Estimation of fundamental periods of shear‐wall dominant building structures     

Can Balkaya  Erol Kalkan 《地震工程与结构动力学》2003,32(7):985-998

Shear‐wall dominant multistorey reinforced concrete structures, constructed by using a special tunnel form technique are commonly built in countries facing a substantial seismic risk, such as Chile, Japan, Italy and Turkey. In spite of their high resistance to earthquake excitations, current seismic code provisions including the Uniform Building Code (International Conference of Building Officials, Whittier, CA, 1997) and the Turkish Seismic Code (Specification for Structures to be Built in Disaster Areas, Ankara, Turkey, 1998) present limited information for their design criteria. In this study, consistency of equations in those seismic codes related to their dynamic properties are investigated and it is observed that the given empirical equations for prediction of fundamental periods of this specific type of structures yield inaccurate results. For that reason, a total of 80 different building configurations were analysed by using three‐dimensional finite‐element modelling and a set of new empirical equations was proposed. The results of the analyses demonstrate that given formulas including new parameters provide accurate predictions for the broad range of different architectural configurations, roof heights and shear‐wall distributions, and may be used as an efficient tool for the implicit design of these structures. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Inelastic displacement ratios for evaluation of existing structures     

Jorge Ruiz‐García  Eduardo Miranda 《地震工程与结构动力学》2003,32(8):1237-1258

Results of a detailed statistical study of constant relative strength inelastic displacement ratios to estimate maximum lateral inelastic displacement demands on existing structures from maximum lateral elastic displacement demands are presented. These ratios were computed for single‐degree‐of‐freedom systems with different levels of lateral strength normalized to the strength required to remain elastic when subjected to a relatively large ensemble of recorded earthquake ground motions. Three groups of soil conditions with shear wave velocities higher than 180m/s are considered. The influence of period of vibration, level of lateral yielding strength, site conditions, earthquake magnitude, distance to the source, and strain‐hardening ratio are evaluated and discussed. Mean inelastic displacement ratios and those associated with various percentiles are presented. A special emphasis is given to the dispersion of these ratios. It is concluded that distance to the source has a negligible influence on constant relative strength inelastic displacement ratios. However, for periods smaller than 1s earthquake magnitude and soil conditions have a moderate influence on these ratios. Strain hardening decreases maximum inelastic displacement at a fairly constant rate depending on the level of relative strength for periods of vibration longer than about 1.0s while it decreases maximum inelastic displacement non‐linearly as the period of vibration shortens and as the relative‐strength ratio increases for periods of vibration shorter than 1.0s. Finally, results from non‐linear regression analyses are presented that provide a simplified expression to be used to approximate mean inelastic displacement ratios during the evaluation of existing structures built on firm sites. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Seismic response predictions of multi‐span steel bridges through pushover analysis     

Yi Zheng  Tsutomu Usami  Hanbin Ge 《地震工程与结构动力学》2003,32(8):1259-1274

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

非开挖导向钻进实际轨迹的控制设计   总被引：4，自引：0，他引：4  

张德龙  蒋荣庆 《吉林大学学报(地球科学版)》2003,33(2):246-248

非开挖导向钻进技术，具有施工速度快、适用范围广等优点，得到了广泛的应用。在实际钻进中，由于钻进在地下的不确定性，影响了导向钻进的顺利进行。到得钻进中当前点的顶角、方位角和孔深，通过均角全距法原理，可以近似地描绘出当前钻孔的空间实际轨迹，并确定钻头的位置。应用这一原理，同时运用VisualBasic语言和AutoCAD绘图工具相结合的方法，编制一套应用程序，可以直接绘制出当前钻孔轨迹，并可实现对钻孔轨迹的调控，从而保证导向钻进的顺利进行。  相似文献   

平面散点集Delaunay三角剖分的一种高效方法   总被引：12，自引：3，他引：12  

周杰  丁贤荣  汪德爟 《测绘信息与工程》2003,28(6):21-23

以平面散点集逐点插入的Delaunay三角化的方法为基础，在三角化过程中采用一定策略，将其改进成为一种简单易行而高效的方法，能够适应包括多岛、多连通域等复杂情况的各种边界，能够生成贴体的三角网，网格能够保证符合Delaunay法则。  相似文献   

Digital model of corrected accumulated flow for peak discharge data acquisition and drainage system design     

F. J. Fern  ndez  R. Men  ndez-Duarte  R. Vald  s-Riera 《Engineering Geology》2003,69(3-4):345-358

The design of a drainage system for a roofing slate quarry was implemented by the enhancement of discharge peak estimation, and the uncertainty inevitably associated with the engineering model was reduced.

The development of a topographical, geological, and vegetation cover database developed from a Geographical Information System (GIS) allowed for the definition of the drainage network for a hydraulic system, along with the calculation of the runoff coefficient. This is applied to the digital model of accumulated flow (DMF) as a weight correction coefficient, using a matrix-based model at 5×5 m resolution. The new digital model of corrected accumulated flow (DMCF) is the result of combining the thematic maps with the map of slope <3%, which was previously created from the slope model. It is demonstrated that this new model allows to apply the “Rational Method” on cartographic units defined by the GIS.

The DMCF is compared with other traditional applications of the Rational Method based on the calculation of the discharge peak considering: (1) the drainage basin as a single watershed or (2) defining an average runoff coefficient in each sub-watershed. Both approaches have bigger discharge peaks than those obtained by the DMCF since the slope, lithology, and vegetation cover have average values, and the runoff coefficient is poorly defined, increasing the uncertainty in the discharge peak.  相似文献   

小湾电站高边坡系统锚固与排水的优化设计方法   总被引：1，自引：0，他引：1  

张发明  陈祖煜  汪小刚  贾志欣 《岩土力学》2003,(Z2)

据小湾电站地下厂房进水口开挖高边坡的岩体结构与工程地质特征,采用基于结构面网络模拟的随机楔体稳定分析方法对边坡的稳定性进行了三维分析。进一步运用风险分析理论对边坡系统锚杆与预应力锚索的布置进行了优化设计,最后运用结构面网络模拟理论对排水方案进行了优化设计。  相似文献   

土钉支护结构的优化设计   总被引：1，自引：1，他引：1  

邓建刚  傅旭东 《岩土力学》2003,(Z2)

根据复形优化原理,提出了基于Bishop法的土钉支护结构的优化分析方法,编写了优化分析程序。工程实例计算表明,该方法是进行土钉优化设计的有效方法。  相似文献   

控制网优化设计中的蒙特卡罗法     

朱江  包欢 《测绘学院学报》2003,20(3):174-176

介绍了蒙特卡罗法的基本步骤以及伪随机数的检验方法；结合工程控制网的设计给出了一个实际算例，算例的结果表明该方法切实有效。  相似文献   

最不利设计地震动研究   总被引：39，自引：1，他引：39       下载免费PDF全文

谢礼立  翟长海 《地震学报》2003,25(3):250-261

实际记录到的真实地震动在工程结构的抗震研究、分析和设计中往往作为一种施加到结构上使结构振动，直至破坏的地震荷载．如何合理选择真实的地震动记录作为研究结构地震反应的输入，一直是国内外抗震研究和设计中引人关注的重要问题．本文首先提出了最不利设计地震动的概念；然后在收集到的国内外5000余条被认为有重要意义的地震动记录基础上，利用综合估计地震动潜在破坏势的方法，对４种场地类型分别给出了长周期、短周期和中周期结构的国内外最不利设计地震动；最后通过几类不同结构的地震反应分析，初步验证了本文所确定的最不利设计地震动的可靠性和合理性．   相似文献