基于KronosFlow软件对逆冲推覆带构造-热演化的初探     

李丹  常健  李晨星  姚同云  刘敏珠 《地质力学学报》2021,27(6):975-986

盆地模拟是含油气盆地勘探评价的重要技术方法之一,然而传统的盆地建模2D模拟技术仅适用于拉张型盆地,使得挤压型盆地横向上的热史重建一直是个难题,从而制约了进一步的油气勘探。目前由法国Beicip-Franlab公司设计的KronosFlow软件突破了传统盆模软件对逆冲推覆带、盐构造和泥底辟等复杂构造的局限性,精确控制了横向和垂向上的构造位移,通过跟踪单个网格连续运动形态、恢复侧向变形量以及与TemisFlow软件无缝衔接,实现了对挤压型盆地埋藏史、热史、生排烃史以及油气运聚史的恢复。以塔里木盆地北缘柯坪逆冲推覆带和库车逆冲推覆带为例,利用KronosFlow软件定量反演了新生代以来的构造-热演化历史,并以实测数据约束并验证挤压环境下盆地模拟结果的有效性。柯坪逆冲推覆带的依木干他乌断层在40~30 Ma再次活动,断层附近志留系—泥盆系的温度大于85 ℃,柯坪塔格断层在15~10 Ma活动,断层附近志留系—泥盆系的温度小于70 ℃,寒武系（烃源岩成熟度为1.3%~1.7%）和奥陶系（烃源岩成熟度为0.7%~1.2%）烃源岩热演化程度高,生烃能力强。库车逆冲推覆带侏罗系北段温度介于50~70 ℃,南段温度介于210~230 ℃,盐构造造成地温异常,其中秋里塔格构造带膏盐岩最厚,降温效果最明显。   相似文献   

Modelling of groundwater flow in heterogeneous porous media by finite element method     

Hassan Smaoui  Lahcen Zouhri  Abdellatif Ouahsine  Erick Carlier 《水文研究》2012,26(4):558-569

The HySuf‐FEM code (Hydrodynamic of Subsurface Flow by Finite Element Method) is proposed in this article in order to estimate the spatial variability of the transmissivity values of the Berrechid aquifer (Morocco). The calibration of the model is based on the hydraulic head, hydraulic conductivity and recharge. Three numerical tests are used to validate the model and verify its convergence. The first test case consists in using the steady analytical solution of the Poisson equation. In the second, the model has been compared with the hydrogeological system which is characterized by an unconfined monolayer (isotropic layer) and computed by using PMWIN‐MODFLOW software. The third test case is based on the comparison between the results of HySuf‐FEM and the multiple cell balance method in the aquifer system with natural boundaries case. Good agreement between the Hydrodynamic of Subsurface Flow, the numerical tests and the spatial distribution of the thickening of the hydrogeological system is deduced from the analysis and the interpretations of hydrogeological wells. Copyright © 2011 John Wiley & Sons, Ltd.  相似文献   

Petroleum accumulation and leakage in a deeply buried carbonate reservoir,Níspero field (Mexico)     

Julien Bourdet  Jacques Pironon  Gilles Levresse  Jordi Tritlla 《Marine and Petroleum Geology》2010

The filling history of the Níspero deeply buried Lower Cretaceous carbonate reservoir (below 4000 m) from the south part of Gulf of Mexico was studied using a combination of data from petrography, stable isotopes and fluid inclusions and compared with a one-dimensional burial model to derive timing.  相似文献   

非线性弹性模型的改进     

俞帆  王铁儒 《岩土力学》1993,14(3):29-40

本文在邓肯-张模型进行深入探讨的基础上,提出了切线模量实质物理意义是剪切模量的观点,并分别采用应力法和应变法推导了剪切模量和体积模量(或变形模量)公式,还进行了考虑Biot固结非线性弹性油罐地基有限元实例分析。对不同的变形模量计算方法进行了比较,提出了改进的非线性弹性模型。  相似文献   

一种新的地图数据检索方法及其应用软件     

王桥 《武汉大学学报(信息科学版)》1993,(4)

本文提出了一种新的实用地图数据检索方法——“放大镜”式地图数据检索,建立了相应的软件系统,并讨论了该方法的数学基础、软件的特点,还给出了应用实例。  相似文献   

3D chemical model for geological macromolecules     

J.L. Faulon  M. Vandenbroucke  J.M. Drappier  F. Behar  M. Romero 《Organic Geochemistry》1990,16(4-6)

This study defines a chemical representation of the kerogen macromolecule based on data from physicochemical analyses. The model should permit: creation of various schematic drawings representing an average macromolecule; future integration of new analytical results (for instance on structures of biomarkers or biopolymers); and determination of the distribution of chemical bonds.The models developed in this study can be represented in a 3D space, using classical chemical symbols, in the form of cyclic groups linked to each other by aliphatic chains. One cyclic group is a connected set of aromatic, naphthenoaromatic or naphthenic rings. These cyclic groups are constructed using basic elements such as atoms and bonds defined by their length and direction.Modeling of kerogen is done in three successive steps. A library is first created to define atoms, bonds and cyclic groups. Secondly, starting from a set of equations describing the analytical results, cyclic and aliphatic groups are chosen in the appropriate stoechiometric amount to match the analytical data. Finally the construction is done: cyclic groups are placed randomly in a 3D space, connections are made by aliphatic chains, and functional groups are added.The molecular modeling software Xmol^TM can be operated on APOLLO stations. It allows the creation of libraries, the calculation of chemical bonds corresponding to the analyses and the construction of macromolecules. An example is given for a type III kerogen at the beginning of diagenesis.  相似文献   

微机遥感图像应用处理系统     

刘连硕  王杰生  何晓云  谢潇滢 《遥感学报》1989,(4)

本文详细介绍了我们研制的微机遥感图像应用处理系统。它的硬件部分以四台微机为主,采用分布式联接,组成四个子系统,可供1—4人同时操作,能方便地输入输出多种数据和图像。该系统的软件部分,由对应硬件子系统的四个软件包组成,即磁带机数据采集软件包,图像显示软件包,专题制图软件包及遥感应用处理软件包。作为重点的第四部分软件,是在遥感应用工作者的经验和工作方法的基础上设计的,它收集和综合了各种实用处理方法,比通用的图像处理软件包更具有遥感应用的特色。  相似文献   

CRM─PCIPS物化探数据图像处理系统的开发与实现     

朱礼  程宏君 《地质与勘探》1995,(6)

本文对ＣＲＭ－ＰＣＩＰＳ物化探数据图像处理系统的需要分析、开发环境、系统结构、文件系统、设计编码、程序调试与测试方法做了概括的介绍，并从“软件工程学”的角度对该项开发工作的进程，成功经验与不足之处进行了全面的评述。  相似文献   

大气传播延迟改正在GAMIT软件中的应用   总被引：4，自引：1，他引：3       下载免费PDF全文

张清志 《沉积与特提斯地质》2001,21(2):23-30

卫星信号从GPS卫星发射到地面的过程中经过了以充满大气为介质的空间,电磁波在这种变化的介质中传播,其传播的方向、速度、强度都可能随时改变,本文简略地介绍了大气传播延迟的产生及其对GPS测量的影响,并就GAMIT软件对大气传播延迟的控制方法和所采用的改正模型做一简单介绍,并对减弱和消除大气传播延迟的方法和手段进行了讨论。  相似文献   

消除强震加速度记录数字化误差的方法和处理软件     

于海英谢礼立  公茂盛 《地震工程与工程振动》2005,25(5):1-5

本文详细地分析了用数字化仪和激光扫描仪对模拟加速度记录进行数字化时所产生的误差及消除这些误差的方法，并开发了相关处理软件。数字化误差由数字化设备的系统误差和读数员在操作过程中的随机误差迭加而成，随机数字化误差是具有各态历经性质的、其振幅按高斯规律分布的平稳随机过程。利用激光扫描仪做强震记录数字化，工作效率很高。本文给出了激光扫描仪分析处理软件和消除数字化噪声实例。  相似文献