地电阻率供电回路故障检测板的研制与使用     

郅红魁  赵彦旭  付靖  谢佳兴  尚淑珍 《地震地磁观测与研究》2021,42(1):69-75

地电阻率仪器在工作中容易出现无电流、电流不稳等故障现象,不易排查维修.通过对仪器工作原理和供电回路过程进行研究,发现供电回路中间仪器的内部或外部各接头接触不良是造成上述现象的主要因素.根据存在的问题,洛阳地震台研制出供电回路故障检测板.该检测板可利用其继电器上LED灯的工作状态和动作时序,快速查找、排除相关供电回路故障...  相似文献   

重力固体潮信号的独立成分分析与谱相关解调     

高略  全海燕 《测绘科学》2019,44(1):10-15

针对提取重力固体潮潮汐谐波分量,分析各谐波分量间调制关系的问题,该文结合重力固体潮的产生机制建立了一种重力固体潮信号正交分解模型。利用独立分量分析算法和谱相关方法,分离出与模型相对应的独立分量信号,并从独立成分中解调出载波分量和被调制分量。从而完整地描述了地球自转产生的潮汐谐波与月球、太阳相对于地球轨道变化产生的潮汐谐波的正交分解关系。实验表明,此方法能有效地提取出重力固体潮信号中所包含的潮汐谐波信息,并揭示出该重力固体潮信号中存在3个线性叠加的独立分量,在月波分量和年波分量都以乘性调制的方式调制到半日波分量和日波分量上。  相似文献   

利用椭球变换建立独立坐标系的方法     

蔡婧  郭际明  谢灯兵 《地理空间信息》2019,17(7):87-90,I0003

详细阐述了8种利用椭球变换建立独立坐标系的方法,推导了独立坐标系高程面与椭球面之间的相互关系,进而建立了椭球变换模型,减少了高程归化变形;并通过计算实例对其投影变形值进行分析,以探究不同方法间的特点与差异,得出了一些有益的结论。  相似文献   

最短独立闭合环与附合路线的快速搜索方法     

游为  范东明  付淑娟 《测绘科学》2009,34(4)

提出了一种间接平差误差方程转化为条件平差条件方程的快速且易实现自动化的方法,同时采用矩阵分析理论,通过对条件方程进行特殊的矩阵分块及变换,自动搜索出水准网或GPS网的最短独立闭合环与附合路线,并自动解算出闭合差。上述方法有别于传统的图论理论,不依赖于任何信息文件,算法简单,自动化程度高。  相似文献   

Evaluation of Inference Adequacy in Cumulative Logistic Regression Models: An Empirical Validation of ISWRidge Relationships     

Cheng-Wu CHEN  Hsien-Chueh Peter YANG  Chen-Yuan CHEN  Alex Kung-Hsiung CHANG  Tsung-Hao CHEN   《中国海洋工程》2008,22(1):43-56

Internal solitary wave propagation over a submarine ridge results in energy dissipation, in which the hydrodynamic interaction between a wave and ridge affects marine environment. This study analyzes the effects of ridge height and potential energy during wave-ridge interaction with a binary and cumulative logistic regression model. In testing the Global Null Hypothesis, all values are p 〈0.001, with three statistical methods, such as Likelihood Ratio, Score, and Wald. While comparing with two kinds of models, tests values obtained by cumulative logistic regression models are better than those by binary logistic regression models. Although this study employed cumulative logistic regression model, three probability functions p^1, p^2 and p^3, are utilized for investigating the weighted influence of factors on wave reflection. Deviance and Pearson tests are applied to cheek the goodness-of-fit of the proposed model. The analytical results demonstrated that both ridge height （X1 ） and potential energy （X2 ） significantly impact （p 〈 0. 0001 ） the amplitude-based refleeted rate; the P-values for the deviance and Pearson are all 〉 0.05 （0.2839, 0.3438, respectively）. That is, the goodness-of-fit between ridge height （ X1 ） and potential energy （X2） can further predict parameters under the scenario of the best parsimonious model. Investigation of 6 predictive powers （ R2, Max-rescaled R^2, Sorners＇ D, Gamma, Tau-a, and c, respectively） indicate that these predictive estimates of the proposed model have better predictive ability than ridge height alone, and are very similar to the interaction of ridge height and potential energy. It can be concluded that the goodness-of-fit and prediction ability of the cumulative logistic regression model are better than that of the binary logistic regression model.  相似文献   

Evaluation of Inference Adequacy in Cumulative Logistic Regression Models： An Empirical Validation of ISW-Ridge Relationships   总被引：3，自引：0，他引：3  

Hsien-Chueh Peter YANG  Alex Kung-Hsiung CHANG  Tsung-Hao CHEN 《中国海洋工程》2008,22(1)

Internal solitary wave propagation over a submarine ridge results in energy dissipation, in which the hydrodynamic interaction between a wave and ridge affects marine environment. This study analyzes the effects of ridge height and potential energy during wave-ridge interaction with a binary and cumulative logistic regression model. In testing the Global Null Hypothesis, all values are p<0.001, with three statistical methods, such as Likelihood Ratio, Score, and Wald. While comparing with two kinds of models, tests values obtained by cumulative logistic regression models are better than those by binary logistic regression models. Although this study employed cumulative logistic regression model, three probability functions p^1, p^2 and p^3, are utilized for investigating the weighted influence of factors on wave reflection. Deviance and Pearson tests are applied to check the goodness-of-fit of the proposed model. The analytical results demonstrated that both ridge height (X1) and potential energy (X2) significantly impact (p<0.0001) the amplitude-based reflected rate; the P-values for the deviance and Pearson are all >0.05 (0.2839, 0.3438, respectively). That is, the goodness-of-fit between ridge height (X1) and potential energy (X2) can further predict parameters under the scenario of the best parsimonious model.Investigation of 6 predictive powers (R2, Max-rescaled R2, Somers'D, Gamma, Tau-a, and c, respectively) indicate that these predictive estimates of the proposed model have better predictive ability than ridge height alone, and are very similar to the interaction of ridge height and potential energy. It can be concluded that the goodness-of-fit and prediction ability of the cumulative logistic regression model are better than that of the binary logistic regression model.  相似文献   

基于独立坐标系相邻地形图的拼接处理     

范玖国  王全全  姜元军  张广兴 《测绘标准化》2009,(2):34-36

随着测绘技术的不断发展,各种工程用图也采用了独立坐标系,对于大范围或者高低起伏过大的测区,需要建立多个独立坐标系。为了满足设计或者规划的需求,需要对更多的分幅地形图进行拼接。介绍了基于独立坐标系地形图的拼接处理,分析了拼接处理的不同方法。认为地形图的拼接是测绘中的重要环节,必须认真对待,严格处理好。  相似文献   

浅谈独立坐标系的建立     

张启元 《青海国土经略》2009,(4):23-24

当测区远离中央子午线或平均高程较高时,基于满足工程测量中测量精度的要求,缩小长度投影变形的影响等因素,应建立地方独立坐标系。本文就建立地方独立坐标系谈一点认识。  相似文献   

抽水和建筑荷载双重作用下的地面沉降模型   总被引：1，自引：0，他引：1  

赵慧  钱会  李渊  彭建兵 《地球科学与环境学报》2008,30(1):57-60

依据含水层质量守恒原理,推导了非固结地层在建筑荷载作用下的地面沉降机理模型,并将其与Jacob假定下抽水引起的地面沉降弹性模型相比较,结果发现两种模型的机理表达式完全一致,仅区别于水动力原因或实质的不同.在同一坐标系中,根据线性叠加原理,抽水沉降漏斗和荷载沉降漏斗可能都落在地下水位降落漏斗内.假定两者为相互独立事件,给出了抽水和建筑荷载双重作用下的地面沉降模型,表明其如果以水位降深为制约因子,则可以对水动力实质完全不同的两种沉降过程进行线性叠加计算.  相似文献   

大管岛多能互补独立发电系统的发电量设计     

熊焰  王海峰  崔琳  郭毅  黄勇 《海洋技术学报》2009,28(1)

结合大管岛居民用电需求,论述了当采用波浪能、太阳能、风能多能互补的独立发电系统时的发电量设计,并根据电力需求与波浪能、太阳能、风能能源资源的季节性变化进行了多能互补的供电效果分析.  相似文献