WRF-chem sensitivity to vertical resolution during a saharan dust event     

《Physics and Chemistry of the Earth》2016

The Saharan dust event that occurred between the 22nd and 30th of June 2012 influenced the atmospheric radiative properties over North Africa, the Iberian Peninsula, the Western Mediterranean basin, extending its effects to France and Southern England. This event is well documented in satellite imagery, as well as on the air quality stations over the Iberian Peninsula and the AERONET NASA network. In order to assess the effect of the model vertical resolution on the extinction coefficient fields, as a proxy to the particulate matter concentrations in the atmosphere, the WRF-Chem model was applied during this period over a mother domain with a resolution of 18 km, covering Europe and North Africa. To this end five model setups differing in the number of vertical levels were tested. Model skills were evaluated by comparing the model results with CALIPSO and EARLINET LIDAR data. Results show that the model is able to simulate the higher level aerosol transport but it is susceptible to the vertical resolution used. This is due to the thickness of the transport layers which is, eventually, thinner than the vertical resolution of the model. When comparing model results to the observed vertical profiles, it becomes evident that the broad features of the extinction coefficient profile are generally reproduced in all model configurations, but finer details are captured only by the higher resolution simulations.  相似文献   

Dust emission by off-road driving: Experiments on 17 arid soil types, Nevada, USA   总被引：2，自引：0，他引：2  

Dirk Goossens  Brenda Buck 《Geomorphology》2009,107(3-4):118-138

Field experiments were conducted in Nellis Dunes Recreational Area (Clark County, Nevada, USA) to investigate emission of dust produced by off-road driving. Experiments were carried out with three types of vehicles: 4-wheelers (quads), dirt bikes (motorcycles) and dune buggies, on 17 soil types characteristic for a desert environment. Tests were done at various driving speeds, and emissions were measured for a large number of grain size fractions. This paper reports the results for two size fractions of emissions: PM10 (particles < 10 μm) and PM60 (particles < 60 μm). The latter was considered in this study to be sufficiently representative of the total suspendable fraction (TSP). Off-road driving was found to be a significant source of dust. However, the amounts varied greatly with the type of soil and the characteristics of the top layer. Models predicting emission of dust by off-road driving should thus consider a number of soil parameters and not just one key parameter. Vehicle type and driving speed are additional parameters that affect emission. In general, 4-wheelers produce more dust than dune buggies, and dune buggies, more than dirt bikes. Higher speeds also result in higher emissions. Dust emitted by off-road driving is less coarse than the parent sediment on the road surface. Off-road driving thus results in a progressive coarsening of the top layer. Exceptions to this are silty surfaces with no, or almost no, vegetation. For such surfaces no substantial differences were observed between the grain size distribution of road dust and emitted dust. Typical emission values for off-road driving on dry desert soils are: for sandy areas, 30–40 g km^− 1 (PM10) and 150–250 g km^− 1 (TSP); for silty areas, 100–200 g km^− 1 (PM10) and 600–2000 g km^− 1 (TSP); for drainages, 30–40 g km^− 1 (PM10) and 100–400 g km^− 1 (TSP); and for mixed terrain, 60–100 g km^− 1 (PM10) and 300–800 g km^− 1 (TSP). These values are for the types of vehicles tested in this study and do not refer to cars or trucks, which produce significantly more dust.  相似文献   

Mitigation of lunar dust adhesion by surface modification   总被引：2，自引：0，他引：2  

Adrienne Dove  Genevieve Devaud  Xu Wang  Mark Crowder  Anna Lawitzke  Christina Haley 《Planetary and Space Science》2011,59(14):1784-1790

Dust has been recognized as one of the greatest hazards in continued lunar exploration due to its tenacious adhesion to everything with which it comes into contact. Unfortunately, there is little known about the mechanisms of adhesion on widely varying surface types: van der Waals and electrostatic forces are the dominant forces under consideration here. Surface energy, roughness, mechanical properties and electronic properties are all known to contribute to the adhesion characteristics. An optimal solution to mitigate dust adhesion would be to identify the dominant components of the adhesive force and to reduce that force by surface modification. In this study, an ion beam process was used to modify (treat) the surfaces of three dramatically different materials spanning the range of conductor (black Kapton), semiconductor (silicon), and insulator (quartz). Adhesive forces between less than JSC-1 lunar simulants and these virgin/treated surfaces were measured in vacuum using a centrifugal force detachment method. We found that JSC-1 particles adhered less to treated silicon and quartz surfaces, correlated with a reduction in van der Waals force due to a reduced surface energy. The large reduction in adhesion for treated black Kapton is mainly due to the large decrease in the electrostatic (image) force that results from reduced contact charging. Materials in space and on the lunar surface will be directly exposed to high-energy ultraviolet radiation prior to being covered by dust, so the UV irradiation effects on surface adhesion were also examined. Both virgin and treated quartz surfaces are most affected by the UV-irradiation, showing dramatically increased adhesion.  相似文献   

Correlation between rainfall and dust occurrence at mildura,Australia: The difference between local and source area rainfalls     

B. Yu  D. T. Neil  P. P. Hesse 《地球表面变化过程与地形》1992,17(7):723-727

In studies of temporal variation in dust activity, rainfall recorded at the same location as the dust events (local rainfall) has commonly been used as a climatic control variable. The main objectives of this note are to test the validity of using local rainfall and to determine the improvement in the relationship between rainfall and dust activity that could be achieved by using regional rainfall in the dust source area. For the period 1960-1989 at Mildura, Australia, the likely dust source area was identified by analysing wind direction during dust events. It was found that a marked improvement in the correlation between dust activity and antecedent rainfall can be achieved by using the regional source area rainfall rather than local rainfall. The improved correlation suggests that widespread drought is more important than local below-average rainfall in intensifying dust activity.  相似文献   

Follow-up observations of β-pic-like stars     

H. J. Walker  H. M. Butner 《Astrophysics and Space Science》1995,224(1-2):389-393

Following the discovery, by IRAS, of the dust disc around Vega and three other main sequence stars, searches have been made for other candidates. The-Pic-like candidates have 12µm excesses and 100µm fluxes (unlike the Vega-like candidates), so they can be further investigated using ground-based techniques. Data are presented here, comprising 10µm spectroscopy and sub-mm observations, for several candidates from the Walker & Wolstencroft list, showing that the stars have silicate dust, and optically thick dust discs even at 1300µm.  相似文献   

内蒙古科尔沁沙地临界起沙阈值的范围确定   总被引：6，自引：0，他引：6       下载免费PDF全文

林鹏飞  刘海龙  薛巍  李慧岷  姜金荣  宋米荣  宋毅  王夫常  张明华 《Acta Meteorologica Sinica》2016,74(1):76-88

临界起沙阈值可表征地表土壤的可蚀性,是风蚀起沙研究中非常重要的物理量之一。基于微气象学方法,将沙尘浓度和垂直沙尘通量均开始增加且至少持续0.5 h所对应的摩擦速度(或风速)确定为临界起沙摩擦速度u_*t(或临界起沙风速U_t)。利用内蒙古科尔沁沙地地区2010-2013年春季大气环境综合观测资料,分析了不同沙尘天气过程(扬沙、沙尘暴和强沙尘暴)起沙阶段沙尘浓度和垂直沙尘通量随摩擦速度的演变特征,精细确定了该地区临界起沙摩擦速度(u_*t)和临界起沙风速(U_t)的范围分别为0.45±0.20和6.5±3.0 m/s,同时讨论了不同起沙判据对确定临界起沙阈值产生的影响。相比而言,采用的起沙判据尽可能地排除了沙尘输送和沉降过程的影响,适用于不同的沙尘天气类型,使沙尘粒子进入大气的起沙结果更趋于合理,其结果可为建立统一、合理的起沙判据提供参考。  相似文献   

Quasiintegrals of the photogravitational eccentric restricted three-body problem with Poynting–Robertson drag     

G. F. Chörny 《Celestial Mechanics and Dynamical Astronomy》2007,97(4):229-248

A restricted three-body problem for a dust particle, in presence of a spherical cometary nucleus in an eccentric (elliptic, parabolic or hyperbolic) orbit about the Sun, is considered. The force of radiation pressure and the Poynting– Robertson effect are taken into account. The differential equations of the particle’s non-inertial spatial motion are investigated both analytically and numerically. With the help of a complex representation, a new single equation of the motion is obtained. Conversion of the equations of motion system into a single equation allows the derivation of simple expressions similar to the integral of energy and integrals of areas. The derived expressions are named quasiintegrals. Relative values of terms of the energy quasiintegral for a smallest, largest, and a mean comet are calculated. We have found that in a number of cases the quasiintegrals are related to the regular integrals of motion, and discuss how the quasiintegrals may be applied to find some significant constraints on the motion of a body of infinitesimal mass.  相似文献   

Charging and motion of dust grains near the terminator of the moon     

N. Borisov  U. Mall 《Planetary and Space Science》2006,54(6):572-580

We discuss the formation of strong local electric fields near minicraters or hills in the vicinity of the terminator. Electrons, having large thermal velocity compared to the solar wind speed can easily penetrate into the shadowed part of a minicrater. At the same time only protons with velocities much higher than their thermal speed can reach such regions. This results in the formation of a strong local negative potential whose magnitude depends on the steepness of the shadowed slope of the minicrater. The extremely small conductivity of the lunar regolith at the shadowed side of the crater prevents any significant electric discharge and thus supports the formation of a strong potential difference at scales much smaller than the Debye radius. Our estimates show that the created local electric fields are sufficiently strong enough to elevate dust grains with the sizes of the order of above the surface. The suggested mechanism is efficient only after sunset rather close to the terminator. Far away from the terminator at the dark side the fluxes of charged particles hitting the surface are so small that the process of dust elevation becomes too weak.  相似文献   

Galileo in-situ dust measurements in Jupiter’s gossamer rings     

Harald Krüger  Douglas P. Hamilton  Eberhard Grün 《Icarus》2009,203(1):198-213

Galileo was the first artificial satellite to orbit Jupiter. During its late orbital mission the spacecraft made two passages through the giant planet’s gossamer ring system. The impact-ionization dust detector on board successfully recorded dust impacts during both ring passages and provided the first in-situ measurements from a dusty planetary ring. During the first passage—on 5 November 2002 while Galileo was approaching Jupiter—dust measurements were collected until a spacecraft anomaly at 2.33R_J (Jupiter radii) just 16 min after a close flyby of Amalthea put the spacecraft into a safing mode. The second ring passage on 21 September 2003 provided ring dust measurements down to about 2.5R_J and the Galileo spacecraft was destroyed shortly thereafter in a planned impact with Jupiter. In all, a few thousand dust impacts were counted with the instrument accumulators during both ring passages, but only a total of 110 complete data sets of dust impacts were transmitted to Earth. Detected particle sizes range from about 0.2 to 5 μm, extending the known size distribution by an order of magnitude towards smaller particles than previously derived from optical imaging [Showalter, M.R., de Pater, I., Verbanac, G., Hamilton, D.P., Burns, J.A., 2008. Icarus 195, 361-377; de Pater, I., Showalter, M.R., Macintosh, B., 2008. Icarus 195, 348-360]. The grain size distribution increases towards smaller particles and shows an excess of these tiny motes in the Amalthea gossamer ring compared to the Thebe ring. The size distribution for the Amalthea ring derived from our in-situ measurements for the small grains agrees very well with the one obtained from images for large grains. Our analysis shows that particles contributing most to the optical cross-section are about 5 μm in radius, in agreement with imaging results. The measurements indicate a large drop in particle flux immediately interior to Thebe’s orbit and some detected particles seem to be on highly-tilted orbits with inclinations up to 20°. Finally, the faint Thebe ring extension was detected out to at least 5R_J, indicating that grains attain higher eccentricities than previously thought. The drop interior to Thebe, the excess of submicron grains at Amalthea, and the faint ring extension indicate that grain dynamics is strongly influenced by electromagnetic forces. These findings can all be explained by a shadow resonance as detailed by Hamilton and Krüger [Hamilton, D.P., Krüger, H., 2008. Nature 453, 72-75].  相似文献   

植被参数变化对沙尘起沙影响机理的数值模拟   总被引：5，自引：1，他引：4  

张钛仁  宋振鑫  王金艳  李自珍 《高原气象》2008,27(2):392-400

分析了叶面积指数和植被覆盖变化对沙尘暴起沙过程的影响机理。在一个集成的沙尘数值模拟预报系统中,将模拟区域的叶面积指数分成了0,0.5,3.0和卫星反演的实测值4种,结果表明,叶面积指数对沙尘的数值模拟有较大的影响,利用卫星反演的叶面积指数计算沙尘浓度时,沙尘浓度的变化介于叶面积指数为0~0.5之间。将植被覆盖度数据分成0,0.2和卫星反演的实测值3个类型。当植被覆盖度都为0时,沙尘浓度最大;当植被覆盖度为0.2时,沙尘浓度出现的范围明显减少。  相似文献