论南岭成矿带大宝山斑岩型铜矿的特殊性及其勘查意义     

赵如意 《地质与勘探》2023,59(4):716-733

广东省大宝山矿床是南岭成矿带唯一的大型铜多金属矿床，此次研究在矿区中南部发现了细脉浸染状铜矿的新类型。为确定其是否为斑岩型铜矿的成因类型，本文在梳理南岭成矿带铜成矿条件和成矿规律的基础上，查明了矿区中南部英安斑岩的蚀变和铜矿化特征。综合研究认为南岭成矿带早侏罗世中酸性斑岩的小岩体较多，叠加多期断裂构造和碳酸盐岩建造，非常有利于铜多金属成矿物质的运移、富集。大宝山英安斑岩发育黑云母化、钾长石化、青磐岩化、绢英岩化、泥化等蚀变类型，铜矿化与绢英岩化、绿泥石化关系密切。大宝山铜矿中的英安斑岩沿逆冲推覆构造侵位并呈岩墙状产出，冷却过程中受区域构造应力产生了一组平行裂隙，岩浆房去气作用排出的热液沿裂隙蚀变围岩并充填成矿。大宝山斑岩型铜矿取得的找矿勘查成果表明，“全位成矿，缺位找矿”理念可以有效指导靶区圈定和老矿山外围（深部）找矿勘查，早侏罗世的南岭具有形成较大规模斑岩型铜矿的条件。  相似文献   

稀土矿床：基本特点与全球分布规律     

毛景文  宋世伟  刘敏  孟健寅 《地质学报》2022,96(11):3675-3697

本文介绍了全球稀土资源供需历史、现状和对未来的展望。从矿床成因视角切入，将稀土矿床分为内生和外生两大类型，其中内生稀土矿床包括碳酸岩型、碱性岩型、碱性岩型- 碳酸岩型、氧化铁铜金型、热液脉型，外生稀土矿床包括风化壳离子吸附型、沉积岩型、沉积矿产(煤矿、铝土矿和沉积磷矿)伴生型、砂矿和现代海洋底部含稀土的锰结核、结壳和软泥型。归纳总结了主要类型矿床的基本特点和时空分布；认为内生稀土矿床产出于四类构造环境，包括裂谷环境、碰撞后伸展环境、大陆碰撞环境和后俯冲伸展环境；从构造演化入手，探讨了在外生与内生地质过程中稀土元素的迁移和富集规律，建立了涵盖主要矿床类型的构造- 成矿模型。  相似文献   

云南兰坪-思茅盆地生物地球化学找钾技术方法研究初探     

伯英  刘成林  沈力建  丁婷 《地质学报》2022,96(7):2626-2633

在生物地球化学和“深穿透”理论的指导下,在兰坪-思茅盆地勐野井钾盐矿区及周边开展了生物地球化学找钾技术方法的探索性研究。沿江城县勐野井钾盐矿区及周边一线,对乔木类植物叶子进行了取样,分析,数据处理,特征指标筛选,获得了研究区植物样品主量和微量组分含量背景值,初步圈定了异常区,与以往圈定的找钾远景区较吻合。该区生物地球化学找钾技术取得较好的效果,今后还需扩大采样区域,获得更多样本数据,将找钾特征指标及其异常值的阈值进一步补充完善。  相似文献   

赣南合龙钨矿矿床地质、成岩成矿时代与成矿模式     

尹政  赵正  陶建利  吴胜华  李宏伟  甘加伟  陈伟  李小伟 《岩石学报》2021,37(5):1531-1552

合龙钨矿床位于南岭东西向构造岩浆带与北-北东向于山构造带交汇部位,是南岭东段于都-赣县矿集区的重要组成。合龙钨矿床是赣南地区近年在石英脉型钨矿勘查取得最重要突破的矿区,新发现钨多金属矿体达48条,新探明黑钨矿资源量3.5万余吨,WO_3平均品位2.189%,深部具有大型以上资源潜力。合龙钨矿床以外带石英大脉型矿体与岩体内石英细脉-云英岩型钨矿体分带共生为特色,区别于经典的石英脉型钨矿床的"五层楼"分带,也不同于"西华山式"仅岩体内成矿和"盘古山式"的仅岩体外成矿,故对其开展成岩成矿时差研究、内外带成矿过程对比研究和成矿模式研究具有重要意义。本文在矿床地质工作基础之上,对该矿床进行了较详细的矿物学研究,对比了不同阶段、不同分带黑钨矿和白钨矿的矿物化学特征;应用LA-ICP-MS锆石U-Pb法获得深部隐伏中细粒斑状黑云母花岗岩的成岩年龄为159.0Ma;应用辉钼矿Re-Os等时线法,测定了内带石英脉-云英岩型矿体成矿时代为157.3Ma,外带石英脉型矿体成矿时代为159.6Ma。研究表明,合龙钨矿床形成于燕山早期,是华南东部中生代大规模花岗质岩浆活动与钨多金属成矿作用的产物,其成矿作用紧随花岗质岩浆侵入而发生,成岩与成矿时间基本一致。内脉带矿化略晚于外脉带钨矿化,外脉带黑钨矿以相对高温阶段形成的含锰钨铁矿为主,内脉带黑钨矿则以成矿作用中晚期的含铁钨锰矿为主。基于上述研究成果,本文建立了"合龙式"钨矿床成矿模式,对石英脉-云英岩型钨矿成矿理论研究具有一定的推动作用,对下一步勘查工作部署具有重要实践意义。  相似文献   

四川木里耳泽岩溶型金矿床形成条件和成矿机制   总被引：1，自引：0，他引：1       下载免费PDF全文

郑明华  阳正熙 《地质科学》1995,30(4):363-373

四川本里耳泽金-菱铁矿建造矿床,赋存于上二叠统海相碳酸盐岩层中,矿化受古岩溶的严格控制,组成矿石的基本矿物为菱铁矿,金不均匀地分布于菱铁矿矿体内。成矿溶液来自加热的循环地下水。成矿过程分为早阶段和中-晚阶段。成矿温度为156-210℃,成矿深度小于1km.成矿物质主要来自地层。成矿热液呈碱性和弱还原性,贫硫,含中等盐度。矿床形成时的地质构造环境较稳定。这是我国仅见的一种特殊金矿类型。  相似文献   

贵州中三叠统烂泥沟金矿有机质的初步研究   总被引：2，自引：0，他引：2       下载免费PDF全文

李忠  刘铁兵 《地质科学》1995,30(3):283-290

烂泥沟金矿是以浊积岩为容矿岩石的微细浸染型金矿。有机岩石学分析表明,矿石与围岩中干酪根类型无明显差别,同属腐泥-腐植型。与围岩相比,矿石中干酪根成熟度(R₀=2.74%-3.06%)和含金性(6.15-24.8μg/g)均较高;干酪根总含金量在全岩中所占的比例是围岩高于矿石。氯仿沥青“A”的检测说明,矿石样品中可溶性有机质形成于强还原和高盐度环境,沥青质和含硫有机化合物发育。研究认为,干酪根含金性与碳的活化有关;不饱和的有机基因对金的动一定转换可能具有重要意义。  相似文献   

Environmental impacts from mining at Taojiang Mn ore deposit, central Hunan, China     

Bo PENG Shurong XIE Meilian XIAO Fucheng WU Zhi SONG 《中国地球化学学报》2006,25(B08):23-24

The Taojiang Mn ore deposit was exploited in the early 1960s, and waste rocks were developed since then. Because the Mn ores were hosted within the metal-enriched black shales （Peng et al., 2004）, the continuous mining has led to the exposure of an immense quality of black shales, which might cause serious impacts on environments. The present study deals with this environmental issue with samples from the waste rocks, and from the surrounding soils and surface water. The mineralogy of the waste rock was studied using EMPA, then a large number of elements in all waste rock, soil, and water samples were analyzed at a wide range of concentrations with high accuracy using an Elan6000 ICP-MS machine at Guangzhou Institute of Geochemistry, Chinese Academy of Sciences. The waste rock is composed mostly of black shales, with minor Mn carbonates. Both black shales and Mn carbonates of the waste rock contain many sulfide minerals, mainly pyrite, with minor galena, sphalerite, chalcopyrite, and others. The waste rocks are enriched in many metals including Sc, V, Cr, Co, Ni, Fe, Mn, Cu, Zn, Pb, Th, U, Mo, Sb, Sn, Tl, and others, and the metals are mostly hosted within the sulfides. Weathering of waste rocks might cause emission of the following metals： V, Cd, Ni, Th, U, Mo, Sb, Tl, Sc, Cr, Cu, Zn, Sn, and minor Co, and Pb. The surrounding soils are highly enriched in Cr, Co, Cu, Zn, Mn, Mo, Cd, Tl, and Pb, with the enrichment factors of 2.67.3.8, 7.26, 7.27, 8.2, 5.7, 13, and 5.4, respectively. The element ratios （Rb/Cs, Fe/Mn, Nb/Zr, Hf/Zr, and Ba/Sr） and REE distribution patterns of the soils are similar to those of the waste rocks and bedrocks.  相似文献   

Tin mineralization in the Dajing tin–polymetallic deposit, Inner Mongolia, China     

Y.W. Wang  J.B. Wang  L.J. Wang  Y.Z. Chen 《Journal of Asian Earth Sciences》2006,28(4-6):320-331

Dajing is a large-scale tin–polymetallic deposit that hosts the largest tin mine in North China. It is a hydrothermal vein-type deposit containing Sn, Cu, Pb, Zn, Ag, and minor components Co and In. The deposit consists of more than 690 veins hosted within Upper Permian sedimentary rocks.Three mineralization stages and six ore types are recognized with cassiterite constituting the dominant tin mineral. The SnO₂ content of cassiterite increases in the sequence of mineralization stages shear-deformation→cassiterite–quartz→cassiterite–sulfide (or chalcopyrite–pyrite) stage, while the content of FeO, TiO₂, Nb₂O₅, Ta₂O₅, and In₂O₅ tends to decrease with increases in NiO and Ga₂O₅. It is considered that the negative correlation between SnO₂ and FeO, Nb₂O₅, Ta₂O₅, and In₂O₅ results from elemental substitutions. The early stage cassiterite is much richer in Ta and the later stage cassiterite is much poorer in Ti and Fe than is usual in hydrothermal vein type tin deposits. This is interpreted to indicate that the component of early stage cassiterite reflects a granitic magma source while the composition of later stage cassiterite has a more obvious strata source. The compositional variation of cassiterite corresponds to decreasing crystallization temperatures within each stage and between sequential stages with time. The characteristics of REE in cassiterite from two stages are in accord with that of subvolcanic rocks and the Linxi formation. It suggests that tin transported during the cassiterite–quartz stage may have originated from subvolcanic dikes (e.g., dacite porphyry), while in the cassiterite–sulfide stage, tin may have been derived from wallrock (e.g. siltstone) of the Upper Permian-age Linxi Formation.  相似文献   

Geochemistry and Origin of Ananai Stratiform Manganese Deposit in the Northern Chichibu Belt, Central Shikoku, Japan     

Koichiro Fujinaga    Tatsuo Nozaki  Takazumi Nishiuchi  Kiyoko Kuwahara  Asuhiro Kato 《Resource Geology》2006,56(4):399-414

Abstract. Major and trace element contents are reported for Permian manganese ore and associated greenstone from the Ananai manganese deposit in the Northern Chichibu Belt, central Shikoku, Japan. The manganese deposit occurs between greenstone and red chert, or among red chert beds. Chemical compositions of manganese ore are characterized by enrichments in Mn, Ca, P, Co, Ni, Zn, Sr and Ba, and negative Ce and positive Eu anomalies relative to post-Archean average Australian Shale (PAAS). Geochemical features of the manganese ore are similar to those of modern submarine hydrother-mal manganese deposits from volcanic arc or hotspot setting. In addition, geochemical characteristics of the greenstone closely associated with the Ananai manganese deposit are analogous to those of with-in plate alkaline basalt (WPA). Consequently, the Ananai manganese deposit was most likely formed by hydrothermal activity related to hotspot volcanism in the Panthalassa Ocean during the Middle Permian. This is the first report documenting the terrestrially-exposed manganese deposit that was a submarine precipitate at hotspot.  相似文献   

Great earthquakes of variable magnitude at the Cascadia subduction zone   总被引：1，自引：0，他引：1  

Alan R. Nelson  Harvey M. Kelsey 《Quaternary Research》2006,65(3):354-365

Comparison of histories of great earthquakes and accompanying tsunamis at eight coastal sites suggests plate-boundary ruptures of varying length, implying great earthquakes of variable magnitude at the Cascadia subduction zone. Inference of rupture length relies on degree of overlap on radiocarbon age ranges for earthquakes and tsunamis, and relative amounts of coseismic subsidence and heights of tsunamis. Written records of a tsunami in Japan provide the most conclusive evidence for rupture of much of the plate boundary during the earthquake of 26 January 1700. Cascadia stratigraphic evidence dating from about 1600 cal yr B.P., similar to that for the 1700 earthquake, implies a similarly long rupture with substantial subsidence and a high tsunami. Correlations are consistent with other long ruptures about 1350 cal yr B.P., 2500 cal yr B.P., 3400 cal yr B.P., 3800 cal yr B.P., 4400 cal yr B.P., and 4900 cal yr B.P. A rupture about 700-1100 cal yr B.P. was limited to the northern and central parts of the subduction zone, and a northern rupture about 2900 cal yr B.P. may have been similarly limited. Times of probable short ruptures in southern Cascadia include about 1100 cal yr B.P., 1700 cal yr B.P., 3200 cal yr B.P., 4200 cal yr B.P., 4600 cal yr B.P., and 4700 cal yr B.P. Rupture patterns suggest that the plate boundary in northern Cascadia usually breaks in long ruptures during the greatest earthquakes. Ruptures in southernmost Cascadia vary in length and recurrence intervals more than ruptures in northern Cascadia.  相似文献