建筑结构中抗震分析模型的优化研究          下载免费PDF全文

沈毅  郭阳照 《地震工程学报》2018,40(3):490-496

大多数建筑结构由梁、柱、支撑、剪力墙、地基和楼板等主要结构组成。一般而言,楼板对建筑结构的抗震性能可以忽略不计,所以进行建筑结构分析的模型是无楼板的。因此,楼板被刚性隔板代替,以提高分析效率。本文提出的建筑结构抗震分析解析模型考虑了楼板抗弯刚度,该模型采用超级单元、刚性隔板和子结构技术来减少自由度。通过实例分析,验证了该模型在多层建筑结构抗震分析中的有效性和准确性。且此模型能够显著减少计算量,提高分析效率,振动周期和响应时间等分析结果的精度与精化模型的结果非常接近,说明该模型的提出是合理的。  相似文献   

基于重力数据特征的东北地区深部动力机制解析          下载免费PDF全文

马国庆  孟庆发  王泰涵 《地球物理学报》2019,62(3):1083-1092

中国东北地区处于古亚洲构造域、蒙古—鄂霍茨克构造域和环太平洋构造域叠加作用最为显著的地区,是地学研究的热点区域.为了探析欧亚大陆下西太平洋板片的俯冲形态以及揭示该区域深部地球动力学机制,利用卫星重力数据通过预处理共轭梯度快速密度反演算法获得了包含东北地区、华北部分地区及日本海海域在内的研究区域上地幔三维密度结构,结合天然地震三维层析成像结果共同揭示太平洋板片的俯冲形态和深部动力机制.俯冲的太平洋板片在日本海沟处呈高密度异常,向西横向持续扩张,深度方向上有逐渐增加趋势.不连续的高密度体俯冲至地幔转换带(410～660km)后继续水平西向俯冲,部分滞留板片可能进入下地幔;在大兴安岭断裂带下面转换带中同样发现水平分布的高密度体,推断是大兴安岭断裂带下方地幔岩石圈拆沉的结果,横向不均匀分布的俯冲板片边缘已抵至大兴安岭造山带附近,这对于研究东北地区深部动力学机制具有重要的意义.  相似文献   

华北北部地区地壳三维P波速度结构的双差地震层析成像     

杨峰 《地震》2019,39(1):58-71

利用区域固定台站和华北科学探测台阵记录的10 461个近震事件的183 909个Pg波绝对走时和495 753个相对走时数据,采用双差地震层析成像获得华北北部(37.5°～41.5°N,111.5°～119.5°E)范围内的地壳三维P波速度结构模型。结果表明:研究区内各主要构造单元具有明显不同的速度结构特征,速度异常的走向与区域构造的走向一致,浅层速度图像很好地反映了地表地质和岩性的变化;重定位后的大部分地震集中在0～20km的深度上,主要位于低速区的内部或高速和低速区的交界部位;三河—平谷和唐山地震震源区中、下地壳的低速异常可能是流体的显示。结合前人成果和本文模型所揭示的深、浅结构,我们认为太平洋板块在中国东部之下的俯冲和滞留引起板块脱水、软流圈物质上涌等一系列过程,软流圈热物质到达上地幔顶部并沿超壳断裂上侵进入地壳,致使上地幔顶部和下地壳中的含水矿物发生脱水作用产生流体,流体继续上移造成中、上地壳发震层的弱化,从而导致大地震的发生。因此华北北部地区的强震活动,以及地壳结构的非均匀性应是与太平洋板块俯冲、滞留引起的深部过程密切相关的。  相似文献   

精确测量的地幔体波走时及地幔非均匀性的强度   总被引：7，自引：2，他引：5  

赵大鹏  Akira YAMADA  Yuhei OHTA 《地学前缘》2006,13(2):37-47

用波形相关法精确地测定了在世界各地发生的87个6级以上地震的P波, PP波和Pdiff波的503个走时数据。记录这些地震波形的是新建于西太平洋地区的海洋半球地震观测网。我们利用这些高精度的走时数据研究了地幔体波的走时残差的范围及地幔非均匀性的强度。结果表明,P波、PP波和Pdiff波的走时残差最大分别为9 s ,11 s和15 s ,这为地幔层析成像反演中应该使用的体波走时残差数据的范围提供了重要信息。超出这一范围的走时残差数据不应该用于反演中,以免歪曲成像结果。我们发现,当震中距小于40°时,P波走时残差的范围为-6到+9 s。而对于40°到99°之间的震中距,P波走时残差的范围为-3到+5s。由于震中距越大,P波穿透地幔越深,我们这一结果提供了直接和确凿的证据,表明上地幔和地幔转换带中的横向非均匀性的强度要远胜于下地幔。我们精确测量的Pdiff波的走时数据表明,在地幔底部存在显著的低速异常,可能与地幔热柱或者超级地幔柱有关。我们使用了一个最新的三维全球层析成像模型来解释这些体波走时数据的空间变化。  相似文献   

Physical conditions producing slab stagnation: Constraints of the Clapeyron slope, mantle viscosity, trench retreat, and dip angles   总被引：1，自引：0，他引：1  

Yoku Torii  Shoichi Yoshioka 《Tectonophysics》2007,445(3-4):200-209

Recent seismic tomography has revealed various morphologies in the subducted lithosphere. In particular, significant flattening and stagnation of slabs around the 660-km boundary are seen in some areas beneath the northwestern Pacific subduction zones. We examined the cause of slab stagnation in terms of the Clapeyron slope of the phase transformation from ringwoodite to perovskite + magnesiowüstite, trench retreat velocity, dip angles, and high viscosity of the lower mantle based on two-dimensional (2-D) numerical simulations of thermal convection. In particular, we examined the conditions necessary for slab stagnation assuming a very small absolute value of the Clapeyron slope, which were proposed based on recent high-pressure, high-temperature (high P–T) experiments. Our calculations show that slabs tend to stagnate above the 660-km boundary with an increasing absolute value of the Clapeyron slope, viscosity jump at the boundary, and trench retreat velocity and a decreasing initial dip angle. Stagnant slabs could be obtained numerically for a realistic range of parameters obtained from high P–T experiments and other geophysical observations combining buoyancy, high lower-mantle viscosity, and trench retreat. We found that a low dip angle of a descending slab at the bottom of the upper mantle plays an important role in slab stagnation. Two main regimes underlie slab stagnation: buoyancy-dominated and viscosity-dominated regimes. In the viscosity-dominated regime, it is possible for slabs to stagnate above the 660-km boundary, even when the value of the Clapeyron slope is 0 MPa/K.  相似文献   

Niobium-tantalum Fractionation During Slab Subduction:Implications for the Formation of Continental Crust     

Yilin Xiao  Weidong Sun  Jochen Hoefs  Klaus Simon  Zeming Zhang  Shuguang Li 《矿物岩石地球化学通报》2007,26(Z1)

Compared with the oceanic crust, knowledge about the formation of the continental crust (CC) is relatively poor. Although melting of subducted slabs in the early history of the Earth has been considered as the major way that shaped the chemical characteristics of the CC by most geologists, as the CC shares many characteristics with modern adakites, some geologists argued that Archean TTG was formed in the same way as modern arcs rather than slab melting, whereas others proposed that melting at the bottom of the thickened oceanic crust was more important. Recently,the debate is mainly focused on the unique subchondritic Nb/Ta value of the CC, and particularly, how Nb and Ta fractionated from each other and consequently how, in detail, the CC was built.  相似文献   

新疆西天山那拉提构造带变质核部杂岩地质构造特征     

高鹏  王宏运  倪新元  李兵  胡志军  王耀武 《陕西地质》2005,23(2):61-69

新疆西天山那拉提构造带变质核部杂岩分布于新疆巩留县那拉提山山脊北侧，整体沿那位提南缘构造带北侧呈近东西向展布，为一套由高级变质表壳岩、灰色片麻岩组成的早前寒武系高级片麻岩系，历经多期不同构造体制变形变质改造与再造，形成多相片麻岩系，并呈长垣状变质核部杂岩隆升，构成那拉提造山带的核部构造物质组成。  相似文献   

疆东天山觉洛塔格地区梧桐窝子岩组构造环境探讨   总被引：7，自引：0，他引：7  

贺军慧夏明  张兴龙 《新疆地质》2005,23(1):23-27

梧桐窝子岩组为晚石炭世海底扩张喷发形成的一套中基性火山岩-细碧岩．硅质岩-碳酸盐岩建造．通过对剖面组合特征研究，认为该岩组是由辉长岩-辉绿岩-玄武岩．放射虫硅质岩组成的洋壳残片和岛弧物质的安山岩、凝灰岩、沉凝灰岩及弧前沉积的凝灰质砂岩、钙质砂岩、微晶大理岩、正常碎屑岩(糜棱岩、千糜岩)3部分组成的蛇绿混杂岩带．三所处构造背景、沉积环境不同，在岩石学、岩石化学及岩石地球化学特征上亦有较大差异．  相似文献   

荣成地区特别富^18O的榴辉岩的成因     

储雪蕾  郭敬辉  范宏瑞  金成伟 《岩石学报》2005,21(3):839-845

荣成地区的M类榴辉岩特别富集18O,这样富18O的榴辉岩在大别山-苏鲁超高压变质带还尚未见报导。异常高的δ18O值表明M类榴辉岩与围岩-大理岩在变质过程中发生过强烈的氧同位素交换。稳定同位素、流体包裹体等证据揭示氧同位素交换可能发生在超高压岩石的折返过程中,由于叠加的麻粒岩相退变质作用使同俯冲的新元古代海相碳酸盐岩发生了去碳酸盐化作用,产生了富CO2的变质流体。这种退变质流体特别富18O,成为M类榴辉岩与围岩碳酸盐岩交换的媒介。所观测到的M类榴辉岩内矿物之间,以及榴辉岩与围岩大理岩之间都基本达到了高温下的氧同位素平衡。由于荣成地区各类榴辉岩记录的变质温度普遍高于大别山和苏鲁南段的榴辉岩,因此这一地区的榴辉岩在折返过程中一般都叠加有麻粒岩相和／或角闪岩相的退变质作用。退变质流体,特别是麻粒岩相退变质期间产生的富CO2流体,是造成这一地区M类榴辉岩有别于其它地区M类榴辉岩-特别富18O的根源。  相似文献   

Slab pull effects from a flexural analysis of the Tonga and Kermadec trenches (Pacific Plate)   总被引：1，自引：0，他引：1  

Daniel Garcia-Castellanos  Montserrat Torne  & Manel Fernàndez 《Geophysical Journal International》2000,141(2):479-484

Thin-plate flexure models have been frequently used to explain the mechanical behaviour of the lithosphere at oceanic trenches, but little attention has been paid to using them as a way to check the relative importance of different plate-driving mechanisms. A 2-D numerical algorithm accounting for the flexural deflection of the lithosphere controlled by multilayered elastic–plastic rheology (brittle–elastic–ductile) has been applied to the seaward side of the Tonga and Kermadec trenches. This approach gives a better fit to the bathymetry on both trenches than assuming classical homogeneous plate models, and allows the interplate coupling forces and the lithospheric strength profile to be constrained. Our results show that, in order to fit the observed deflection of the lithosphere, a regional tensile horizontal force must act in both regions. This tensile force and its flexural effects are discussed in terms of slab pull as a main plate-driving mechanism. The predicted stress and yielding distributions partially match the outer-rise earthquake hypocentres within the subducting plate, and thus do not invalidate the model.  相似文献