排序方式： 共有146条查询结果，搜索用时 31 毫秒
11.
西藏多龙矿集区荣那铜金矿床蚀变矿物学和地球化学及找矿意义 总被引：1，自引：0，他引：1
位于西藏多龙矿集区的荣那铜金矿床是班公湖-怒江成矿带首例斑岩型-浅成低温热液型矿床,它的发现对于班公湖-怒江成矿带找矿模型的构建以及资源潜力评估有着重要意义。本文以荣那矿床ZK3204岩芯钻孔为研究对象,针对其蚀变矿物,运用短波红外光谱测试技术,并结合金属矿物组合以及黄铁矿LA-ICP-MS原位微量元素特征,以期查明其矿床成因,并为深部资源勘查提供理论依据。短波红外光谱测试显示出ZK3204钻孔蚀变矿物垂向分带组合为:高岭石+(地开石)→高岭石+伊利石→高岭石+(地开石+石膏)→高岭石+绢云母+伊利石→高岭石+伊利石+(叶腊石)+(地开石),金属矿物也从Cu-S体系逐渐转变为Cu-Fe-S体系。通过黄铁矿LA-ICP-MS原位微量元素分析发现,黄铁矿可分为四类,分别对应荣那矿床四个成矿阶段:(1) Py I:Co、Ni、Cu、Ag、Au含量较低,Co/Ni显示为沉积成因,代表成岩期黄铁矿;(2) PyⅡ:Co、Ni含量较低,Cu、Ag、Au含量较高,Co/Ni显示为沉积成因,代表第一期斑岩型矿床成矿期黄铁矿;(3) PyⅢ:Co含量较低,Ni、Cu、Ag、Au含量较高,Co/Ni显示为沉积成因,代表第二期斑岩型矿床成矿期黄铁矿;(4) PyⅣ:Cu、Ag、Au含量较低,Co、Ni含量较高,Co/Ni显示为热液成因,代表浅成低温热液矿床成矿期黄铁矿。风化作用也是荣那矿床重要地质过程,贯穿于各成矿阶段,反映为早白垩世班公湖-怒江洋盆向北俯冲消减大背景下的多龙矿集区隆升事件,导致矿床被大量剥蚀,也使黄铁矿显示沉积成因。荣那矿床目前仍有较大找矿潜力,在钻孔深部(815m以下),黄铁矿Cu、Ag、Au含量,钻孔中Cu、Pb、Zn、Cr、Hg等含量,绢云母、伊利石含量以及铜金矿的矿石品位均有向下升高的趋势,说明在ZK3204钻孔下部仍有巨大的找矿潜力,可作为未来深部资源探测的重点对象。 相似文献
12.
13.
鄂东鸡冠嘴矿区成矿岩体锆石SHRIMP U-Pb定年及其意义 总被引：5，自引：0，他引：5
鄂东鸡冠嘴铜金(铁)矿床位于阳新岩体西北端,与铜绿山铜金矿床毗邻。矿区成矿岩体主要岩性为石英正长闪长玢岩、石英闪长岩、闪长岩和安山玢岩。其中石英正长闪长玢岩与成矿关系密切。在前人矿床地质特征研究基础上,笔者对成矿岩体进行了锆石SHRIMP U-Pb定年,获得石英正长闪长玢岩和闪长岩的年龄为146±2Ma(95%可信度,MSWD=1.3)和132±4Ma(95%可信度,MSWD=3)。测定结果表明,区内石英正长闪长玢岩和闪长岩分属燕山早期和燕山晚期岩浆活动的产物。鉴于矿体在空间上主要赋存于岩体内外接触带及层间破碎带中,推测成矿作用应略晚于石英正长闪长玢岩(146±2Ma)而早于闪长岩侵位的时间(132±4Ma),这与前人获得长江中下游铜铁金成矿带代表性矿床的辉钼矿Re-Os模式年龄分布在134.7～143Ma的研究结果一致。 相似文献
14.
SD法在湖北大冶鸡冠嘴铜金矿床资源储量核实中的应用 总被引：4，自引：0，他引：4
SD法是一种全新的储量计算和审定方法,是我国使用的三大储量计算方法(传统法、克里格法和SD法)之一.根据国土资源部的指示和要求,湖北三鑫金铜股份有限公司和北京恩地科技发展有限责任公司共同对矿区的13条勘探线、20个矿体、16个中段的资源储量运用SD法进行了全面的复核计算,成功地确定了鸡冠嘴铜金矿矿床-160～-170 m、-170～-470 m、-470 m以下铜和金的保有储量. 相似文献
15.
汉南地区晋宁晚期铜-金成矿事件的确认及意义 总被引：1，自引：0，他引：1
汉南地区位于扬子克拉通北缘西段。目前,在川、陕两省已在该区发现了数十个矿床(点)。其中,广泛分布的铜-金矿床(点)具有热液型矿化特征,成矿条件有利,具有寻找大-中型矿床的远景。为了查明这些铜-金矿产资源的形成时代,文章运用LA-ICP-MS锆石U-Pb法和单矿物~(40)Ar/~(39)Ar法对汉南地区有代表性的矿床(点)进行了成矿年代学研究。其结果显示,潘坝成矿期热液脉的锆石U-Pb年龄为(744±10)Ma,黑云母和钾长石~(40)Ar/~(39)Ar视年龄介于740 Ma~700 Ma之间。元山寺的成矿期白云母~(40)Ar/~(39)Ar坪年龄为(744±4)Ma,等时线年龄为(748±7)Ma。由于本次测试选择了成矿期矿物,其结果可以代表成矿时代。因此,汉南很可能存在晋宁晚期的铜-金成矿事件。根据区域地质演化历史,笔者认为汉南铜-金矿化(744 Ma)是造山晚期加厚岩石圈下部(山根)拆沉的结果。 相似文献
16.
Ridge subduction and porphyry copper-gold mineralization:An overview 总被引：35，自引：0，他引：35
SUN WeiDong LING MingXing YANG XiaoYong FAN WeiMing DING Xing & LIANG HuaYing CAS Key Laboratory of Isotope Geochronology Geochemistry Guangzhou Institute of Geochemistry Chinese Academy of Sciences Guangzhou China Research Center for Mineral Resources School of Earth Space Sciences University of Science Technology of China Hefei Graduate University of Chinese Academy of Sciences Beijing Key Laboratory for Metallogenic Dynamics ... 《中国科学:地球科学(英文版)》2010,(4)
Many large porphyry Cu-Au deposits are connected to adakitic rocks known to be closely associated with ridge subduction. For example, there are several subducting ridges along the east Pacific margin, e.g., in Chile, Peru, and South America, most of which are associated with large porphyry Cu-Au deposits. In contrast, there are much fewer ridge subductions on the west Pacific margin and porphyry Cu-Au deposits are much less there, both in terms of tonnage and the number of deposits. Given that Cu and Au are... 相似文献
17.
The Batu Hijau deposit is the only porphyry type deposit in production in the Sunda‐Banda arc, Indonesia. This study discusses the reason for the localization of copper grade at the deep part of the deposit based on the observation of opaque mineral assemblage. In addition, the formation condition of quartz veins and opaque minerals is discussed on the basis of the fluid inclusion microthermometry. Samples were selected from drill holes SBD100, SBD168, SBD194, SBD254, and SBD257 to cover the wide vertical range. At the Batu Hijau deposit, quartz veins have been classified mainly into four types called A, B, C and D veins, and the A veins contain mainly bornite, often associated with digenite and chalcocite. In addition, magnetite occurs in A veins. However, at the deep part of the deposit, there are quartz veins associated with magnetite, but few copper sulfides such as bornite and chalcopyrite in quartz veins, as observed in SBD257. Quartz veins at depth in SBD257 have abundant magnetite and pyrite. Pyrite in quartz veins at depth in SBD257 mainly occur at the rim of magnetite grains or interstices between them. In quartz veins in SBD254, there are abundant copper sulfides such as bornite and chalcopyrite in spite of the depth. Bornite and chalcopyrite occur as inclusions in magnetite grains in quartz veins in SBD254. Pyrite which often occurs in low grade zone in quartz veins in SBD254 is also recognized at the rims of copper sulfides. This indicates that pyrite in SBD257 and SBD254 formed later than magnetite. On the other hand, blebs of bornite and chalcopyrite inclusions in magnetite grains, which are recognized in quartz veins in SBD168 at shallow high grade part, suggest that the hydrothermal fluid, from which magnetite was deposited also brought the copper sulfides such as bornite and chalcopyrite to the deep part of the Batu Hijau deposit. Therefore, it is concluded that initially the high grade ore zone extended to depth without localization. However due to the later overprinting hydrothermal activity, copper sulfides and magnetite were replaced or dissolved and pyrite was formed, resulting the low grade zone at the deep part of the deposit. Dissolution temperatures (Td) of halite obtained by from fluid inclusion microthermometry show significant differences between SBD168 and other drill holes. The high Td obtained in SBD168 may indicate larger volume of NaCl crystals in hydrothermal fluid at the time of entrapment of the fluid inclusions and formation of other opaque minerals such as magnetite and copper‐iron sulfides. It suggests that the ratio of vapor to brine is also higher at the shallow part of the deposit. The higher vapor to brine ratio may suggest a higher degree of boiling. Removal of vapor phase separated from brine during boiling increases the concentration of substances dissolved in the brine, and this will result in saturation, as evidenced by the salinity and NaCl saturation. The higher degree of boiling suggested by the higher vapor to brine ratio at shallow part may have increased the copper concentration in the brine that may have lead the saturation, resulted in the deposition of copper‐bearing minerals. 相似文献
18.
西藏革吉县尕尔穷铜金矿床地质特征及其成因意义 总被引：2，自引：0，他引：2
位于西藏阿里地区革吉县的尕尔穷铜金矿床是班公湖-怒江成矿带西段首个达到详查程度的大型铜金矿床。矿区发育三条断裂,其中F1和F2断层呈北东-南西向展布,F3断层为南北向展布。F1断裂产状复杂、延伸大于3000m,破碎带内发育的铜金矿体严格受其控制。目前,矿床主要由斑岩型钼(铜、金)矿体、接触带矽卡岩型铜金矿体、F1断裂破碎带内似IOCG型铁铜金矿体组成。不同矿体特征差别显著,斑岩型矿体主要产于石英闪长岩、花岗斑岩中,金属矿物以网脉状辉钼矿主,次为黄铜矿、磁铁矿、黄铁矿;矿物组合有磁铁矿+黄铁矿、黄铜矿+辉钼矿。矽卡岩型矿体主要产于石英闪长岩、花岗斑岩与碳酸盐岩接触带,呈层状、似层状,金属矿物主要为细脉-网脉状黄铜矿、斑铜矿、辉铜矿、铜蓝、自然铜、自然金、自然银,矿物组合为黄铜矿-磁铁矿-自然金、黄铜矿-斑铜矿-磁铁矿-自然金-银、黄铜矿-赤铁矿-自然金、辉钼矿、黄铜矿-自然金。破碎带内似IOCG型铁铜金矿体产于F1断裂破碎带,呈似层状,金属矿物以细脉-网脉状矿石和角砾状赤铁矿、磁铁矿、黄铜矿、斑铜矿、辉铜矿、铜蓝、自然金为主;矿物组合为黄铜矿-自然金、黄铜矿-斑铜矿-自然金-银矿、赤铁矿-磁铁矿-自然金、黄铜矿-自然金。根据矿床地质特征,综合前人研究资料,本文对矿床的成因进行了进一步探讨,认为尕尔穷铜金矿床是晚白垩世班怒洋关闭后南羌塘-三江复合板片与冈底斯-念青唐古拉板片之间弧-陆碰撞阶段形成的,具有与钾玄岩-高钾钙碱性闪长类岩体、陆-陆同碰撞钾玄岩-高钾钙碱性重熔型花岗斑岩有成因密切联系的构造-岩浆岩"三位一体"的成矿特征,即主矿体赋存于斑岩、矽卡岩、构造破碎带中形成的"斑岩-矽卡岩-似IOCG"型铜金矿床。 相似文献
19.
苏门答腊(印度尼西亚)的火山岩及其地球化学-构造环境判别 总被引：1，自引：0，他引：1
本文介绍了苏门答腊(印度尼西亚)火山岩的时代、分布和产状。根据火山岩的岩石化学资料,应用PetroGraph和Minpet2.0岩浆岩地球化学作图软件对60多个中、新生代火山岩岩石化学分析数据进行处理,并对其地球化学-构造环境判别图解的解释,探讨新生代火山岩盆地及其中生代-古生代基底的火山岩形成构造环境。根据这些判别图,认为苏门答腊新生代火山岩盆地基底为大陆边缘裂谷(初始裂谷),并在渐新世以后转化为大陆边缘火山弧。高钾橄榄玄粗岩系列和埃达克岩与苏门答腊火山岩体系共生,显示该区具有寻找斑岩-低温热液型铜-金矿找矿远景。 相似文献
20.
本文对铜陵舒家店辉石闪长岩开展了年代学和地球化学的系统研究。结果表明,舒家店辉石闪长岩的侵入年龄为140.5±1.4Ma,低于铜陵地区花岗闪长岩年龄。辉石闪长岩是矿床赋矿岩石,据此推测成矿时代也应该同为140.5Ma左右,或稍晚于岩浆岩侵位的时代。舒家店辉石闪长岩的地球化学特征表明其SiO2含量为50%左右,属于稍偏基性的岩类,并且具有大离子亲石元素(LILE:Ba,Sr,Th,Pb)的富集,而相对亏损高场强元素(HFSE:Zr,Nb,Hf),反映出该侵入岩的原始岩浆可能来源于受到了板片俯冲作用改造的富集地幔。舒家店岩体及铜金矿床形成的大地构造背景可能与古太平洋板块俯冲密切相关,位于大陆边缘岩浆弧的内陆一侧环境,它可能是俯冲洋壳部分熔融形成的熔体或流体交代地幔楔并使地幔楔发生部分熔融而形成的玄武质岩浆侵位到地壳浅部过程中混染了大量地壳物质而成。 相似文献