼吸测量仪测量耗氧速率,而耗氧速率的测量对于研究活性污泥数学模型中的动力学参数及废水特性鉴定具有重要意义。本文根据OUR测量方法的基本原理设计了1种简易的OUR测量装置,为检验测量装置的有效性,设计了相关实验进行验证。在内源呼吸实验中,测定了所用活性污泥的内源呼吸速率是5.1mgO2/L·h,污泥的衰减系数是0.0137h-1,比文献值略高。基质降解实验对人工配水(葡萄糖和淀粉)的耗氧速率进行了测定,实验结果显示有3个显著不同的耗氧速率,分别为35mg/L·h,13mg/L·h,6mg/L·h,它们各代表葡萄糖降解、淀粉降解和内源呼吸的速率。内源呼吸速率高于前1个实验是由于基质降解过程中污泥量增加所致。并计算出异养菌产率系数Kd为0.63mgVSS/mgCOD,Kd略低于文献值。实验结果证明,该装置能很好的实现测量目的。  相似文献   

利用地下水水位资料推求水文地质参数     

李巍然  姜效典 《中国海洋大学学报(自然科学版)》1993,(Z1)

依据模糊集合理论,提出了反求水文地质参数的一种新方法,即用模糊模式识别评价计算水位与观测水位的拟合程度,依模糊ISODATA聚类法的原理建立目标函数,以相应的聚类中心作为要求的水文地质参数。  相似文献   

Sources and hydrothermal alteration of organic matter in Quaternary sediments: A synthesis of studies from the Central Gulf of California     

Bernd R. T. Simoneit 《Marine and Petroleum Geology》1986,3(4)

Deep sea drilling in the Central Gulf of California, a young and active spreading centre, shows that the high heat flow typical of these regions causes extensive alteration of sediment organic matter, especially near sills and above magma chambers where hydrothermal activity is concentrated. Even on the nearby passive margin, where there are no sills, heat flow is moderately high and hydrocarbon generation has begun in immature sequences. Migrating light hydrocarbons are detected especially where hydrothermal activity is concentrated. Thermogenic methane is more widespread, though not in the passive margin bordering the spreading centre. Despite the incidence of hydrocarbon generation and migration, the amounts of hydrocarbons involved are relatively small and apparently do not lead to commercially significant accumulations of petroleum.The organic matter in these sediments is mostly marine because the Gulf of California generally has low runoff from land and highly productive surface waters. Turbidites rich in terrigenous organic material are locally abundant in the mainly pelagic section in the Guaymas Basin. The highest concentrations of organic matter are found in laminated diatomites deposited on the Guaymas passive margin within the oxygen minimum zone.  相似文献   

大型海藻孔石莼化学组分和生物活性研究新进展     

康凯  王长云  王斌贵  李国强 《海洋湖沼通报》2007,(3):155-159

孔石莼是一种大型绿藻,在食品、药物等领域具有广泛应用。本文综述了近5年来孔石莼化学组分及其生物活性研究进展,并展望了其应用前景。  相似文献   

海岸工程中海浪数值模拟和环境参数选取的进展     

黄培基 《海岸工程》1995,14(4):1-4

主要介绍了我国近的来在海岸工程设计，建设中有关海浪数值模拟及环境参数选取方面的研究进展。  相似文献   

4D seismic time-lapse monitoring of an active cold vent,northern Cascadia margin   总被引：1，自引：1，他引：1  

Michael Riedel 《Marine Geophysical Researches》2007,28(4):355-371

Two single-channel seismic (SCS) data sets collected in 2000 and 2005 were used for a four-dimensional (4D) time-lapse analysis of an active cold vent (Bullseye Vent). The data set acquired in 2000 serves as a reference in the applied processing sequence. The 4D processing sequence utilizes time- and phase-matching, gain adjustments and shaping filters to transform the 2005 data set so that it is most comparable to the conditions under which the 2000 data were acquired. The cold vent is characterized by seismic blanking, which is a result of the presence of gas hydrate in the subsurface either within coarser-grained turbidite sands or in fractures, as well as free gas trapped in these fracture systems. The area of blanking was defined using the seismic attributes instantaneous amplitude and similarity. Several areas were identified where blanking was reduced in 2005 relative to 2000. But most of the centre of Bullseye Vent and the area around it were seen to be characterized by intensified blanking in 2005. Tracing these areas of intensified blanking through the three-dimensional (3D) seismic volume defined several apparent new flow pathways that were not seen in the 2000 data, which are interpreted as newly generated fractures/faults for upward fluid migration. Intensified blanking is interpreted as a result of new formation of gas hydrate in the subsurface along new fracture pathways. Areas with reduced blanking may be zones where formerly plugged fractures that had trapped some free gas may have been opened and free gas was liberated.  相似文献   

Wave runup on a concentric twin perforated circular cylinder     

K. Vijayalakshmi  S. Neelamani  R. Sundaravadivelu  K. Murali 《Ocean Engineering》2007,34(2):327-336

The regular wave interaction with a twin concentric porous circular cylinder system consisting of an inner impermeable cylinder and an outer perforated cylinder was studied through physical model and numerical model studies. The experiments were carried out on the twin concentric cylinder model in a wave flume to study the wave runup and rundown at the leading and trailing edges of the perforated cylinder. It was found that the maximum wave runup on the perforated cylinder is almost same as the incident wave height. The experimental results were used to develop the predictive formulae for the wave runup and rundown on the perforated cylinder, which can be easily used for design applications. The wave runup profiles around the perforated cylinder for different values of ka and porosities were studied numerically using Green's Identity Method. The results of the numerical study are presented and compared with the experimental measurements.  相似文献   

Fast static correction methods for high-frequency multichannel marine seismic reflection data: A high-resolution seismic study of channel-levee systems on the Bengal Fan     

Martin Gutowski  Monika Breitzke  Volkhard Spieß 《Marine Geophysical Researches》2002,23(1):57-75

Very high-frequency marine multichannel seismic reflection data generated by small-volume air- or waterguns allow detailed, high-resolution studies of sedimentary structures of the order of one to few metres wavelength. The high-frequency content, however, requires (1) a very exact knowledge of the source and receiver positions, and (2) the development of data processing methods which take this exact geometry into account. Static corrections are crucial for the quality of very high-frequency stacked data because static shifts caused by variations of the source and streamer depths are of the order of half to one dominant wavelength, so that they can lead to destructive interference during stacking of CDP sorted traces. As common surface-consistent residual static correction methods developed for land seismic data require fixed shot and receiver locations two simple and fast techniques have been developed for marine seismic data with moving sources and receivers to correct such static shifts. The first method – called CDP static correction method – is based on a simultaneous recording of Parasound sediment echosounder and multichannel seismic reflection data. It compares the depth information derived from the first arrivals of both data sets to calculate static correction time shifts for each seismic channel relative to the Parasound water depths. The second method – called average static correction method – utilises the fact that the streamer depth is mainly controlled by bird units, which keep the streamer in a predefined depth at certain increments but do not prevent the streamer from being slightly buoyant in-between. In case of calm weather conditions these streamer bendings mainly contribute to the overall static time shifts, whereas depth variations of the source are negligible. Hence, mean static correction time shifts are calculated for each channel by averaging the depth values determined at each geophone group position for several subsequent shots. Application of both methods to data of a high-resolution seismic survey of channel-levee systems on the Bengal Fan shows that the quality of the stacked section can be improved significantly compared to stacking results achieved without preceding static corrections. The optimised records show sedimentary features in great detail, that are not visible without static corrections. Limitations only result from the sea floor topography. The CDP static correction method generally provides more coherent reflections than the average static correction method but can only be applied in areas with rather flat sea floor, where no diffraction hyperbolae occur. In contrast, the average static correction method can also be used in regions with rough morphology, but the coherency of reflections is slightly reduced compared to the results of the CDP static correction method.  相似文献