恩洪-老厂地区煤层气成藏条件研究     

桂宝林 《云南地质》2004,23(4):421-433

煤层气盆地、煤层气系统、煤层气区带的存在及发育程度是煤层气藏形成的充分与必要条件。恩洪盆地和老厂一圭山盆地老厂煤矿区具备了形成煤层气藏的条件。研究其形成煤层气藏的特定条件，总结其煤层气藏模式，是煤层气勘探目标评价的基础。  相似文献   

疏降地下水引起地面塌陷浅析--以淮南煤矿区为例   总被引：4，自引：0，他引：4  

许光泉  沈慧珍 《中国地质灾害与防治学报》2004,15(4):64-68

以淮南西部矿区为例，介绍了该地区自20世纪60年代开采煤矿以来，由于疏降地下水，引起的地面塌陷。为了研究灰岩水动力场规律，先后在该区进行多时段、多水平放水试验。研究表明，覆盖粘土层、岩溶及人工疏降地下水，是该地区岩溶塌陷形成的基本条件。通过对粘土盖层性质、疏降地下水岩溶塌陷演化过程及塌陷机理与对应阶段过程综合分析，结合区域地质条件，掌握了塌陷点的分布规律。对目前西部地区塌陷“复活”、整治及未来城市规划，提出了建设性建议。  相似文献   

Geological controls on rock mass classification of coal from Huntly East Mine, New Zealand     

Vicki Moon  Trisha Roy 《Engineering Geology》2004,75(2):201-213

Rock Mass Rating (RMR) measurements from 65 sites within Huntly East underground coal mine are presented. All measurements are in coal, for which the dominant discontinuities are vertical cleat. Basic RMR values using two discontinuity spacings are presented: overall RMR based on the average spacing of all individual discontinuities; and cleat zone RMR based on the average spacing between zones of cleat. Cleat orientations are highly variable, but on average approximately parallel horizontal stress axes (face cleat follows maximum horizontal stress axis, butt cleat follows minimum horizontal stress axis).Contours of RMR variations throughout the mine are used to compare rock mass conditions with geological structure. It is apparent that: (1) RMR is least within downthrown fault blocks, and particularly immediately on the downthrown sides of faults, and greatest in upthrown fault blocks; and (2) RMR contours parallel horizontal stress axes within fault-bounded blocks, and bend to parallel faults at block boundaries. From similar contours for parameters contributing to RMR, the Rock Quality Designation (RQD), groundwater rating, and discontinuity condition rating create most of the observed variations in RMR. RQD is determined from the measured discontinuity frequency and hence is a measure of the degree of fracturing of the rock mass. This is interpreted as influencing the groundwater and condition parameters directly by allowing greater water ingress. Discontinuity frequency is greatest (least spacing) in the immediate vicinity of faults, and in downthrown fault blocks, generating low RMR values. Within fault blocks RQD varies little, so RMR contours align with cleat orientations.As RMR contours, faults, stress field and cleat orientation are clearly interrelated, there is unequivocally a connection between RMR and structural geology; this allows some predictive capacity in terms of ground conditions. If geological features can be accurately defined through either drilling programs or seismic surveys, then ground conditions may be predicted before panels are driven.  相似文献   

Analysis of Sediments and Soils by X-Ray Fluorescence Spectrometry Using Matrix Corrections Based on Fundamental Parameters   总被引：2，自引：0，他引：2  

Jacinta Enzweiler  Maria Aparecida Vendemiatto 《Geostandards and Geoanalytical Research》2004,28(1):103-112

Wavelength dispersive X-ray fluorescence spectrometry (WD-XRF) is widely used for the analysis of soils and sediments using well characterised procedures. However, difficulties can occur with samples such as unknowns containing small amounts of ore materials and samples collected from contaminated sites where trace elemental concentrations can exceed the concentration range for routine analysis. We studied the performance of a commercially available method, based on fundamental parameters (FP) to correct matrix effects. The spectrometer was originally calibrated with elemental or simple compound calibrants. Samples were analysed as pressed powder pellets. Eighteen sediment and soil reference materials, three of them with certified values for some of their constituents, were used to evaluate accuracy, by comparing results with recommended values and their standard deviations (RV ± 2s) or certified values and their confidence intervals (CV ± Cl). When results fell systematically outside these intervals, calibrations were refined with geochemical reference materials. The best agreement of results with recommended and certified values was obtained when the contents of H₂O and C in each sample were included as matrix constituents during calculations. The detection limits of trace elements tended to be relatively high, because the measuring conditions employed were not maximised for sensitivity. The main advantage of the method tested was that it enabled the analysis of samples with high concentrations of trace elements and the determination of elements such as F, Bi, Sb and W, which are not commonly included in quantitative XRF analysis of geological samples.  相似文献   

From in-situ coal to fly ash: a study of coal mines and power plants from Indiana     

Maria Mastalerz  James C Hower  Agnieszka Drobniak  Sarah M Mardon  Grzegorz Lis   《International Journal of Coal Geology》2004,59(3-4):171-192

This paper presents data on the properties of coal and fly ash from two coal mines and two power plants that burn single-source coal from two mines in Indiana. One mine is in the low-sulfur (<1%) Danville Coal Member of the Dugger Formation (Pennsylvanian) and the other mines the high-sulfur (>5%) Springfield Coal Member of the Petersburg Formation (Pennsylvanian). Both seams have comparable ash contents (11%). Coals sampled at the mines (both raw and washed fractions) were analyzed for proximate/ultimate/sulfur forms/heating value, major oxides, trace elements and petrographic composition. The properties of fly ash from these coals reflect the properties of the feed coal, as well as local combustion and post-combustion conditions. Sulfur and spinel content, and As, Pb and Zn concentrations of the fly ash are the parameters that most closely reflect the properties of the source coal.  相似文献   

Modes of occurrence of mercury and other trace elements in coals from the warrior field, Black Warrior Basin, Northwestern Alabama   总被引：1，自引：0，他引：1  

S.F Diehl  M.B Goldhaber  J.R Hatch   《International Journal of Coal Geology》2004,59(3-4):193-208

The mineralogic residence and abundance of trace metals is an important environmental issue. Data from the USGS coal quality database show that potentially toxic elements, including Hg, As, Mo, Se, Cu, and Tl are enriched in a subset of coal samples in the Black Warrior Basin of Alabama, USA. Although the coal as-mined typically is low in these elements, localized enrichments occur in high-pyrite coals and near faults. Microscopic analyses demonstrate that the residence of these elements is dominantly in a late-stage pyrite associated with structurally disrupted coal. Further, our data suggest addition of Hg to the coal matrix as well. The source of these trace elements was hydrothermal fluids driven into the Black Warrior Basin by Alleghanian age tectonism.  相似文献   

Geological investigations at a high altitude, remote coal mine on the Northwest Pakistan and Afghanistan frontier, Karakoram Himalaya     

Laurance J. Donnelly 《International Journal of Coal Geology》2004,60(2-4):117-150

The Northwest Pakistan and Afghanistan frontier is located one of the most remote, inaccessible, and inhospitable part of the Himalayan orogenic belt. In this region, two of the world's largest and most distinct mountain belts intersect; the Karakoram Himalaya (mainly in Pakistan) and the Hindu Kush (mainly in Afghanistan). Located at high altitude, in a remote part of Northwest Pakistan, close to the border with Afghanistan, tribal villagers began excavating a series of adits into the steep mountain slopes, beneath glaciers, to extract valuable coal and carbonaceous shale resources. These were discovered in 1996, by the villagers, whilst hunting, and may represent some of the highest mine workings in the world. Small-scale mining operations subsequently developed using rudimentary mining methods and the mine became known as the Reshit or Pamir Coal Mine.The coal deposits are sedimentary, highly disturbed and tectonised, having been subjected to multiple phases of orogenic crustal deformation. The coal occurs as discrete lenses, several tens of metres in their lateral dimension, between steeply dipping, overturned and thrusted limestone beds of Jurassic age. The coal provided a vital, alternative source of fuel for the villagers since the local, traditional fuel supply was wood, which had become severely depleted, and imports of kerosene from neighbouring China and Afghanistan were too expensive.The mining operations experienced severe problems. These included several collapses of mine entrances, the failure of the adits to intersect the coal-bearing zones, the potential threat of geological hazards, mining-induced hazards and harsh high-altitude operating conditions, particularly during the winter months. International aid was provided to assist the villagers and a geological investigation was commissioned to investigate the problems at the mine.The geology of Karakoram Himalaya is relatively poorly understood. Until recently the region was restricted to foreign visitors and large areas of this mountain belt are virtually unmapped. Existing geological and topographic maps are difficult to obtain or are unavailable due to the close proximity of political frontiers, national borders and security reasons. The mineral resource potential of this region is virtually unknown. Few western geologists have visited this area due to its inaccessibility and political constraints, being situated close the frontiers with China, Afghanistan, and the disputed Pakistan and India territory of Kashmir.The Pakistan and Afghanistan border, is once again, now closed to foreign visitors. The objectives of this paper are to document the occurrence of coal and carbonaceous shale, at high altitude, in the Karakoram Himalaya and to provide details on the geology, geological hazards, reserves and labour-intensive mining operations. These observations and information may provide the basis for future mineral exploration, mining-geology, mining-engineering, feasibility studies and engineering geological investigation in the Karakoram Himalaya.  相似文献   

Triaxial stress state deep in orogenic belts: an example from Turkey     

T. Masuda  S. Nakayama  N. Kimura  K. Onodera  A. Okamoto 《Journal of Structural Geology》2004,26(12):2203-2209

A rare metachert pebble containing amphibole grains with microboudin structures in a wide range of orientations provides an opportunity to perform stress analysis in two orthogonal orientations on the foliation surface. The sample was analysed by the microboudin method to infer the triaxial stress state during microboudinage. Stress parameters proportional to the far-field differential stress were determined for sodic amphibole grains in the two orientations. The ratio of the stresses in the two orthogonal orientations (σ₁−σ₂)/(σ₁−σ₃) was calculated to be 0.64, indicating that σ₂ lies closer to the midpoint between σ₁ and σ₃ than to σ₃.  相似文献   

适用于大旋转角的三维基准转换的一种简便模型   总被引：33，自引：0，他引：33  

陈义  沈云中  刘大杰 《武汉大学学报(信息科学版)》2004,29(12):1101-1105

基于大角度的空间直角坐标转换，提出了以方向余弦为参数、适用于任何角度旋转的空间直角坐标转换的简明计算方法。  相似文献   

石墨炉原子吸收光谱法测定土壤样品中镉   总被引：5，自引：0，他引：5  

卞莉  曹萍 《吉林地质》2005,24(2):115-117

采用磷酸氢二铵作基体改进剂塞曼扣背景石墨炉原子吸收光谱法测定土壤样品中镉，方法检出限DL=0．012μg／g，精密度RSD在3．55％～7．33％，满足了土壤样品中镉测定的镉质量要求。  相似文献