粗大误差在船坞围堰安全施工监测中的运用与分析     

周元  彭满华  安小锐 《岩土工程技术》2012,(5):226-229,255

船坞监测数据对船坞围堰的正常施工起着非常重要的作用,但是由于各种不正确的因素导致监测数据与实际情况不符,而这些异常测值不能通过直观的方法进行剔除,从而对船坞围堰的安全施工监控产生较大的影响,必须进行判断和处理。分别介绍了3σ（拉伊达）、Grubbs（格罗布斯）、Dixon（狄克逊）3种常用排除粗大误差的准则,并应用于具体的船坞围堰安全施工监测。结果表明,这些准则能快速、方便、有效地排除异常测值,为船坞围堰安全施工提供帮助。  相似文献   

中国对钢铁资源的长期需求预测     

王礼 《地质与勘探》2012,48(6):1129-1133

钢铁工业是我国的支柱产业,对国内钢铁的长期需求进行科学预测,可以为我国经济发展的战略发展进行科学决策提供重要依据。由于我国铁矿资源不能满足国民经济发展需求,对钢铁需求的预测,不仅对我国钢铁工业布局和全球产业链配置具有重要参考价值,更对我国企业海外矿山投资具有重要指导意义。本文通过模型组合预测了"十二五"期间我国对钢的需求及其供需平衡,抛砖以引业内外人士高水平长期预测之玉。  相似文献   

装配式内藏钢桁架混凝土剪力墙抗震性能试验研究     

汪梦甫  武文博  刘泽龙  郭圣祈 《地震工程与工程振动》2022,42(1):11-24

为了提高装配式剪力墙的抗震性能,提出并设计了一片暗柱内置H型钢装配式内藏钢桁架混凝土剪力墙及一片暗柱内置圆钢管装配式内藏钢桁架混凝土剪力墙,其中H型钢竖向连接采用顶底角钢复合连接,圆钢管竖向连接采用端板焊接.通过对试件进行低周反复加载试验,得到剪力墙试件的破坏模式、滞回曲线、承载力、延性、残余变形、刚度退化和耗能能力等...  相似文献   

Development of a new rubber seismic isolator: ‘Ball Rubber Bearing (BRB)’     

C. Ozkaya  U. Akyuz  A. Caner  M. Dicleli  S. Pınarbası 《地震工程与结构动力学》2011,40(12):1337-1352

This paper presents an experimental research aimed at developing a new rubber‐based seismic isolator called ‘Ball Rubber Bearing (BRB)’. The BRB is composed of a conventional steel‐reinforced multi‐layered rubber bearing with its central hole filled with small diameter steel balls that are used to provide energy dissipation capacity through friction. A large set of BRBs with different geometrical and material properties are manufactured and tested under reversed cyclic horizontal loading at different vertical compressive load levels. Extensive test results indicate that steel balls do not only increase the energy dissipation capacity of the elastomeric bearing (EB), but also increase its horizontal and vertical stiffness. It is also observed that the energy dissipation capacity of a BRB does not degrade as the number of loading cycles increases. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

钢管混凝土叠合柱边框内藏钢桁架核心筒抗震性能试验研究   总被引：1，自引：1，他引：0  

董宏英  杨信强  曹万林  张建伟  耿海霞 《地震工程与工程振动》2011,31(1)

为进一步改善混凝土核心简的抗震性能,本文提出了钢管混凝土叠合柱边框内藏钢桁架组合核心筒.进行了2个1/6缩尺的核心筒模型在低周反复荷载下的抗震性能试验研究,1个为钢管混凝土叠合柱边框毛组合核心筒,1个为钢管混凝土叠合柱边框内藏钢桁架组合核心筒.通过试验,对比分析了2个核心简的承载力、延性、刚度及其衰减、滞回特性、耗能能力及破坏特征,给出了钢管混凝土叠合柱边框内藏钢桁架组合核心筒的承载力计算模型,计算结果与实测值符合较好.研究表明,钢管混凝土叠合柱边框内藏钢桁架组合核心筒与钢管混凝土叠合柱边框组合核心筒相比,其抗震性能明显提高.  相似文献   

半刚接框架-斜加劲钢板剪力墙低周反复荷载试验研究     

郭宏超  郝际平  李峰 《地震工程与工程振动》2011,31(1):54-60

对一榀单跨两层半刚接框架-斜加劲钢板剪力墙结构进行了低周反复荷载试验,分析结构破坏模式和耗能机理,得到了承载力、延性、刚度、耗能能力等指标.结果表明:该种结构具有良好的延性和耗能性能,安全储备高;半刚框架和墙板协同工作良好;斜加劲肋的设置缓解了钢板沿拉力带方向的面外变形,提高了墙体的弹性屈曲倚载及初始刚度,减轻了滞回曲...  相似文献   

大跨径钢管混凝土拱桥减震控制装置参数的研究   总被引：1，自引：0，他引：1  

周锐  王浩  宗周红  陈政清 《地震学刊》2011,(5):535-541

大跨度桥梁结构的减震控制研究对于桥梁结构的抗震安全具有重要意义。本文以主跨368m的茅草街大桥为研究对象,基于ANSYS建立了该桥的三维有限元模型,并采用子空间迭代法分析了该桥的动力特性。在此基础上进行了大跨度钢管混凝土拱桥的地震响应及减震控制研究,重点进行了弹性连接装置和粘滞阻尼器减震效果的参数敏感性分析,并对比分析了不同位置布设减震装置时的效果。结果表明,纵飘振型对该桥肋纵向相对位移的贡献最大;弹性连接装置和阻尼器均能有效减小地震作用下该桥的肋梁纵向相对位移;综合考虑各关键部位的地震响应时,同时采用两类减震装置并将其分散布置时的减震效果最佳。结论可供大跨度中承式钢管混凝土系杆拱桥的抗震设计参考。  相似文献   

Numerical simulation of the seismic behavior of self-centering steel beam-column connections with bottom flange friction devices     

Tong Guo  Lianglong Song  Guodong Zhang 《地震工程与工程振动(英文版)》2011,10(2):229-238

A new type of steel moment resisting frame with bottom ? ange friction devices (BFFDs) has been developed to provide self-centering capacity and energy dissipation, and to reduce permanent deformations under earthquakes. This paper presents a numerical simulation of self-centering beam-column connections with BFFDs, in which the gap opening /closing at the beam-column interfaces is simulated by using pairs of zero-length elements with compression-only material properties, and the energy dissipation due to f...  相似文献   

Research on seismic performance of shear walls with concrete filled steel tube columns and concealed steel trusses   总被引：1，自引：1，他引：0  

Wanlin Cao  Jianwei Zhang  Hongying Dong  Min Wang 《地震工程与工程振动(英文版)》2011,10(4):535-546

In order to further improve the seismic performance of RC shear walls, a new composite shear wall with concrete filled steel tube (CFT) columns and concealed steel trusses is proposed. This new shear wall is a double composite shear wall; the first composite being the use of three different force systems, CFT, steel truss and shear wall, and the second the use of two different materials, steel and concrete. Three 1/5 scaled experimental specimens: a traditional RC shear wall, a shear wall with CFT columns, and a shear wall with CFT columns and concealed steel trusses, were tested under cyclic loading and the seismic performance indices of the shear walls were comparatively analyzed. Based on the data from these experiments, a thorough elastic-plastic finite element analysis and parametric analysis of the new shear walls were carried out using ABAQUS software. The finite element results of deformation, stress distribution, and the evolution of cracks in each phase were compared with the experimental results and showed good agreement. A mechanical model was also established for calculating the load-carrying capacity of the new composite shear walls. The results show that this new type of shear wall has improved seismic performance over the other two types of shear walls tested.  相似文献   

钢质大型浮顶油罐防雷设计与施工工艺研究     

丁立兵  康强 《气象研究与应用》2011,32(1):84-87

通过对钢质浮顶油罐雷电防护技术和施工工艺的研究,分析了钢质大型浮顶油罐的防雷技术措施;针对相关国家规范只有条文规定而无相应施工图集的问题,给出了相应的防雷施工工艺图,以供油库防雷设计和施工管理人员参考.  相似文献