Failure Pressure Analysis of Corroded Moderate-to-High Strength Pipelines     

苏晨亮  李昕  周晶 《海洋工程》2016,(1):69-82

Based on the elastic-plastic, large-deformation finite element method, burst capacity of steel pipeline with longitudinal corrosion defect subjected to internal pressure is studied. The appropriate stress-based criterion is used to predict the failure pressure of finite element model of corroded pipeline under internal pressure. By considering the pipe steel grades and geometries of corrosion defects, a series of finite element analyses is conducted. The effects of corrosion depth, length and width on burst capacity are also discussed. A specific failure pressure solution for the assessment of corrosion defects in moderate-to-high strength pipeline is proposed on the base of numerical results. The failure pressures predicted by the proposed method are in better agreement with the experimental results than the results by the other methods.  相似文献   

腐蚀管道在内压和轴向压力影响下的弯曲破坏     

高杰  李昕  周晶 《海洋工程》2016,34(6):74-82

运行在恶劣环境中的海底管道,往往受到内压、轴力和弯矩等复杂荷载的联合作用。腐蚀会导致管壁局部变薄,降低管道极限承载力。为保证管道安全高效运行,准确预测和分析复杂荷载作用下的塑性极限承载力和变形行为就显得尤为重要。考虑大应变和大变形、应力强化和材料非线性,运用数值仿真软件建立腐蚀缺陷管道的三维实体有限元模型,在全尺寸管道破坏试验验证的基础上,对腐蚀管道在内压、轴向压力和弯矩相互作用下的失效模式和极限弯矩承载力进行了相关研究,并进行了腐蚀缺陷几何参数的敏感性分析。研究结果表明:初始内压和初始轴向压力会显著降低腐蚀管道的极限弯矩承载力,并且影响最终的失效模式;在腐蚀缺陷几何尺寸参数中,腐蚀宽度比腐蚀深度和腐蚀长度的影响更大。  相似文献   

坑式钢管静压桩在地基加固中的应用     

周军怀  李向阳  柴卓 《探矿工程》2018,45(11):56-59

坑式钢管静压桩是解决既有建筑物因软弱土层地基产生沉降变形的一种技术方法。针对山西北化关铝化工有限公司质检楼地基沉降变形及工程地质条件,提出了采用坑式钢管静压桩进行加固处理的设计方案,介绍了坑式钢管静压桩施工方案和施工流程及注意事项;总结了施工过程中遇到的问题,并对施工后的监测数据进行了分析。结果表明,坑式钢管静压桩施工对软弱地基加固效果良好,可成功地解决软弱土层产生的地基沉降开裂问题。  相似文献   

护坡桩+微型钢管桩复合土钉墙联合支护体系研究应用          下载免费PDF全文

孙剑  范民浩  李鑫 《探矿工程》2021,48(10):116-124

本文提出了一种新的联合支护体系——护坡桩+微型钢管桩复合土钉墙支护体系,成功解决了基坑周边无放坡空间需垂直开挖、基坑深度大、要求位移小、支护费用高等技术难题,做到了施工便利,对控制边坡位移变形、增强边坡整体稳定性、保证在基坑开挖工程中不发生对周围环境的影响具有良好的作用。采用这种支护方式对北京一工程进行设计施工探讨,经工后监测效果良好,大大地提高了边坡的安全稳定性,从而验证了这一支护形式的可行性,其在深基坑支护中具有常规土钉墙和护坡桩无法相比的技术与经济优势,可供其他类似工程参考,具有较高的适用推广价值。  相似文献   

进口爆破孔钻机配套钻塔的研制          下载免费PDF全文

张西坤  宋秋锋  申寿长  刘大仲  浦静怡  曹继玉  魏少军 《探矿工程》2021,48(6):80-86

进口DMH90型爆破孔钻机配套钻塔整体性强,起落塔快捷方便,钻塔高度满足不换杆一次成孔,即钻塔有效高度略大于钻孔深度,承受振动冲击力大,施工工作环境恶劣。基于这些特点和难点,爆破塔长期依赖进口,导致成本增高、周期加长,为此进行了进口DMH90型爆破孔钻机配套钻塔的替代进口研究工作。本文介绍了DMH90型爆破孔钻机配套ZT27-45型爆破孔钻塔的研制过程,主要对ZT27-45型爆破孔钻塔的设计要点、结构型式、塔体选材、焊接工艺、防止变形、消除应力、质量检验等方面进行了探索、试验和总结。生产施工实践表明,ZT27-45型钻塔制造质量达到了设计要求,满足爆破孔施工的需要,实现了替代进口,达到了降低成本、缩短工期和提高机械性能的目的。  相似文献   

AN ANALYSIS OF THE SEISMIC CHARACTERISTICS OF STEEL-JACKETED CIRCULAR BRIDGE COLUMNS     

Y. H. CHAI 《地震工程与结构动力学》1996,25(2):149-161

The current approach for seismic retrofit of deficient bridge columns in California involves extensive use of steel jacketing. In this paper, the influence of steel jacketing on the lateral response of circular bridge columns is studied; particularly, the enhancement of the ultimate compressive strain of concrete, the increase in curvature ductility capacity and the increase in lateral stiffness are investigated. The current steel jacket thickness used in California is shown to enhance the ultimate compressive strain of concrete by 4–9 times the spalling strain of unconfined concrete. For larger steel jacket thickness, the ultimate limit state of steel-jacketed columns may be governed by the low-cycle fatigue fracture of the longitudinal reinforcement instead of the ultimate compressive strain of concrete. Steel jacketing is also expected to increase significantly the lateral stiffness of columns if full-height steel jackets are used. The increase in lateral stiffness of flexural columns (3⩽L/D⩽9) is estimated to be 35–60 per cent using current jacket thickness. Inelastic dynamic analyses of steel-jacketed columns using ground motions recorded during the 1989 Loma Prieta earthquake indicated that the current steel jacket thickness provides adequate protection against the damage potential of the ground motions with comparable spectral acceleration as that specified in current design spectra, and the damage sustained by the steel-jacketed column is likely to be repairable.  相似文献   

SEISMIC IMPACT LOADING IN INELASTIC TENSION-ONLY CONCENTRICALLY BRACED STEEL FRAMES: MYTH OR REALITY?     

R. TREMBLAY  A. FILIATRAULT 《地震工程与结构动力学》1996,25(12):1373-1389

Tension-Only Concentrically Braced Frames (TOCBF) exhibit deteriorating pinched hysteretic behaviour during strong earthquakes. Slender braces transit between an elastic buckling state, a restraightening state, in which they carry almost no load, an elastic tensile loading state as they are suddenly taut and, finally, a tensile yielding state. It has long been suspected that the sudden increase in tensile forces in the braces of TOCBSF creates detrimental impact loading on the connections and other structural elements. No experimental evidence, however, has been provided so far to confirm, or to quantify, this impact phenomenon. This paper addresses this issue through shake table tests of half scale, two-storey, TOCBF models. By normalizing the hysteresis loops of braces obtained from shake table tests to the yield strength of steel obtained from quasi-static tests, the increase in tensile forces in the braces was obtained. Results of dynamic tensile tests on steel coupons under similar strain rates as observed during the shake table tests showed that this increase in tensile forces is not the result of impact, but is rather caused by a yield strength increase of the steel under high strain rate. A procedure is proposed to estimate and account for this increase in tensile forces in the braces at the design stage.  相似文献   

钢筋混凝土扁梁柱节点抗震设计方法   总被引：1，自引：0，他引：1  

戴益华 《地震工程与工程振动》2006,26(1):122-128

为考虑扁梁柱节点内、外核心区的相互作用,对扁梁柱节点的内、外核心区进行了重新划分,认为内、外核心区有一个重叠的区域,给出了地震作用在扁梁柱节点内外核心区的分配方法,采用压杆模型和软化桁架模型,提出扁梁柱节点的设计方法。该方法可以考虑节点核心区钢纤维和扁梁中无粘结预应力对扁梁柱节点抗剪极限承载力的作用。该设计方法的可靠性得到四个钢筋混凝土扁梁柱节点试验数据的验证。  相似文献   

型钢混凝土梁柱框支剪力墙结构抗震性能试验研究   总被引：3，自引：0，他引：3  

李国强  崔大光  李一松 《地震工程与工程振动》2006,26(2):80-87

框支剪力墙结构在实际工程中经常被采用,震害表明钢筋混凝土框支剪力墙结构抗震性能较差,本文提出型钢混凝土梁柱框支剪力墙结构对此加以改进。作者进行了4个1/4缩尺模型在竖向荷载和单调及低周反复水平荷载作用下的对比试验,其中3个试件采用型钢混凝土转换梁、型钢混凝土框支柱,1个试件采用钢筋混凝土转换梁、钢筋混凝土框支柱。我们分析其承载力、刚度、变形、延性和破坏形态等。试验结果表明,型钢混凝土梁柱框支剪力墙结构承载力高、延性好、滞回曲线丰满,变形能力和耗能能力较强。  相似文献   

钢框架-混凝土抗侧力结构的抗震性能研究   总被引：1，自引：1，他引：0  

魏德敏  武奇华 《地震工程与工程振动》2006,26(3):115-117

在双重抗侧力结构体系中,地震作用主要由支撑框架或剪力墙等抗侧力结构承受,框架则主要承受竖向荷载,但是对框架的水平抗力也有具体要求。我国规范和美国规范对钢框架-剪力墙结构中框架应该承担的剪力有不同的规定,并且给出相应的抗震校核方法。此外,人们需要了解在混合结构中减少柱的数量对结构抗震性能的影响。为此,本文进行了2种钢-混凝土混合结构地震响应的有限元分析,并且考虑了柱距的变化,得到了轴压比的变化规律,对由两国抗震校核方法的计算结果进行了对比,提出了相关的设计建议。  相似文献