招平断裂带南段南墅金矿地质特征及成矿远景          下载免费PDF全文

王青  程东江  曹瑞  王汝杰  王帅  苏旭亮 《山东国土资源》2018,34(7)

南墅金矿床位于胶西北著名金矿成矿带——招平断裂带的南段,南北与下庄、山后金矿相邻,NW向断裂与招平断裂带在矿区北部交会,成矿条件十分优越。近年来青岛地质工程勘察院在该区勘查取得了新进展,在矿床深部新发现一个产状稳定金矿体,最大埋深约700m,探获金矿资源量规模达到中型,沿走向、倾向均未封闭,进一步勘查资源潜力较大。该文详细叙述了矿床地质特征,总结了矿体产出及矿化富集规律,分析了南墅金矿的成矿远景,提出了该区及招平断裂带南段金矿勘查的找矿建议。  相似文献   

江汉盆地典型二级构造带特征分析     

卢圣力  赵江  王秋良 《大地测量与地球动力学》2019,39(3):226-230

在三维地震资料的基础上，依据构造带划分原则，把江汉盆地构造带划分为三大类，分别为断裂、盐构造及古潜山，共25个，并分别在3个类别中选取一个典型构造带进行讨论研究。  相似文献   

郯庐断裂带苏皖段重力变化的多尺度分解与构造活动分析     

林承灏  黎哲君  徐如刚  袁泉 《大地测量与地球动力学》2019,39(9):884-889

基于多期绝对重力与相对重力联测资料，获取不同时空尺度的郯庐断裂带苏皖段及周边地区重力场动态变化，采用小波多尺度分解方法计算不同深度的重力变化，结合区域地质构造，从深度层次的横向变化与时间尺度的纵向变化2个方面进行分析。结果表明，研究区重力变化主要由中、上地壳密度变化或断裂构造活动引起。沿郯庐断裂带苏皖段走向断裂活动分布不均，受周边深大断裂带交切作用的影响表现出明显的分段活动特征。淮阴-响水口断裂、滁河断裂等深大活动断裂带构造活动对局部重力变化具有一定的控制作用，沿断裂带走向分布有明显的重力变化梯度带；郯庐断裂带郯城-泗县段、大别山构造带霍山-六安及江苏溧阳-镇江地区在小波细节动态变化中存在重力变化梯度带异常区，但强度不高，考虑到多条深大断裂交切于此，后期需要重点关注。  相似文献   

珠江三角洲地区活动断裂探查方法浅析          下载免费PDF全文

黄孝波  孙社良  屈尚侠 《山东国土资源》2019,35(9)

活动断裂是指晚第四纪以来活动过的断裂,它威胁到人类生命财产安全。该文通过文献调研,结合珠江三角洲基底断裂探查研究项目的实际工作,介绍了地面地质调查、浅层地震、断层气测量、钻探及连孔剖面、断裂物质测年、历史地震分析等活动断裂探查方法,以及这些方法的优缺点,并指出了目前活动断裂探查存在的一些问题,提出了建议。  相似文献   

Tectonic inversion assessed by integration of geological and geophysical data: The intracontinental Rio do Peixe Basin,NE Brazil     

David L. Vasconcelos  Fernando O. Marques  Francisco C. C. Nogueira  Yoe A. R. Perez  Francisco H. R. Bezerra  Rmulo C. Stohler  Jorge A. B. Souza 《Basin Research》2021,33(1):705-728

Common basin models assume that the post‐rift tectonic evolution of most basins is usually associated with tectonic quiescence. However, tectonic inversion during the post‐rift phase has been proposed for several sedimentary basins worldwide, but how and why it happens is still a matter of debate, especially in intracontinental settings where the lithosphere is old and thick. Here, we use geological and geophysical data from the Rio do Peixe Basin in NE Brazil to show evidence that intracontinental sedimentary basins can be tectonically inverted by far‐field compressive stresses acting on pre‐existing weakness zones of lithospheric‐scale where stresses can concentrate and inversion can occur. Geomorphological and field data combined with seismic reflection, gravimetric and borehole data show that: (a) inversion occurred along two main Precambrian lithospheric‐scale shear zones, the Patos (E‐W trending) and Portalegre (NE‐SW trending), which had already been reactivated as basin‐bounding faults during the earlier rift stage; (b) post‐rift reactivation affected (mostly) the original master normal faults with the largest rift displacements, and locally produced new reverse faults; (c) during contraction, deformation was partitioned between fault reactivation and buckling of the incompetent sediment pushed against the hard basement; (d) all these signs of inversion have been observed in the field and can be demonstrated on seismic reflection profiles; and (e) combined gravimetric and seismic data show that the main structures of the basin were followed by an inversion. These data are consistent with the operation of WSW‐ENE horizontal maximum compressive stress as a result of combined pushes of the Mid‐Atlantic Ridge (towards the W) and the Andes (towards the E), responsible for the post‐rift oblique inversion of normal faults inherited from the rift phase and formed with vertical maximum compressive stress.  相似文献   

Palaeoseismic records in lacustrine sediments—A case study of the Daqingshan piedmont fault and Hasuhai Lake in Inner Mongolia,China     

Junyi Wang  Zhongtai He  Linlin Li 《Basin Research》2021,33(1):681-704

As a traditional method for palaeoseismic studies, trenching can be combined with dating techniques to identify palaeoseismic events and the earthquake recurrence interval. However, when using trenches to study palaeoearthquakes, factors such as the active tectonic background of the earthquake‐caused structure, the lithology on both sides of the fault, the geomorphology location and type and the samples and methods for dating will affect the location of the trench. Thus, trenches should be carefully selected and used to identify the impact of ancient earthquakes. The results have substantial uncertainties and limitations. In recent years, scholars have made considerable progress in using other methods to reveal the palaeoseismic information of faults. Moreover, the history of fault activity may have been recorded in the lacustrine sediment adjacent to the fault. Hasuhai Lake is adjacent to the middle segment of the Daqingshan piedmont fault in Inner Mongolia. Since the Holocene, the region has experienced a temperate continental semi‐arid climate with little interference, and Hasuhai Lake and peripheral waters present weak hydrodynamic conditions that provide an ideal location for the study of palaeoseismic records in lacustrine sediments. Sediment samples and samples for dating were collected from three trenches excavated on the periphery of the Hasuhai Lake. Their variations in grain size and magnetic susceptibility revealed that wind and flowing water jointly produced the sedimentary conditions of Hasuhai sediments. The ¹⁴C dating results and variations in the grain size distribution, grain size components and magnetic susceptibility of sediments caused by seismic events obtained in this study were compared with those caused by a series of palaeoseismic events at the middle segment of the Daqingshan piedmont fault reported by previous studies using trenches, knickpoints and palaeosol records. The results identified seven palaeoseismic events recorded near Hasuhai Lake since 12,000 years. The combined use of lacustrine sediment variation characteristics and dating techniques is an effective method for studying palaeoseismic events.  相似文献   

断裂静止期有无输导油气能力的判别方法   总被引：3，自引：0，他引：3  

付广  王国民  黄劲松 《沉积学报》2008,26(5):850-856

通过断裂内部结构及输导通道特征研究,得到断裂静止期输导油气通道主要是碎裂岩的连通孔隙,其是否具有输导油气能力主要取决于碎裂岩颗粒粒度、泥质含量和断裂倾角大小。在此基础上,利用物理模拟实验模拟了油气在浮力作用下沿断裂碎裂岩运移速度与碎裂岩颗粒粒度、泥质含量和断裂倾角之间的关系。利用此关系建立了一套断裂静止期有无输导油气能力的判别方法,即运移速度大于零,断裂具输导油气能力,反之则无。并将其应用于海拉尔盆地苏仁诺尔断裂静止期在各组地层中有无输导油气能力的判别中,其结果与地下油气分布情况相符,表明该方法定量判别断裂静止期有无输导油气能力是可行的。  相似文献   

基于鲁棒自适应策略的燃气轮机系统控制器设计     

谭雪琴  苏晓杰 《南京气象学院学报》2018,10(2):166-172

太阳能、风能和潮汐能等可再生能源的发电系统,具有间歇性发电的特性.因此,具有快速响应、发电效率高的燃气轮机发电系统,能够在可再生能源发电间歇出现时充当替代系统,不仅稳固电网的负荷能力,还有助于推动可再生能源的发展.由于燃气轮机是一个模型包含未知的复杂非线性系统,目前针对转速环节主要采取传统PID控制技术.然而,实际运行中系统工况发生变化时,控制器参数不能随着这些变化做出相应的调整,使得控制效果欠佳,执行器故障的出现也可能导致系统无法正常工作.因而,本文针对单轴燃气轮机的孤岛发电模式,结合燃气轮机系统特性,基于反步法的设计思路,引入不依赖于系统模型的鲁棒自适应控制策略,并加入容错控制和Nussbaum函数构造转速控制器.在控制器设计过程中融合动态面方法,解决高阶系统中反步法引起的计算爆炸问题.最后,通过仿真,验证了控制器的可靠性.  相似文献   

CINRAD/SA(B)发射机触发器芯片级故障诊断流程     

潘新民  尹春光  崔炳俭  弓宇恒 《气象科技》2018,46(3):443-449

发射机触发放大器主要为调制器中SCR开关管提供放电触发脉冲,同时兼具调制组件的保护功能。发射机触发器芯片级故障诊断流程将触发器故障定位到芯片级,大大降低了触发器故障维修成本,同时为雷达测试平台中触发器故障自动诊断建模提供了技术支持。在发射机触发器信号流程基础上,依据发射机触发器关键点波形或关键点电平,通过触发器故障树图了解故障因果关系,研究出规范化的触发器芯片级故障诊断流程。列举了依据触发器芯片级故障诊断流程,修复了由于单稳态触发器无触发信号输出,导致无-200V放电触发信号的单稳态触发器故障个例。结果表明:芯片级触发器故障诊断流程可以快速定位发射机触发器故障点到最小可更换芯片。具有操作方法简洁、诊断思路清晰、操作规范,基层雷达站技术人员容易掌握的特点,可有效提高新一代天气雷达技术保障水平,保证雷达观测数据的可靠性。  相似文献   

CINRAD/SA(B)发射机激励放大器芯片级故障诊断流程     

潘新民  白水成  崔炳俭 《气象与环境科学》2017,40(3):119-124

激励放大器是发射机射频放大链电路前级功率放大器,对雷达探测资料可靠性具有重要作用。研究芯片级故障诊断流程,一方面可以解决台站技术保障人员无法故障定位到芯片级的技术难题;另一方面,芯片级故障维修可达到大大降低维修成本的目的。雷达故障一般分为参数调整不当导致性能下降故障和器件损坏造成参数异常故障。为此,通过总结出CINRAD/SA(B)发射机激励放大器信号流程、故障树图集,在依据同步信号时序关系及关键点波形参数基础上,研究出规范化的激励放大器调试技术和方法,以及激励放大器芯片级故障诊断定位流程,并列举了依据激励放大器芯片级故障诊断定位流程,修复激励放大器集成块N8损坏,导致+8 V电源不正常,造成激励放大器无功率输出,以及激励放大器的第二级功放模块故障导致激励放大器输出功率低的两个故障的典型个例,以检验维修效果。实际应用结果表明:芯片级激励放大器故障诊断定位流程可以快速定位发射机激励放大器故障点到故障器件,方法简洁、思路清晰、操作规范,基层雷达站技术人员容易掌握;激励放大器调试技术和方法,能解决激励放大器参数调整不当导致激励放大器性能下降故障,可有效提高新一代天气雷达技术保障水平。  相似文献