金川镍铜矿床数学模型对深部矿化变化趋势的指示     

田毓龙  把多恒  高志武  洪托  陈兴义  卢耀军 《地质与勘探》2008,44(1):82-88

按矿化特征将金川X矿区主矿体分为致密块状特富矿、海绵状富矿和浸染状贫矿.应用MicroMine软件对3类矿化体分别建立了数学模型,并应用距离平方反比法对模型单元块进行了镍、铜品位估值.通过分析和对比矿床数学模型900m至1300m不同水平剖面上的Ni、Cu品位及Ni/Cu比值的变化,得出在X矿区的中部西侧是一个Ni和Cu的矿化中心,并且向深部Cu的矿化强度高于Ni.  相似文献   

EPR investigation of the methyl radical,the hydrogen atom and carbon oxide radicals in Maxixe-type beryl     

Lars Olov Andersson 《Physics and Chemistry of Minerals》2008,35(9):505-520

The EPR spectra of Maxixe-type beryl contain a large number of overlapping signals. The angular dependence of the 1:3:3:1 signal typical for the CH₃ radical shows that this radical is located at the center of the channel cavity with its symmetry axis parallel to the crystal c-axis and is rotating around this axis. Its EPR spectrum is axially symmetric with g _// = 2.00263, g _⊥ = 2.00249 and A_// = 2.288 mT, A_⊥ = 2.256 mT. These anisotropies have the opposite signs of those found for surface-adsorbed methyl radicals. Hydrogen atoms are located at position 2a at the center of the beryl cavity and the EPR parameters of the narrow doublet signal are A ₀ = 1,407 MHz and g = 2.00230. Another doublet signal, which is broader and has axial symmetry with g _// = 2.00265, g _⊥ = 2.00625 and A_// = 0.895 mT, A_⊥ = 0.885 mT, could come from a HCO₃ radical. One narrow and easily saturated signal with g _// = 2.00227 and g _⊥ = 2.00386 is interpreted to arise from a carbon monoxide radical in the beryl channel, oriented with its axis parallel to the crystal c-axis. Additional weak doublet lines, which have similar g values as the carbon monoxide radical, are created by nearby hydrogens. A powder spectrum with g _// = 2.0017 and g _⊥ = 2.0004 appears upon UV irradiation of the single crystal and is easily saturated. This spectrum is interpreted to arise from a carbon dioxide radical, which rotates around its symmetry axis.  相似文献   

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints   总被引：2，自引：2，他引：0  

N. Fardin 《Rock Mechanics and Rock Engineering》2008,41(2):267-297

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran  相似文献   

Detection of free vertical convection and double-diffusion in groundwater monitoring wells with geophysical borehole measurements     

Susann Berthold  Frank Börner 《Environmental Geology》2008,54(7):1547-1566

Two algorithms for in-situ detection and identification of vertical free convective and double-diffusive flows in groundwater monitoring wells or boreholes are proposed. With one algorithm the causes (driving forces) and with the other one the effects (convection or double-diffusion) of vertical transport processes can be detected based on geophysical borehole measurements in the water column. Five density-driven flow processes are identified: thermal, solutal, and thermosolutal convection leading to an equalization, as well as saltfingers and diffusive layering leading to an intensification of a vertical density gradient. The occurrence of density-driven transport processes could be proven in many groundwater monitoring wells and boreholes; especially shallow sections of boreholes or groundwater monitoring wells are affected dramatically by such vertical flows. Deep sections are also impaired as the critical threshold for the onset of a density-driven flow is considerably low. In monitoring wells or boreholes, several sections with different types of density-driven vertical flows may exist at the same time. Results from experimental investigations in a medium-scale testing facility with high aspect ratio (height/radius = 19) and from numerical modeling of a water column agree well with paramters of in-situ detected convection cells.  相似文献   

TBM在不良地质洞条件下的施工技术          下载免费PDF全文

刘大军  张益忠 《探矿工程》2008,35(10):60-65

TBM掘进机以其快速、高效、安全、优质等优点越来越广泛地被应用于隧洞开挖施工中,尤其更适用于深埋超长隧洞,然而在不良地质洞段中TBM掘进缓慢,甚至有卡刀可能,反而不如钻爆法灵活,这就需要根据围岩性状采取特殊技术处理措施,辅以监控量测手段对支护方案进行验证、调整支护措施、修正设计参数等。结合辽宁大伙房输水隧洞工程,总结了在不良地质洞条件下的超前地质预报方法、不良地质段处理措施以及围岩变形监测方法。  相似文献   

滑坡体三维地质建模与可视化分析   总被引：1，自引：0，他引：1  

李明超  胡兴娥  安娜  刘杰 《岩土力学》2008,29(5):1355-1360

针对滑坡地质研究的自身特点,提出了面向滑坡地质体三维建模的NURBS-BRep混合数据结构和地质结构单元实体构造技术.通过对滑坡基础地质数据的预处理、滑坡数字地形和滑动面的三维建模、地质结构面的系统构造、地质结构体的生成和显示,形成了一套完整的滑坡三维地质模型的构建方法.将该方法应用于某水库滑坡,建立了相应的三维滑坡地质模型,并基于此模型进行了三维剖切分析、数字钻孔、等值线生成、滑块自动剖分、滑坡失稳可视化动态模拟和滑坡体方量精确计算等一系列实用的可视化分析,为滑坡稳定性的准确计算和客观评价提供了有力的支持.  相似文献   

加强技术创新服务地质调查——庆祝探矿工艺研究所成立30周年   总被引：1，自引：1，他引：0  

胡时友  彭文范  周良宗 《探矿工程》2008,35(7):1-4

为加强地质探矿技术力量,改变地质装备落后现状,经国务院批准,1978年8月8日成立了探矿工艺研究所。30年来,经过新老两代工艺所人的艰苦奋斗、刻苦钻研、勇于创新,在科研攻关、成果转化、基地建设和管理等方面都取得了可喜的成绩,为国家的地质科学事业做出了贡献,目前已成为一个“以勘查技术为基础,以承担地质调查任务和科研项目、提供勘查与监测技术方法和技术服务为手段,以服务国家经济建设、社会发展和地质工作为目标,以探矿工艺技术和地质灾害监测防治技术研发为主业”的地质调查科研机构。回顾了工艺所艰苦创业、改革进取的发展历程,对科技体制改革、专业结构调整、人事分配制度改革、地质调查和科研工作进行了总结,展示了丰硕的科研成果和强劲的科技实力;指出了工艺所在“十一五”期间地质调查和科研工作的重点领域和优先发展方向。  相似文献   

铁同位素的MC-ICP-MS测定方法与地质标准物质的铁同位素组成   总被引：22，自引：5，他引：17  

朱祥坤  李志红  赵新苗  唐索寒  何学贤  Nick S. Belshaw 《岩石矿物学杂志》2008,27(4):263-272

详细报道了在低分辨和高分辨模式下运用MC-ICP-MS进行Fe同位素比值高精度测试的方法,对Fe同位素测定过程中谱峰干扰、基质效应、浓度效应、仪器测试的长期重现性等问题进行了评估,并对两种运行模式的测试结果进行了对比.在95%的可信度范围内,所建方法的外部精度优于0.5ε/ainu,达到国际同类实验室的先进水平,并且低分辨和高分辨两种模式下获得的Fe同位素测试结果是一致的.在此基础上对国家地质标准物质GBW07105(玄武岩)和GBW 07111(花岗闪长岩)进行了Fe同位素测定.相对于Fe同位素国际标样IRMM-014,GBW07105的Fe同位素成分为:ε57Fe=1.9±0.3(20),ε56Fe=1.3±0.2(2σ),ε57/56Fe=0.6±0.1(2σ);GBW 07111的Fe同位素成分为:ε57Fe=1.8±0.4(2σ),ε56Fe=1.2±0.2(2σ),ε57/56Fe=0.6±0.1(2σ).  相似文献   

在基于数字填图系统的1：25万区域地质调查修测中前人地质资料的利用与数据采集     

覃小锋  ;周开华  ;胡贵昂  ;周府生  ;李广宁  ;谢凌锋  ;潘艺文 《中国区域地质》2008,(7):986-994

1：25万区域地质调查修测的核心任务是挖掘、利用前人资料和对前人资料的二次开发。在1：25万玉林市幅数字地质填图试点的过程中．总结出一套基于数字填图系统的前人地质资料利用与数据采集的工作方法。其工作流程和工作步骤可分为6个阶段：①前期准备阶段;②室内地质资料录八阶段;③野外数字地质调查阶段;④室内资料整理阶段;⑤图件编制阶段;⑥成果提交阶段。该工作方法与传统的地质调查方法相比,提高了地质调查的工作效率和质量,已基本上达到了在1：252万区调修测区推广应用的“实战性”要求。  相似文献   

贵州绥阳双河洞国家地质公园洞穴基本特征及成因探讨   总被引：7，自引：0，他引：7  

刘平 《贵州地质》2008,25(4)

106地质大队于1959～1960年曾对双河洞石膏矿进行过地质勘查。1986年～2006年4月,先后有中、法、日等国专家19次进双河洞考察,初步查明了该洞总长度为105.7km,是亚洲第二长洞,在世界上排名第16位。该洞不仅规模宏大,网络复杂,且有一定数量的次生淋滤型石膏矿分布,成为国内外罕见的独特洞穴景观。双河洞自2004年荣获国家地质公园称号以来,已引起国内外专家的广泛关注。该洞的形成,与该区域大范围内下寒武统清虚洞组上部至中寒武统平井组下部白云岩中,含大量硬石膏层有着密切的成因联系。  相似文献