近50 a渭河流域洪水成因分析及防治对策   总被引：6，自引：1，他引：6  

张琼华  赵景波 《中国沙漠》2006,26(1):117-121

 通过对近50 a渭河流域洪水的年际变化、月际变化和潼关高程变化的综合分析得出，造成该流域洪水灾害的原因有降水量年内分配不均和年际变化大，滩面淤积加重，支流河口淤塞以及河势、流态的恶化等。针对这些原因，根据渭河流域洪水灾害的特点，提出了相应的防治措施，即降低下游高程，减少河道的淤积，增大河道泄洪能力；利用水库进行调水调沙，引进客水冲刷渭河下游；防洪工程要除险加固，提高防洪标准与抗洪能力；恢复林草植被，遏止水土流失，从源头上控制泥沙入河等。  相似文献   

Fuzzy expert system for economic zonation of an ornamental slate deposit     

J. Taboada  C. Ordez  A. Saavedra  G. Fiestras-Janeiro 《Engineering Geology》2006,84(3-4):220-228

Investigation of deposits for traditional extraction activities (metals and coal) has generally been based on determining grade, or content, of the required material. In order to apply the grade concept to an ornamental rock such as slate, it is first necessary to define the variables that determine both the geotechnical recovery rate for the rock mass — which conditions the size of the extracted blocks – and the aesthetic features of the slate — which define the quality of the slabs as potential roofing material.

For this research, geotechnical and aesthetic data for a slate deposit were collected from 16 continuous core borehole samples. A fuzzy expert system was then developed using this data, defining the rock mass recovery rate and slab quality in accordance with the criteria of a slate expert, producing as a final output a zonation of the deposit in terms of top quality slate, medium quality slate or waste.

A mathematical model based on fuzzy logic was chosen due to the fact that the boundaries between different quality groups in a deposit are not clearly distinguished. Moreover, quality also depends on a company's infrastructures for transformation of the blocks, and also on its commercial strategies.  相似文献   

River bank erosion control by soil nailing   总被引：2，自引：0，他引：2  

Satyendra Mittal  A. K. Biswas 《Geotechnical and Geological Engineering》2006,24(6):1821-1833

A study has been done for analysing soil nailed cuts with circular type wedge failure by friction circle method. Various parameters such as nail length, nail diameter, nail inclination, wall inclination and angle of internal friction of soil have been considered to determine the factor of safety of nailed open cuts. The study shows that for cohesionless soil nailed cut, factor of safety increase with increase of parameters like angle of internal friction of soil, length of nail (L) versus height of cut (H) ratio, cohesion of soil and nail inclination (upto 15°) with horizontal. The study revealed that nails grouted with cement perform better than driven nails. A case study further confirms the analytical findings. Received 7 October  相似文献   

Threshold velocity for wind erosion: the effects of porous fences   总被引：3，自引：0，他引：3  

Zhibao Dong  Guangqiang Qian  Wanyin Luo  Hongtao Wang 《Environmental Geology》2006,51(3):471-475

Porous fence is a kind of artificial windbreak that has many practical applications. The threshold wind velocities at different distances downwind from porous fences were measured and the corresponding characteristics of particle movement observed to assess their shelter effect. It is found that the fence’s porosity is the key factor that determines the resulting shelter effect. The area near a fence can be typically classified into five regions, each with a different mode of particle movement. Dense fences, and especially solid fences, favor the accumulation of sand upwind of the fences. Fences with porosities of 0.3–0.4 produce the maximum threshold wind velocity; those with porosities of 0.3–0.6 (depending on the fence height) provide the maximum effective shelter distance. It is confirmed that the fence porosities of 0.3–0.4 that have been proposed for practical application in previous research are the most effective for abating wind erosion.  相似文献   

Net Energy Payback and CO2 Emissions from Three Midwestern Wind Farms: An Update     

Scott W. White 《Natural Resources Research》2006,15(4):271-281

This paper updates a life-cycle net energy analysis and carbon dioxide emissions analysis of three Midwestern utility-scale wind systems. Both the Energy Payback Ratio (EPR) and CO₂ analysis results provide useful data for policy discussions regarding an efficient and low-carbon energy mix. The EPR is the amount of electrical energy produced for the lifetime of the power plant divided by the total amount of energy required to procure and transport the materials, build, operate, and decommission the power plants. The CO₂ analysis for each power plant was calculated from the life-cycle energy input data. A previous study also analyzed coal and nuclear fission power plants. At the time of that study, two of the three wind systems had less than a full year of generation data to project the life-cycle energy production. This study updates the analysis of three wind systems with an additional four to eight years of operating data. The EPR for the utility-scale wind systems ranges from a low of 11 for a two-turbine system in Wisconsin to 28 for a 143-turbine system in southwestern Minnesota. The EPR is 11 for coal, 25 for fission with gas centrifuge enriched uranium and 7 for gaseous diffusion enriched uranium. The normalized CO₂ emissions, in tonnes of CO₂ per GW_eh, ranges from 14 to 33 for the wind systems, 974 for coal, and 10 and 34 for nuclear fission using gas centrifuge and gaseous diffusion enriched uranium, respectively.  相似文献   

Environmental impacts of bench blasting at Hisarcik Boron open pit mine in Turkey   总被引：2，自引：0，他引：2  

Ali Kahriman  Umit Ozer  Mehmet Aksoy  Abdulkadir Karadogan  Gungor Tuncer 《Environmental Geology》2006,50(7):1015-1023

This paper presents the results of ground vibration measurements carried out in Hisarcik Boron open pit mine located on the west side of central Anatolia near Kütahya province in Turkey. Within the scope of this study to predict peak particle velocity (PPV) level for this site, ground vibration components were measured for 304 shots during bench blasting. In blasting operations, ANFO (blasting agent), gelatin dynamite (priming), and delay electric detonators (firing) were used as explosives. Parameters of scaled distance (charge quantity per delay and the distance between the source and the station) were recorded carefully and the ground vibration components were measured for all blast events using two different types of vibration monitors (one White Mini-Seis and one Instantel Minimate Plus Model). The absolute distances between shot points and monitor stations were determined using GPS. The equation of square root scaled distance extensively used in the literature was taken into consideration for the prediction of PPV. Then, the data pairs of scaled distance and particle velocity obtained from the 565 event records were analyzed statistically. At the end of statistical evaluation of the data pairs, an empirical relation which gives 50% prediction line with a reasonable correlation coefficient was established between PPV and scaled distance.  相似文献   

云南元-磨公路某高堑坡灾害发生机制及防治对策     

齐明柱 《中国地质灾害与防治学报》2006,17(2):19-22

论文根据现场地质调查,应用地质力学分析方法,分析了元-磨公路K235 160~600段高堑坡地质条件、病害发生机制和诱发因素。堑坡所在区域位于红河深大断裂与哀牢山深大断裂所夹持的哀牢山褶皱带内,属强烈侵蚀切割的低中山区,河流下切严重,河流阶地不发育。南溪河及其支流小曼萨河、叉河依附于不同时期生成的构造发育而成,堑坡位于小曼萨河注入南溪河的交汇部位小曼萨河的左岸。小曼萨河及南溪河所夹持的山体,尤其是堑坡所在的部位,已严重破碎、松弛,岩石似大块石堆垒状,坡面上的树木均明显地向小曼萨河方向倾倒。经地质力学配套分析,堑坡所依附的山梁形成于红河深大断裂生成期(γ4),堑坡岩体受多期构造活动的作用,其中NW65/°SW64°及NW63/°SW35°两组倾向临空的构造面控制坡体的稳定。堑坡具备发生变形破坏的地质条件,分析认为由于组成坡体的岩土强度不足而引起既有构造面的大型坍塌。连续降雨及温差是诱发因素。基于目前国内边坡防治技术、施工能力,提出了以“治”或“避”为主的防治对策。  相似文献   

江苏省矿山的主要生态环境问题及治理对策     

徐翠云 《中国地质灾害与防治学报》2006,17(2):160-163

江苏的经济发展较快,对矿产资源的需求量亦大。多年来的无序开采,对生态环境造成很大的破坏和影响,出现了山体植被遭受破坏、土地被占用、环境受污染、诱发地面沉降、地面塌陷等一系列问题,已影响到国民经济的发展。随着省人大和省政府关于限制开山采石和保护环境等政策、法规出台和落实,近几年乱采滥挖现象基本得到了有效的遏制。人们的环保意识得到了加强,不少矿山已逐步开始对环境治理,且初见成效。文章介绍了江苏生态环境现状、存在的主要问题和治理对策,以期引起各级政府和广大民众在对矿产资源开采的同时更要注重环境保护。  相似文献   

参数在线自调整模糊控制算法研究     

谌洪茂  贾宏伟  黄国辉 《华东地质学院学报》2006,29(3):277-282

针对间歇式热处理炉温度控制对象的特性要求,提出了参数在线自调整模糊控制与智能积分相结合的一种新型模糊控制方法。该方法的基本思想是在系统误差较大时,用参数在线自调整模糊控制算法以提高系统的响应;在系统误差较小时,加入智能积分作用以消除静态误差,智能积分作用是有选择的施加积分作用,克服了一般连续积分控制的缺点。论述了带智能积分参数在线自调整模糊控制器的设计及软件实现。并且通过在MATLAB软件上的仿真分析表明该方法的合理性及可行性。  相似文献   

SPOT5影像严格几何纠正方法研究   总被引：8，自引：1，他引：8  

宁晓刚  张晓东  胡进刚 《测绘信息与工程》2005,30(1):43-45

根据SPOT卫星的成像原理和特点,讨论了对SPOT5卫星影像按共线方程法进行有控制点的几何纠正的方法,经对关中、陕北和陕南三种地形的影像纠正结果进行对比检验,证明了该方法精度达到了较高水平。  相似文献