1995年永登5.8级地震多种前兆异常特征   总被引：3，自引：5，他引：3       下载免费PDF全文

杜学彬  李步云  刘耀炜 《地震工程学报》1997,19(4):19-24

研究了１９９５年７月２２日甘肃永登５．８级地震地电、水化学、水动态、地应力、地形变等５种前兆的异常特征，得到如下结论：①该次地震中短期（１年尺度）和短临异常空间分布符合“异常震源地点发震机制主要活断层”之间的特定关系，近２～３年的中期异常集中分布在西秦岭北缘北西向断裂带和海原通渭武都南北向断裂带上；②震前约１年时间尺度震源区发育起来了北北西南南东向挤压变化突出的附加应力场，并引起断层错动；③源兆集中分布在本次地震震源周围，场兆集中分布在上述两条活动断裂带上．源兆占异常的大多数，场兆占少数．在时间上场兆出现在先，源兆在后．  相似文献   

观测应变阶在地震应力触发研究中的应用   总被引：17，自引：2，他引：17       下载免费PDF全文

邱泽华  石耀霖 《地震学报》2004,26(5):481-488

对中国钻孔应变台网观测到的昆仑山口西MS8.1大地震的应变阶资料的研究结果表明:① 很多观测值与静力位错理论计算值不符合；② 北方地震较活跃地区的很多台站观测到异常大的应变阶，而南方构造运动较不活跃地区的台站虽然也观测到地震波动，但是应变阶不明显. 由此推断，地震的触发（可能是动态触发）作用对远场的实际地震应变变化具有重要影响. 也就是说，远场的构造活动（可能是断层活动）是否曾被地震触发，可能决定当地的应变场变化的主要特征. 进一步对昌平台1999年3月11日张北地震与1999年11月1日大同地震的观测资料对比分析表明:断裂带的分布情况对实际地震应变变化有直接影响. 这证明观测到的异常大的地震应变阶可能是地震触发了当地的断层活动的表现.   相似文献   

3-D rheologic model of earthquake preparation (II): Strain field and its applications     

宋治平  尹祥础  梅世蓉 《地震学报(英文版)》2004,17(2):131-143

Introduction Based on the elastic theory of the hard inclusion (Dobrovolskii, 1991), we developed an inclusion theory of rheologic medium, and applied the results of bulk-strain field of a rheologic inclusion model to explain the spatial-temporal evolution process of earthquake precursors (SONG, et al, 2000). In the former paper (SONG, et al, 2003), we derived the viscoelastic displacement field of the rheologic inclusion model on the basis of the analytic expression of displacement field o…  相似文献   

Developments of borehole strain observa- tion outside China     

邱泽华  石耀霖 《地震学报(英文版)》2004,17(Z1)

Introduction The Earth′s crust deforms in the regional tectonic stress field. Borehole strain observation isone important means for studies on the crustal deformation and the stress field. QIU and ZHANG(2002) have introduced the current situation of borehole strain observation in China. OutsideChina, early in September of 1968, Sacks of Carnegie Institution of Washington and Evertson ofUniversity of Texas firstly invented a borehole dilatometer in the world (Sacks, Evertson, 197…  相似文献   

Strain field measurements of rubber by image analysis and design criteria for laminated rubber bearings (LRB)     

Chamindalal Sujeewa Lewangamage  Masato Abe  Yozo Fujino  Junji Yoshida 《地震工程与结构动力学》2004,33(4):445-464

Although seismic isolation rubber bearings in bridges and buildings have proven to be a very effective passive method for reducing earthquake‐induced forces, a detailed mechanical modeling of the rubber that is used in bearings under large strains has not been established. Therefore, a 3D model of failure behavior and the design criteria for the safety evaluation of seismic isolation bearings have not yet been developed. This paper presents: (1) correlation‐based template‐matching algorithms to measure large strain fields of continua; (2) a failure criterion for rubber; and (3) the design criteria for the safety evaluation of laminated algorithms, data‐validation algorithms were developed and implemented to eliminate possible unrealistic displacement vectors present in the measured displacement field. The algorithms were successfully employed in the strain field measurement of LRB and rubber materials that are subjected to failure. The measured local strains for rubber material at failure were used to develop a failure criterion for rubber. The validity of the proposed criterion was evaluated by applying it to the LRB; the criterion was introduced into a 3D finite element model of LRB, compared with the experimental results of bearings failure, and verified. Finally, design criteria are proposed for LRB for the safety evaluation. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Seismic tests on reinforced concrete and steel frames retrofitted with dissipative braces     

F. J. Molina  S. Sorace  G. Terenzi  G. Magonette  B. Viaccoz 《地震工程与结构动力学》2004,33(15):1373-1394

Seismic tests have been conducted on two 3‐storey structures protected with pressurized fluid‐viscous spring damper devices. One of the structures was a reinforced concrete frame with clay elements in the slabs, while the other one was a steel frame with steel/concrete composite slabs. The spring dampers were installed through K bracing in between the floors. The tests were performed by means of the pseudodynamic method, which allowed the use of large and full‐size specimens, and by implementing a specific compensation strategy for the strain‐rate effect at the devices. The test results allowed the verification of the adequacy of the attachment system as well as the comparison of the behaviour of the unprotected buildings with several protected configurations, showing the benefits of the application of the devices and the characteristics of their performance. The response of the protected structures was always safer than that of the unprotected ones mainly due to a significant increase of equivalent damping. The increase in the damping ratio depends on the level of deformation. Copyright © 2004 John Wiley & Sons, Ltd.  相似文献   

The Present Space-Time Motion and Deformation Features of the Northeastern Margin of the Qinghai-Xizang（Tibet） Block and Its Adjacent Area     

Zhang Xiaoliang 《中国地震研究》2004,18(2):161-170

On the basis of Discontinuous Deformation Analysis (DDA), and considering the moderate intrusion of specific block boundaries to different extents, the first-order block motion model is established for the northeastern margin of Qinghai-Xizang(Tibet) block and the kinematical model for depicting deformation of small regions as well by using GPS observations of three periods (1991, 1999 and 2001). By simulating, we obtained the motion features of the firstorder blocks between the large WWN faults on the sides of the studied region, the distribution features of the principal strain rate field and the inhomogeneous motion features with spacetime of the faults in the northern boundary of the Qinghai-Xizang (Tibet) block.  相似文献   

A Physical and Numerical Investigation on the Stability of Shallow Tunnels in Strain Softening Media   总被引：11，自引：0，他引：11  

D. Sterpi  A. Cividini 《Rock Mechanics and Rock Engineering》2004,37(4):277-298

Summary The behaviour up to failure of shallow underground openings is discussed on the basis of some laboratory, small-scale model tests and of finite element simulation. The experimental results are first illustrated. They were obtained from two-dimensional (plane strain) and three-dimensional tunnel models tested under standard gravity conditions. Then, the phenomenon of strain localisation that characterizes the medium surrounding the model tunnels is discussed, recalling two alternative approaches for its numerical interpretation. On this basis, a finite element procedure for strain softening analyses is outlined and applied to the simulation of the tests in both two- and three-dimensional conditions. The comparison between experimental and numerical results leads to some conclusions on the influence of strain localisation on the overall behaviour of shallow tunnels and on the stability of their headings.  相似文献   

Laboratory and case studies of thermal cycling and stored strain on the stability of selected marbles     

John M. Logan 《Environmental Geology》2004,46(3-4):456-467

Studies of marble panels from the exterior of two buildings document the processes leading to bowing of the material. Bowing of panels is most extensive in those areas that are exposed to direct or reflected thermal energy. The thermal anisotropic behavior of calcite results in grain-boundary separation, grain sliding and microfracturing. The resulting loss of strength is one factor leading to bowing. The development of bows further reduces the panel strength as the outer portions elongate by inelastic deformation mechanisms. Laboratory experiments cycling marble samples for over 200 cycles at three temperatures up to 107°C above room conditions show similar strength losses as the natural situation. The second factor contributing to the bowing process is the release of residual elastic strain. The strain is in part stored in the marble from its geologic history, but may also be accumulated during thermal cycling due to the properties of calcite. Marble panels have been found to bow when stored outside, but not attached to any framework, indicating that the release of residual strain is a critical factor in producing the bows.  相似文献   

Active faulting at the Eurasian, North American and Pacific plates junction     

Andrei I. Kozhurin   《Tectonophysics》2004,380(3-4):273-285

The active faults known and inferred in the area where the major Pacific, North American and Eurasian plates come together group into two belts. One of them comprises the faults striking roughly parallel to the Pacific ocean margin. The extreme members of the belt are the longitudinal faults of islands arcs, in its oceanic flank, and the faults along the continental margins of marginal seas, in its continental flank. The available data show that all these faults move with some strike-slip component, which is always right-lateral. We suggest that characteristic right-lateral, either partially or dominantly, kinematics of the fault movements has its source in oblique convergence of the Pacific plate with continental Eurasian and North American plates. The second belt of active faults transverses the extreme northeast Asia as a continental extension of the active mid-Arctic spreading ridge. The two active fault belts do not cross but come close to each other at the northern margin of the Sea of Okhotsk marking thus the point where the Pacific, North American and Eurasian plates meet.  相似文献