Seismic random noise attenuation and signal-preserving by multiple directional time-frequency peak filtering     

《Comptes Rendus Geoscience》2015,347(1):2-12

Time-frequency peak filtering (TFPF) is an effective method for seismic random noise attenuation. The linearity of the signal has a significant influence on the accuracy of the TFPF method. The higher the linearity of the signal to be filtered is, the better the denoising result is. With this in mind, and taking the lateral coherence of reflected events into account, we do TFPF along the reflected events to improve the degree of linearity and enhance the continuity of these events. The key factor to realize this idea is to find the traces of the reflected events. However, the traces of the events are too hard to obtain in the complicated field seismic data. In this paper, we propose a Multiple Directional TFPF (MD–TFPF), in which the filtering is performed in certain direction components of the seismic data. These components are obtained by a directional filter bank. In each direction component, we do TFPF along these decomposed reflected events (the local direction of the events) instead of the channel direction. The final result is achieved by adding up the filtering results of all decomposition directions of seismic data. In this way, filtering along the reflected events is implemented without accurately finding the directions. The effectiveness of the proposed method is tested on synthetic and field seismic data. The experimental results demonstrate that MD–TFPF can more effectively eliminate random noise and enhance the continuity of the reflected events with better preservation than the conventional TFPF, curvelet denoising method and F–X deconvolution method.  相似文献   

Experiments on the reflection coefficients of a detached breakwater in a directional wave field     

Wei-Po Huang  Chun-Ren Chou  John Z. Yim 《Coastal Engineering》2003,47(4):367-379

Results of estimating the directional wave fields in front of a detached breakwater are presented here in this paper. Two of non-phase-locked methods, i.e., the Maximum Likelihood Method (MLM) and the Extended Maximum Entropy Principle Method (EMEP), were adopted for the purpose. In general, the latter outperforms the former. It is shown that the reflection coefficients decrease with increasing distances away from the detached breakwater, and within four wavelengths from the detached breakwater, the rate of the decrease is faster for wave fields having larger directional spreads. When the measuring distance is more than four wavelengths away from the detached breakwaters, the reflection coefficients tend to reach to a constant value. It is shown that, with the use of the non-phase-locked EMEP method, the effective region can be extended, as compared with the results of Huntley and Davidson [J. Waterw. Port Coast. Ocean Eng. 124 (1998) 312].  相似文献   

Evaluation of directional normalization methods for Landsat TM/ETM+ over primary Amazonian lowland forests     

《International Journal of Applied Earth Observation and Geoinformation》2017

Biodiversity mapping in extensive tropical forest areas poses a major challenge for the interpretation of Landsat images, because floristically clearly distinct forest types may show little difference in reflectance. In such cases, the effects of the bidirectional reflection distribution function (BRDF) can be sufficiently strong to cause erroneous image interpretation and classification. Since the opening of the Landsat archive in 2008, several BRDF normalization methods for Landsat have been developed. The simplest of these consist of an empirical view angle normalization, whereas more complex approaches apply the semi-empirical Ross–Li BRDF model and the MODIS MCD43-series of products to normalize directional Landsat reflectance to standard view and solar angles. Here we quantify the effect of surface anisotropy on Landsat TM/ETM+ images over old-growth Amazonian forests, and evaluate five angular normalization approaches. Even for the narrow swath of the Landsat sensors, we observed directional effects in all spectral bands. Those normalization methods that are based on removing the surface reflectance gradient as observed in each image were adequate to normalize TM/ETM+ imagery to nadir viewing, but were less suitable for multitemporal analysis when the solar vector varied strongly among images. Approaches based on the MODIS BRDF model parameters successfully reduced directional effects in the visible bands, but removed only half of the systematic errors in the infrared bands. The best results were obtained when the semi-empirical BRDF model was calibrated using pairs of Landsat observation. This method produces a single set of BRDF parameters, which can then be used to operationally normalize Landsat TM/ETM+ imagery over Amazonian forests to nadir viewing and a standard solar configuration.  相似文献   

A laboratory study of directional spectra with maximum likelihood method-Ⅰ Developing wind wave     

Zhao Dongliang  Masuda Akir  Wen Shengchang  Guan Changlong 《海洋学报(英文版)》1999,18(1):59-74

measurements by a circular array consisting of 18 wave gauges in a large wave tank, directional spectra of wind-generated waves in deep water are systematically determined by using maximum likelihood method The investigations reveal that the angular spreading of the wave energy is consistent with cos^2s(θ/2) proposed by Longuet-Higgins et al.(1963, Ocean Wave Spectra, 111-136), if the bimodal distributions of wave energy are not taken into account. Bimodality occurring on higher frequency than peak frequency is too rare to affect our whole resalts. Surprisingly, a much broader directional spreading than that of the field, which is interpreted by the strongly nonlinear energy transfer because of the very young waves in laboratory, is found. The parameter s depends on frequency in the same way as observed by Mitsuyasu et al.(1975, Journal of Physical Oceanography, 5, 750-760) and Hasselmann et al.(1980, Journal of Physical Oceanography, 10, 1264-1280) in the field, and the relationship between the four nondimensional parameters s_m, f_o, b₁ and b₂, determining the directional width, and ū₁₀ (corresponding to the inverse of wave age) are given respectively. The observed distributions are found to agree well with the suggestion of Donelan et al.(1985, Philosophical Transaction of Royal Society of London, A315, 509-562) when applied to field waves.  相似文献   

Directional site effects in a non-volcanic gas emission area (Mefite d’Ansanto,southern Italy): Evidence of a local transfer fault transversal to large NW–SE extensional faults?     

《Physics and Chemistry of the Earth》2013

The technique of the wavefield polarization is applied to ambient vibrations recorded in the Mefite d’Ansanto area, an important non-volcanic natural emission of low temperature CO₂ enriched gases. Twenty-five measurements were performed in the study area, eleven near the emission site and the other fourteen in different sites within an area of 5 km. Polarization is assessed both in the frequency and time domain through the individual-station horizontal-to-vertical spectral ratio and covariance-matrix analysis, respectively. We find a significant tendency of ground motion in the gas emission area to be polarized in the horizontal plane, with a N115° predominant trend. This polarization tends to disappear while moving far from the site. According to previous papers in other study areas, such a directional effect is likely caused by fault-induced fractures and tends to be orthogonal to the fracture strike. The predominant NW–SE regional faulting does not fit the N115° polarization direction. To explain observations, we propose an interpretation in terms of a NE–SW oriented, local transfer fault as inferred from the lineament analysis. The intersection of the damage zone of this fault with the regional NW–SE normal fault system could easily be the responsible for the gas emissions since it favors a locally increased crustal weakness.  相似文献   

HDD铺管引起地表工后变形的数值模拟分析     

刘耀东  石朋飞  乌效鸣 《岩土钻凿工程》2012,(4):1-5

水平定向钻进（HDD）是一种重要的非开挖铺管技术,在非开挖领域应用非常广泛。由于其会扰动周围地层以及造成地层损失,进而造成一定程度的地表变形,如地表沉降、地表水平变形等。本文采用有限差分数值模拟方法,运用FLAC3D软件分析了HDD铺管的引起的地表工后变形问题;综合考虑了不同地层内聚力、地表荷载及扩孔级数情况下的地表工后变形。  相似文献   

复合式商业建筑的实践与思考     

黄炎冰 《中国勘察设计》2012,(6):76-79

本文通过对于上海浦江沃尔玛广场设计过程的概念探讨,试图廓清在特定城市区域,通过关键建筑的建设,达到丰富城市空间类型,改善城市空间品质的目的,也在设计整体实践中,思考当下特殊时期,新商业建筑的设计方法。  相似文献   

DN630供水管道定向钻穿越淮河工程的设计和施工     

朱旋  屈学平 《岩土钻凿工程》2011,(2):11-14

作为非开挖施工的一个分支,定向钻穿越技术得到了越来越广泛的应用。本文以DN630供水管道定向钻穿越淮河工程为例,介绍了定向钻穿越的技术特点,指出了设计基本原则及设计要素如管道钻进的入土角、出土角、曲率半径和穿越深度等确定方法,并阐述了定向钻穿越施工工艺流程及泥浆配制、钻导向孔、扩孔及管道回拖等主要施工工艺。  相似文献   

注浆技术在砂卵石地层水平（定）导向钻进工程中的应用研究     

梁小强  张可能  赵自亮 《岩土钻凿工程》2011,(2):24-29

本人在借鉴前人成果并结合施工经验的基础上,系统总结了砂卵石地层与非开挖钻进施工的适应性,对非开挖钻进施工中出现的问题进行了归纳和分类,并对其原因进行了分析和探讨。同时,为了解决非开挖导向钻进在复杂地层特别是砂卵石层中的施工难题,考虑采用注浆预加固技术对砂卵石层进行预先加固,以提高其强度,保证非开挖导向钻进的顺利进行。更进一步地,对水平孔中注浆预加固的三种方法（垂直注浆法、导管注浆法、随钻注浆法）在导向钻进工程中的概念、适用范围、优缺点以及实施控制要点等进行了对比和研究。  相似文献   

相控震源定向地震波信号分析   总被引：8，自引：6，他引：2       下载免费PDF全文

姜弢  林君  杨冬  陈祖斌 《地球物理学报》2008,51(5):1551-1556

应用可控震源地震勘探,当环境噪声很强,采用组合震源工作仍不能满足信噪比要求时,引入能形成定向地震波的相控震源.由相控震源定向照明地震理论分析,主波束方向上3单元相控震源产生的反射地震波信号信噪比比单震源高6.53~9.54 dB,比组合震源高1.76~4.77dB.为研究相控地震实际效果,在同一测区进行了三种震源地震对比实验.由单炮地震记录和水平叠加时间剖面可知,相控震源反射波信号信噪比明显高于单震源情况,略高于组合震源情况.进一步对反射波信号功率谱特性做定量分析,得到如下结果：与单震源情况相比,相控震源使各道反射波信号信噪比提高了0.75~8.15 dB,平均提高3.65 dB;与组合震源情况相比,各道信噪比提高了0.93~3.17 dB,平均提高2.02 dB,实验结果与理论分析吻合.综上所述可知,基于相控震源的定向照明地震技术是可行的,可以有效提高地震信号的信噪比.  相似文献