RESEARCH ON PASSIVE SERVO SEISMIC ROTATIONAL ACCELERATION SENSOR WITH LARGE DAMPING          下载免费PDF全文

QU Ming-zhe  GAO Feng  YANG Xue-shan  YANG Dong-xia 《地震地质》2018,40(5):1170-1178

Many strong motion records show that under the strong seismic vibration of, the torsional disfigurement of building structures is a common and serious damage. At present, there are no special sensors for measuring seismic rotation in the world. Most of the experts obtain rotational components through observing deformation, theoretical analysis and calculation. The theory of elastic wave and source dynamics also prove the conclusion that the surface of the earth will rotate when an earthquake occurs. Based on a large number of investigations and experiments, a rotational acceleration sensor was developed for the observation of the rotational component of strong ground motions. This acceleration sensor is a double-pendulum passive servo large-damped seismic rotational acceleration sensor with the moving coil transducer. When an earthquake occurs, the seismic rotational acceleration acts on the bottom plate at the same time. The magnetic circuit system and the middle shaft fixedly connected to the bottom plate follow the bottom plate synchronous vibration, and the moving part composed of the mass ring, the swing frame and the moving ring produces relative corners to the central axis. The two working coils mounted on the two pendulums produce the same relative motion with respect to the magnetic gaps of the two magnetic circuits. Both working coils at this time generate an induced electromotive force by cutting magnetic lines of force in the respective magnetic gaps. The generated electromotive forces are respectively input to respective passive servo large damper dynamic ring transducer circuits and angular acceleration adjusting circuits, and the signals are simultaneously input to the synthesizing circuit after conditioning. Finally, the composite circuit outputs a voltage signal proportional to the seismic rotational acceleration to form a seismic rotational acceleration sensor. The paper presents the basic principles of the rotational acceleration sensor, including its mechanical structure diagram, circuit schematic diagram and mathematical models. The differential equation of motion and its circuit equation are derived to obtain the expressions of the main technical specifications, such as the damping ratio and sensitivity. The calculation shows that when the damping ratio is much larger than 1, the output voltage of the passive servo large damping dynamic coil transducer circuit is proportional to the ground rotation acceleration, and the frequency characteristic of bandpass is wider when the damping ratio is larger. Based on the calibration test, the dynamic range is greater than or equal to 100dB and the linearity error is less than 0.05%. The amplitude-frequency characteristics, the phase-frequency characteristics and their corresponding curves of the passive servo rotational acceleration sensor are acquired through the calculations. Based on the accurate measurement of the micro-vibration of the precision rotating vibration equipment, the desired result is obtained. The measured data are presented in the paper, which verify the correctness of the calculation result. The passive servo large damping rotational acceleration sensor has simple circuit design, convenient operation and high resolution, and can be widely applied to seismic acceleration measurement of earthquake or structure.  相似文献   

基于ECR与ECI星历数据的遥感影像定位     

程春泉  邓喀中  张继贤  孙钰珊 《测绘科学》2010,35(2):13-15

经典的共线方程中物方坐标系建立在地球表面,在航天摄影测量中,地面摄影测量坐标系的应用,增加了不同类型测量数据间联合处理的难度,限制了影像数据摄影测量处理的空间范围。本文介绍了基于视线方向的影像对地定位算法原理,并以此为基础建立了地心系下的航天影像摄影测量共线方程。针对地固地心系和空固地心系下星历数据的不同点,建立了基于两种地心系下星历数据的航天遥感影像定位严密模型,并对两种模型中偏流角处理的不同点进行了分析,最后给出了一个应用试验。  相似文献   

异构传感器网络基于身份的认证及密钥协商方案     

付小晶  张国印  马春光 《武汉大学学报(信息科学版)》2010,(5)

结合身份密码体制,提出了一个基于身份和地理位置信息的异构传感器网络(HSN)节点间的双向认证及密钥协商方案。不同性能节点之间采用不同的协议完成身份认证和密钥建立,充分发挥了高性能节点的能力,降低了低性能节点的能耗。该方案具有完美前向保密性和主密钥前向保密性,具有较好的抗节点伪造、节点复制和女巫攻击能力。分析与仿真表明,该方案具有较好的安全性。  相似文献   

丽江高美古的二期选址--望远镜地面高度的确定     

钱铜铃  汪从云  岑学奋  王建成 《天文研究与技术》2003,(2):75-81

在丽江高美古前期选址工作的基础上[1～2],二期选址的望远镜地面高度的确定工作于2000年11月3日至2000年12月16日进行,采用30m铁塔的温度脉动测量装置,对6#选址观测点的近地面大气湍流进行反复多次测量,得到近地面不同高度(4～30m和8～22m)上每夜温度结构系数C2T的平均值,对观测取得的资料作进一步处理和分析,得到高美古6#观测点的望远镜地面高度为13～15m。  相似文献   

Optimal instrumentation of uncertain structural systems subject to earthquake ground motions     

Ernesto Heredia-Zavoni  Luis Esteva 《地震工程与结构动力学》1998,27(4):343-362

A criterion is proposed for making decisions regarding the optimal location of a given number of sensors to record the seismic response of a structure for identification purposes. The optimal location of the sensors is selected so that the expected value of a Bayesian loss function, expressed in terms of the Fisher information in the recordings, is minimized. The criterion is applied to the case of multi-degree-of-freedom systems with uncertain structural properties subjected to earthquake ground motions modelled as stationary stochastic processes. The use and capabilities of the criterion are thoroughly illustrated by means of an example. Results are used to assess the influence of record duration, recording noise, and ground motion frequency content and amplitude, on the optimal location of accelerometers as well as on the reduction of prior uncertainty about the structural parameters. © 1998 John Wiley & Sons, Ltd.  相似文献   

震后桥梁挠度测量方法的设计与实现          下载免费PDF全文

林元茂  李建  韩立 《地震工程学报》2019,41(3):807-812

对震后桥梁稳定性与安全性检测过程中,挠度是一项重要检测指标,但是测量这一参数较为复杂,干扰较多,结果存在较大问题。设计一种震后桥梁挠度测量方法。根据实际桥梁设置相关参数,采用共轭梁法计算震后桥梁固定点的初始挠度,结合震后桥梁挠度曲线函数,获得欲求解的桥梁截面挠度值;修正桥梁截面挠度值时,将监测点高程差同基准点高程差间的差值问题替代挠度偏差问题,分析倾斜传感器获取维护点倾斜传感器的理论值和基准点倾斜传感器的理论值,确定挠度偏差,修正震后桥梁挠度测量值。通过简支梁与连续梁实验,验证测量震后桥梁挠度时,具有更高测量精度。  相似文献   

Optimal instrumentation of structures on flexible base for system identification     

E. Heredia-Zavoni  R. Montes-Iturrizaga  L. Esteva 《地震工程与结构动力学》1999,28(12):1471-1482

A criterion previously developed by Heredia-Zavoni and Esteva for selecting optimal sensor locations is used to analyse the optimal instrumentation of structures on soft soils. The stochastic response of a linear structural system on a flexible base is formulated for use of the criterion. The case of MDOF shear systems on flexible base, with uncertain lateral stiffness and subjected to random earthquake ground motions, is studied. The optimal location of accelerometers, the reduction of prior uncertainty on the lateral stiffness, the effects of the base flexibility, the relative influence of translation and rocking of the base, and the influence of recording noise are assessed and discussed. Copyright © 1999 John Wiley & Sons, Ltd.  相似文献   

泥蚶(Tegillarca granosa)重组铁蛋白富集重金属离子的特性及化学传感器的研究     

张涛  苏倡  刘艳  张迪骏  周君  芦晨阳  明庭红  司开学  苏秀榕 《海洋与湖沼》2017,48(4):870-876

利用泥蚶(Tegillarca granosa)铁蛋白原核表达工程菌获得的重组铁蛋白,通过圆二色光谱分析蛋白二级结构,扫描电镜和电感耦合等离子质谱研究重组铁蛋白富集Fe~(2+)、Mn~(2+)、Cd~(2+)、Cr~(3+)、Hg~(2+)、Pb~(2+)和As~(3+)等7种重金属离子的特性,同时探索利用重组铁蛋白修饰丝网印刷电极,设计和制备重组铁蛋白检测Pb~(2+)和Cd~(2+)浓度的电化学生物传感器。结果表明复性成功的铁蛋白多为完整的?-螺旋结构,而复性不成功的蛋白聚集体则多为无规卷曲。重组铁蛋白的直径和形态与富集的离子种类有关。泥蚶铁蛋白对单一金属离子Fe~(2+)和Mn~(2+)的富集凸显优势。对两种混合金属离子的富集大多表现为竞争关系。但重组铁蛋白对Hg~(2+)和As~(3+)混合组的富集量明显高于单一金属离子组的富集量,对Hg~(2+)和As~(3+)混合组的富集表现出协同促进作用。重组铁蛋白传感器对Pb~(2+)和Cd~(2+)溶液的最低检测限为10μg/L。  相似文献   

Efficient Bayesian sensor placement algorithm for structural identification: a general approach for multi‐type sensory systems          下载免费PDF全文

Ka‐Veng Yuen  Sin‐Chi Kuok 《地震工程与结构动力学》2015,44(5):757-774

In this paper, a Bayesian sequential sensor placement algorithm, based on the robust information entropy, is proposed for multi‐type of sensors. The presented methodology has two salient features. It is a holistic approach such that the overall performance of various types of sensors at different locations is assessed. Therefore, it provides a rational and effective strategy to design the sensor configuration, which optimizes the use of various available resources. This sequential algorithm is very efficient due to its Bayesian nature, in which prior distribution can be incorporated. Therefore, it avoids the possible unidentifiability problem encountered in a sequential process, which starts with small number of sensors. The proposed algorithm is demonstrated using a shear building and a lattice tower with consideration of up to four types of sensors. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

一种洪涝灾害事件信息建模方法     

陈泽强  陈能成  杜文英  宋凡 《地球信息科学学报》2015,17(6):644-652

我国洪涝灾害频发且危害巨大,为有效防灾、减灾和救灾,需建立洪涝灾害事件信息模型,表示和共享洪涝灾害信息。然而,目前事件信息模型主要是表示静态信息,缺乏对洪涝灾害事件动态过程的表示。本文从观测角度出发,建立顾及洪涝灾害事件阶段和动态过程的洪涝灾害事件信息模型。围绕洪涝灾害事件信息模型,提出了10类需建模的元素,并以MOF（Meta Object Facility）建模框架构建了十元组模型,通过映射方法实现模型编码方案与事件模式语言的映射。最后,以2010年梁子湖洪涝灾害模拟为例,开展了模型分阶段建立过程实验。结果表明,本文提出的模型能表示洪涝灾害事件的动态信息和实现洪涝灾害事件的动态建模。  相似文献