下扬子区大隆组的底界   总被引：1，自引：0，他引：1  

段金英 《地层学杂志》1990,14(3):209-215,T002

<正> 下扬子区大隆组化石丰富、牙形刺动物群以 Neogondolella subcarinata-N.chang-xingensis组合为特征,与长兴组一致;而菊石动物群既有长兴阶的Pseudotirolites,Ple-uronodoceras,Tapashanites分子,又有吴家坪阶的 Anderssonceras,Konglingites分子。郭佩霞同志协助笔者对江苏南京湖山、团山、安徽铜陵杨桃山、南陵丫山、泾县晏公  相似文献   

Mobility of heavy metals from tailings to stream waters in local zinc smelting activities contaminated site     

Taoze LIU Yuangen YANG Bangyu LIU Xiangyang BI Feili LI 《中国地球化学学报》2006,25(B08):41-42

It has been found that stream waters were severely contaminated with wastes from a long-time smelting factory in Hezhang, Guizhou, China. The main sources of contamination are the smelting wastes stored in the open air and abandoned in the vicinity of stream. A method of lead isotope was adopted in order to identify relations between tailings and water contamination. Representative samples of tailings and stream sediments were collected. Mineralogical characterizations were conducted using XRD and TEM/SEM, while acid digestion was carried out for determining metal contents. BCR sequential leaching tests were performed in order to assess metal mobility. The tremendous ‘actual＇ and ‘potential＇ mobility of heavy metals indicates that the smelting waste and stream sediments present a considerable threat to the environment. Besides the chemical remobilization of heavy metals from the sediments and the reworking of riverbed sediments act as a secondary source of pollution. Also groundwater and stream water were sampled in specific locations and were measured.  相似文献   

Increasing of efficiency of desulphurisation processes of coals during thermal destruction     

Turchanina Oksana Satin Vladimir Derevyanko Aleksey 《中国地球化学学报》2006,25(B08):51-52

As is well known, a high content of sulphur in coals is an effect of the post-depositional history of coal seams and one of the most important criteria of its use as a fuel. Sulphur in coals can cause a serious environmental and technological problem during their utilization. This problem is very actual for the Donetsk Basin because 734 mined seams out of the total of 1009 （73%） are comprised of coals with sulphur content -2%. The chemical pre-treatment as a first stage in their processing is widely used in order to effectively obtain the thermal destruction products of coals （such as semi-coke, coke, adsorbents, etc.） and to simultaneously utilize coal wastes. Development in pre-treatment methods for high-sulphur, low-rank coals is especially desirable for reducing the sulphur contents of the solid products. The aim of the present work is to investigate the influence of coal pre-treatment on the yield and composition of thermal destruction products, and the sulphur distribution among different components of the coals of different genetic types by reductivity （low-reduced LRC and reduced RC coals）. The thermal behavior of the coals was studied by means of the Fisher method （heated to 520℃, at a rate of 7℃/min）. The composition of the semi-coking gas was investigated by means of a VTI gas analyzer. The coal samples were chemically treated directly before thermal destruction by the introduction of 1-% solutions of radical polymerization initiator AAD （acrylic acid dinitrile C8H12N4） and products of coal-tar distillation （absorber oil）. Coal pre-treatment increases the semi-coke yield and its coking ability, and changes the liquid/gaseous product ratio.  相似文献   

空气潜孔锤与气举反循环钻进组合工艺在水文水井钻探中的应用          下载免费PDF全文

赵鸿杰  孙智杰 《探矿工程》2006,33(11):52-53

阐述了空气潜孔锤与气举反循环钻进组合工艺的技术特点和施工特点，通过两口水井施工实例充分展现了其在施工效率、成井质量、洗井效果、市场竞争等方面的优越性。  相似文献   

山东淄博煤矿大口径超深基岩排水孔钻井技术          下载免费PDF全文

赵光贞  刘玉仙  李海波 《探矿工程》2006,33(8):53-54

由于第四系、二叠系、石炭系岩性复杂及缩径、坍塌、漏失等情况，山东淄博煤矿大口径超深定向排水孔成井难度大。该井采用了水泥注浆堵漏和水泥造壁稳定孔壁，应用“气举反循环＋垂钻”钻进工艺方法控制钻孔顶角，应用阶梯式组合牙轮钻头、水泥固井止水等技术方法，达到了设计要求。  相似文献   

砂卵石层高压旋喷灌浆成墙的成孔技术          下载免费PDF全文

彭万军  曾鹏九  吴旭幸 《探矿工程》2006,33(8):32-34

讨论了回转钻进工艺、跟管钻进工艺、反循环回转钻进工艺、顶驱式回转钻进工艺以及振孔高喷成孔工艺在砂卵石层高压旋喷灌浆成墙中成孔施工适应性、有效性以及经济性。  相似文献   

偏心跟管技术在预应力锚索施工中的应用          下载免费PDF全文

张杰  周宏 《探矿工程》2006,33(11):35-37

通过对破碎岩层中锚索成孔施工的设备和技术参数等进行分析，总结出设备选型配食的方法，快速、高效的完成不良地质条件下预应力锚索的钻孔施工。  相似文献   

呼之欲出的青藏高原经济带     

《地理教学》2006,(12):5-6

  相似文献   

PDC钻头在寺河煤矿瓦斯预抽放钻井中的应用   总被引：2，自引：1，他引：2  

吴小建  李新民 《中国煤田地质》2006,18(1):64-65,68

在寺河矿区一期瓦斯地面预抽放钻井施工中，使用传统的镶齿三牙轮钻头钻进，钻进速度低，仅为2.0m／h，且井斜不易控制、钻头寿命短、成本较高。通过对寺河煤矿地层特征的分析，在二期工程施工中，9#煤以上地层优选六翼内凹式PDC钻头钻进，采取一定技术措施并合理调整钻压、转速及泵量等钻进参数，钻速可达7．0m/h，井斜也得到有效控制，降低了钻井成本。  相似文献   

勤奋耕耘——江西省核工业地质局四大产业聚焦     

《核地知与行》2006,(3):F0002

今年开展的居隆庵和大府上铀太勘查取得可喜成果。图为钻探工人操作钻机。  相似文献