四川省九龙县娃娃沟泥石流运动特征与堵河成灾机制分析     

施蕾蕾  陈宁生  杨成林 《中国地质灾害与防治学报》2008,19(2):16-22

2006年7月16日娃娃沟流域暴发的大规模泥石流,给下游3个电站造成巨大经济损失,是大渡河流域一次典型的灾害性泥石流。分析得出,娃娃沟泥石流重度高、搬运能力强,泥石流固体物质砂、石混杂,粗大砾石含量高;暴发频率低、规模大,流速及峰值流量分别高达10．78m／s及798．5m^3／s;在汇口处,泥石流堆积物堵塞河道是引起下游电站受灾的重要原因,高重度、粗颗粒、大流量的组合是此次泥石流堵江的重要原因。堵河判别计算结果显示在发生百年一遇泥石流时,该断面均有发生堵河的可能。娃娃沟泥石流表明：①在大渡河支流的泥石流沟周边的中小电站极有可能在泥石流暴发时受到破坏。因此,电站建设过程中应加强对周边泥石流沟的防灾减灾工作;②虽然娃娃沟流域植被良好,但仍然发生了大规模泥石流。表明植被不能完全避免泥石流的发生,对于此类泥石流沟不能疏忽大意。  相似文献   

斜坡非饱和带低渗透岩石结构体风化前锋扩展过程   总被引：2，自引：0，他引：2  

徐则民 《地学前缘》2008,15(4):258-268

非饱和带低渗透岩石结构体风化前锋扩展是斜坡灾害孕育过程中的关键环节之一。到目前为止,化学风化领域的研究成果主要集中在高水-岩比的饱和环境下单矿物及矿物成分单一的碳酸盐岩的风化动力学方面,非饱和环境下的岩石风化研究还主要限于风化产物的特性描述方面。斜坡非饱和带低渗透岩石结构体风化前锋扩展是一种高度复杂的THMC过程。由于在溶解对象、溶解液及溶解过程的水动力-水化学环境等方面存在的显著差异,既有的地质材料风化动力学成果为探索这一复杂过程提供了理论储备,但还不能阐明其核心机理。斜坡非饱和带低渗透岩石结构体风化前锋的扩展过程研究不仅可以加深人们对斜坡灾害孕育的理解,为灾害预报-预警及其控制提供理论依据,同时可以促进岩石-岩体力学及浅表生水文地球化学等相关学科的交叉与发展。  相似文献   

黑龙江省东部桦南隆起美作花岗岩的锆石U-Pb定年及其地质意义   总被引：9，自引：0，他引：9  

黄映聪  任东辉  张兴洲  熊小松  张春艳  王跃  赵亮亮 《吉林大学学报(地球科学版)》2008,38(4)

为查明马家街群发生接触变质作用的时代及其构造背景,对出露于黑龙江省东部桦南隆起的美作花岗岩体进行了锆石LA-ICP-MS U-Pb定年研究.结果显示:锆石具有清晰的生长振荡环带,其Th/U比值为0.12～1.04,属于典型的岩浆成因锆石;获得的206Pb/238U加权平均年龄为(259.0±3.6) Ma(n=14,MSWD=5.9),代表了岩体结晶年龄.美作岩体与佳木斯地块南部的青山、楚山和柴河岩体形成时代一致,其轻稀土富集、重稀土亏损型式和Eu负异常以及明显的Nb、Ta、Sr、Ti亏损的特点显示为壳源成因的火山弧花岗岩;它们的形成可能与晚古生代古亚洲洋的消减作用有关,该期花岗岩的就位导致马家街群发生了接触变质作用.美作花岗岩体形成时代的厘定,不仅限定了马家街群的变质时代为晚二叠世,同时为进一步探讨佳木斯地块晚古生代构造演化提供了新证据.  相似文献   

抚顺煤层气赋存特征及资源评价研究     

郭震  裴炳浩 《中国煤炭地质》2008,20(5):26-28

抚顺矿区城市下压煤面积6km^2,煤炭储量23901．5万t。通过对矿区地质特征、煤储层特征分析．认为区内煤层气含量高（9．81～24．53m^3／t）,煤层中大空隙多,透气性好,渗透率较高（0．24～3．60mD）。煤层直接顶板为厚100m左右的致密油页岩,底板为泥岩、凝灰岩,具有良好的封闭条件。根据矿区多年测试资料,采用容积法得出区内煤层气资源量为30．53亿m^3。综合开发煤层气资源符合东北老矿区的实际,其将为复苏东北重工业基地提供有效的洁净能源。  相似文献   

青藏高原东部及邻区地块现今运动特征     

《成都理工学院学报》2008,35(1):81-86

  相似文献   

A Block-Based Theoretical Model Suited to Gravitational Sliding     

Tinti  Stefano  Bortolucci  Elisabetta  Vannini  Cesare 《Natural Hazards》1997,16(1):1-28

An original theoretical model has been devised to simulate mass flow over hill slopes due to gravitational sliding. The sliding mass is discretized into a sequence of contiguous blocks which are subjected to gravitational forces, to bottom friction and to surface resistance stresses that are generally negligible for subaerial flows, but are relevant for submarine slides. The blocks interact with each other while sliding down the hill flanks because of internal forces that dissipate mechanical energy and produce a momentum exchange between the individual blocks, yet conserving the total momentum of the mass. Internal forces are expressed in terms of interaction coefficients depending on the instantaneous distance between the block centers of mass, which is a measure of the deformation experienced by the blocks: the functional dependence includes three parameters, namely the interaction intensity ¯, the deformability parameter and the shape parameter , by means of which a wide range of interaction types can be fully accounted for. The time integration is performed numerically by solving the equations for the block velocities and positions at any time ti by means of the block accelerations at the previous time t_i-1, and by subsequently updating the block accelerations, which allows to proceed iteratively to the following times. The model has been tested against laboratory results available from literature and by means of several numerical experiments involving a simplified geometry both for the sliding body and the basal surface, with the purpose of clarifying the influence of the model parameters on the slide dynamics. The model improves the performance of the existing kinematic models for slides, moreover preserving an equivalent numerical simplicity. Future applications and possible improvements of this model are suggested.  相似文献   

On　the　physical　model　of　earthquake　precursor　fields　and　the　mechanism　of　precursors＇timespace　distribution──origin　and　evidences　of　the　strong　body　earthquake──generating　model     

梅世蓉 《地震学报(英文版)》1995,(3)

Ｏｎｔｈｅｐｈｙｓｉｃａｌｍｏｄｅｌｏｆｅａｒｔｈｑｕａｋｅｐｒｅｃｕｒｓｏｒｆｉｅｌｄｓａｎｄｔｈｅｍｅｃｈａｎｉｓｍｏｆｐｒｅｃｕｒｓｏｒｓ＇ｔｉｍｅｓｐａｃｅｄｉｓｔｒｉｂｕｔｉｏｎ──ｏｒｉｇｉｎａｎｄｅｖｉｄｅｎｃｅｓｏｆ　ｔｈｅｓｔｒｏｎ...  相似文献   

Spinel–sapphirine–quartz bearing composite inclusion within garnet from an ultrahigh-temperature pelitic granulite: Implications for metamorphic history and P–T path     

Toshiaki Tsunogae  M. Santosh 《Lithos》2006,92(3-4):524-536

We report here a multiphase mineral inclusion composed of quartz, plagioclase, K-feldspar, sapphirine, spinel, orthopyroxene, and biotite, in porphyroblastic garnet within a pelitic granulite from Rajapalaiyam in the Madurai Granulite Block, southern India. In this unique textural association, hitherto unreported in previous studies, sapphirine shows four occurrences: (1) as anhedral mineral between spinel and quartz (Spr-1), (2) subhedral to euhedral needles mantled by quartz (Spr-2), (3) subhedral to anhedral mineral in orthopyroxene, and (4) isolated inclusion with quartz (Spr-4). Spr-1, Spr-2, and Spr-4 show direct grain contact with quartz, providing evidence for ultrahigh-temperature (UHT) metamorphism at temperatures exceeding 1000 °C. Associated orthopyroxene shows high Mg/(Fe + Mg) ratio ( 0.75) and Al₂O₃ content (up to 9.6 wt.%), also suggesting T > 1050 °C and P > 10 kbar during peak metamorphism.

Coarse spinel (Spl-1) with irregular grain morphology and adjacent quartz grains are separated by thin films of Spr-1 and K-feldspar, suggesting that Spl-1 and quartz were in equilibrium before the stability of Spr-1 + quartz. This texture implies that the P–T conditions of the rock shifted from the stability field of spinel + quartz to sapphirine + quartz. Petrogenetic grid considerations based on available data from the FMAS system favour exhumation along a counterclockwise P–T trajectory. The irregular shape of the inclusion and chemistry of the inclusion minerals are markedly different from the matrix phases suggesting the possibility that the inclusion minerals could have equilibrated from cordierite-bearing silicate-melt pockets during the garnet growth at extreme UHT conditions.  相似文献   

一种实现依比例街区自动合并的算法     

朱蕊  周滨  邰茜 《测绘学院学报》2005,22(1):58-61

针对依比例街区的图形特征，介绍了一种实现街区自动合并的有效算法，即利用数学形态学和模式识别对栅格数据进行追踪，然后提取街区轮廓线，编辑后就得到最终合并的街区。  相似文献   

大别山造山带前陆深地震反射剖面   总被引：18，自引：0，他引：18       下载免费PDF全文

董树文 高锐李秋生  刘晓春钱桂华黄东定  匡朝阳李三忠管烨  白金贺日政  李朋武 《地质学报》2005,79(5):595-601

在大别山南部和扬子地块前陆实施的深地震反射剖面(140 km)揭示出大别山造山带前陆地壳的精细结构。总体北倾的地壳内部结构与向北缓倾的叠瓦状莫霍面反射揭示出扬子陆块向北俯冲的行迹。莫霍面向北插入大别山造山带下与南大别山地壳内南倾反射震相叠置,构成交叉反射图像,刻画出扬子前陆与大别山造山带的碰撞构造面貌。  相似文献