Three dimensional seismic studies of deep-water hazard-related features on the northern slope of South China Sea     

《Marine and Petroleum Geology》2016

Mass transport deposits and geological features related to fluid flow such as gas chimneys, mud diapirs and volcanos, pockmarks and gas hydrates are pervasive on the canyon dominated northern slope of the Pearl River Mouth basin of the South China Sea. These deposits and structures are linked to serious geohazards and are considered risk factors for seabed installations. Based on high resolution three dimensional seismic surveys, seismic characteristics, distributions and origins of these features are analyzed. A distribution map is presented and geometrical parameters and spatial distribution patterns are summarized. Results show that various groups of the mapped features are closely tied to local or regional tectonism and sedimentary processes. Mass transport complexes are classified as slides near the shelf break, initially deformed slumps on the flanks of canyons and highly deformed slumps on the lower slope downslope of the mouth of canyons. We propose them to be preconditioned by pore pressure changes related to sea level fluctuations, steep topography, and fluid and fault activities. Gas chimneys are mainly located in the vicinity of gas reservoirs, while bottom-simulating reflectors are observed within the gas chimney regions, suggesting gas chimneys serve as conduits for thermogenic gas. Mud diapirs/volcanos and pockmarks are observed in small numbers and the formation of pockmarks is related to underlying gas chimneys and faults. This study aims at reducing risks for deep-water engineering on the northern slope of South China Sea.  相似文献   

Microstructural characteristics of the Whitby Mudstone Formation (UK)     

《Marine and Petroleum Geology》2016

When trying to improve gas productivity from unconventional sources a first aim is to understand gas storage and gas flow potential through the rock by investigating the microstructure, mineralogy and matrix porosity of unfractured shale. The porosity and mineralogy of the Mulgrave Shale member of the Whitby Mudstone Formation (UK) were characterized using a combination of microscopy, X-ray diffraction and gas adsorption methods on samples collected from outcrops. The Whitby Mudstone is an analogue for the Dutch Posidonia Shale which is a possible unconventional source for gas. The Mulgrave shale member of the Whitby Mudstone Formation can microstructurally be subdivided into a fossil rich (>15%) upper half and a sub-mm mineralogically laminated lower half. All clasts are embedded within a fine-grained matrix (all grains < 2 μm) implying that any possible flow of gas will depend on the porosity and the pore network present within this matrix. The visible SEM porosity (pore diameter > 100 nm) is in the order of 0.5–2.5% and shows a non-connected pore network in 2D. Gas adsorption (N2, Ar, He) porosity (pore diameters down to 2 nm) has been measured to be 0.3–7%. Overall more than 40% of the visible porosity is present within the matrix. Comparing the Whitby Mudstone Formation to other (producing) gas shales shows that the rock plots in the low porosity and high clay mineral content range, which could imply that Whitby Mudstone shales could be less favourable to mechanical fracturing than other gas shales. Estimated permeability indicates values in the micro-to nano-darcy range.  相似文献   

漠河盆地多年冻土区天然气水合物地球化学调查及远景评价     

张富贵  唐瑞玲  杨志斌  朱敬华  周亚龙  孙忠军 《现代地质》2018,32(5):1003

漠河盆地是我国冻土发育的主要地区之一,发育良好的天然气水合物成藏系统,具有天然气水合物形成的良好条件。为了圈定天然气水合物远景区,识别油气聚集体,判别天然气水合物成因,在漠河盆地冻土较发育地区开展了1∶5万天然气水合物地球化学资源调查。结果表明：(1)在森林沼泽景观区,顶空气和荧光光谱指标是天然气水合物勘查的主要指标,借鉴青海木里冻土区天然气水合物地球化学勘查成功的经验,结合AMT、地质等资料分析,元宝山凹陷是天然气水合物较为有利的远景区;(2)岩心样品甲烷碳同位素分析显示,烃类气体分异明显,浅层烃类气体基本为生物气,深部烃类气源主要为混合成因气,个别解吸气为微生物气和热解气;(3)试验性应用了分形-GIS技术,可以细致可靠地进行异常区范围划定,消除干扰因素,有效地圈定水合物远景区。  相似文献   

水射流破碎南海含水合物沉积物数值模拟研究          下载免费PDF全文

潘栋彬  陈晨  杨林  靳成才  李曦桐  刘书源  陈勇  朱江 《探矿工程》2018,45(10):27-31

为研究高压水射流切割、破碎南海天然气水合物储层的过程,采用著名的LS—DYNA显示动力分析有限元程序,对淹没状态下,水射流破碎海底含水合物沉积物过程进行数值模拟研究,研究了不同射流速度对高压水射流作用下含水合物沉积物破碎效果的影响规律。随着射流速度的增大,冲蚀深度逐渐增大,两者呈线性递增关系。含水合物沉积物冲蚀体积是轴向冲蚀与径向冲蚀共同作用的结果,射流速度越大,对含水合物沉积物的轴向与径向冲蚀作用增强,加大了含水合物沉积物冲蚀体积递增速率。  相似文献   

Investigation of gas content of organic-rich shale:A case study from Lower Permian shale in southern North China Basin,central China     

Wei Dang  Jin-Chuan Zhang  Xuan Tang  Xiao-Liang Wei  Zhong-Ming Li  Cheng-Hu Wang  Qian Chen  Chong Liu 《地学前缘(英文版)》2018,9(2):559-575

Measuring gas content is an essential step in estimating the commerciality of gas reserves. In this study,eight shale core samples from the Mouye-1 well were measured using a homemade patented gas desorption apparatus to determine their gas contents. Due to the air contamination that is introduced into the desorption canister, a mathematical method was devised to correct the gas quantity and quality.Compared to the chemical compositions of desorbed gas, the chemical compositions of residual gas are somewhat different. In residual gas, carbon dioxide and nitrogen record a slight increase, and propane is first observed. This phenomenon may be related to the exposure time during the transportation of shale samples from the drilling site to the laboratory, as well as the differences in the mass, size and adsorptivity of different gas molecules. In addition to a series of conventional methods, including the USBM direct method and the Amoco Curve Fit(ACF) method, which were used here for lost gas content estimation, a Modified Curve Fit(MCF) method, based on the 'bidisperse' diffusion model, was established to estimate lost gas content. By fitting the ACF and MCF models to gas desorption data, we determined that the MCF method could reasonably describe the gas desorption data over the entire time period, whereas the ACF method failed. The failure of the ACF method to describe the gas desorption process may be related to its restrictive assumption of a single pore size within shale samples. In comparison to the indirect method, this study demonstrates that none of the three methods studied in this investigation(USBM, ACF and MCF) could individually estimate the lost gas contents of all shale samples and that the proportion of free gas relative to total gas has a significant effect on the estimation accuracy of the selected method. When the ratio of free gas to total gas is lower than 45%, the USBM method is the best for estimating the lost gas content, whereas when the ratio ranges from 45% to 75% or is more than 75%, the ACF and MCF methods, are the best options respectively.  相似文献   

Natural ring structures on the Baikal ice cover: Analysis of experimental data and mathematical modeling     

N.G. Granin  I.B. Mizandrontsev  V.V. Kozlov  E.A. Tsvetova  R.Yu. Gnatovskii  V.V. Blinov  I.A. Aslamov  K.M. Kucher  V.G. Ivanov  A.A. Zhdanov 《Russian Geology and Geophysics》2018,59(11):1514-1525

Hydrophysical studies and mathematical modeling of ring structures during ice cover on Lake Baikal have shown that their existence at the stage of ice cover degradation is due to anticyclonic currents. Such currents can be generated as a result of local upwelling, which we associate with the rise of methane hydrates from the top layer of bottom sediments and their dissociation. Analysis of satellite images shows that the radii of ice rings range from 1300 to 2400 m, which is close to the baroclinic Rossby radius. The measured ice thicknesses in the area of the rings are in agreement with model calculations. Deep water renewal in Lake Baikal can also be associated with the rise of hydrates.  相似文献   

Multi-factor sensitivity analysis on the stability of submarine hydrate-bearing slope     

《China Geology》2018,1(3):367-373

There are many factors affecting the instability of the submarine hydrate-bearing slope (SHBS), and the interaction with hydrate is very complicated. In this paper, the mechanical mechanism of the static liquefaction and instability of submarine slope caused by the dissociation of natural gas hydrate (NGH) resulting in the rapid increase of pore pressure of gas hydrate-bearing sediments (GHBS) and the decrease of effective stress are analyzed based on the time series and type of SHBS. Then, taking the typical submarine slope in the northern South China Sea as an example, four important factors affecting the stability of SHBS are selected, such as the degree of hydrate dissociation, the depth of hydrate burial, the thickness of hydrate, and the depth of seawater. According to the principle of orthogonal method, 25 orthogonal test schemes with 4 factors and 5 levels are designed and the safety factors of submarine slope stability of each scheme are calculated by using the strength reduction finite element method. By means of the orthogonal design range analysis and the variance analysis, sensitivity of influential factors on stability of SHBS are obtained. The results show that the degree of hydrate dissociation is the most sensitive, followed by hydrate burial depth, the thickness of hydrate and the depth of seawater. Finally, the concept of gas hydrate critical burial depth is put forward according to the influence law of gas hydrate burial depth, and the numerical simulation for specific submarine slope is carried out, which indicates the existence of critical burial depth.  相似文献   

川东南丁山地区龙马溪组页岩裂缝特征及对含气性的影响   总被引：1，自引：0，他引：1       下载免费PDF全文

范存辉 钟 城秦启荣  胡东风李 虎 朱梦月 何 顺 《地质科学》2018,(2):487-509

川东南丁山地区是近年来四川盆地页岩气勘探开发的热点区域,裂缝的发育对页岩含气性及保存条件有重要的影响。综合运用野外露头、岩心、测井资料,结合岩石脆性矿物含量、岩石力学参数等数据,深入分析龙马溪组页岩裂缝发育特征和控制因素,并探讨了裂缝发育对含气性的影响。结果表明,丁山地区龙马溪组页岩裂缝主要以构造成因的剪切缝为主,裂缝优势方位共6组,主要包括4组平面剪切缝和2组剖面剪切缝,其发育主要受2个方向、3个阶段的构造应力场影响而成;裂缝延伸稳定,平均密度小,宽度小,充填程度高,主要被方解石和黄铁矿等充填。裂缝受控因素主要包括古构造应力场、构造部位、脆性矿物组分、岩石力学性质等;断层对裂缝发育具有明显的控制作用,其中断层两盘均存在裂缝发育程度急剧下降的临界范围,临界范围内裂缝发育程度高,超过此临界范围,裂缝发育程度变差且变化趋于平缓;不同期次的裂缝中,形成时间晚、规模过大、充填程度不高、与现今地应力方向一致或呈低角度相交的裂缝易造成页岩气的散失,对提高页岩含气性不利;龙马溪组岩石脆性矿物含量高,脆性指数属中等偏上程度,有利于构造缝发育且可压性较好。随着距齐岳山断裂距离的适当增加,龙马溪组页岩埋藏深度适中,地层压力增大,抗压强度增强高,脆性指数适中,构造保存条件变好,有利于不同方位的裂缝发育和页岩含气量的增加,位于该区域的DY2井与DY4井均位于该有利区域,含气性良好。研究结果对下一步深化页岩气勘探开发具有重要指导作用。  相似文献   

水合物地层低热固井水泥浆用相变微胶囊的制备及应用          下载免费PDF全文

杨国坤  汪爱明  尹舒婷  代天  刘天乐  蒋国盛 《探矿工程》2021,48(3):118-124

当深海固井遇到天然气水合物地层时,由于水泥浆水化放热,导致水合物的相变平衡条件发生改变,诱发水合物分解,引起二界面胶结质量下降等问题。为提高水合物地层固井质量,可向水泥浆中添加具有吸热控温作用的相变微胶囊,可有效降低固井水泥浆的水化升温。基于此,以配比石蜡为控温芯材、碳酸钙为壁材,利用自组装法制备了一种使用于深水水合物地层固井水泥浆控温微胶囊。由于固井水泥浆在达到水合物地层的过程中,外界温度环境复杂,单一相变温度的控温芯材极易失效。为扩展控温区间,选用切片石蜡与白油作为混合芯材,控温区间达到14.8~39.8 ℃。研究表明,该微胶囊表观形态良好、彼此无团聚,在热循环过程中,不易发生泄漏。与水泥浆复配后,对水泥浆流变性能无明显影响。在低掺加量时,微胶囊主要起降低水泥浆峰值温度的效果,并提升水泥石整体力学强度;高掺加量时,微胶囊既可以有效降低水泥浆峰值温度,也可以明显地延缓水泥浆放热速率。  相似文献   

Gas generation and expulsion characteristics of Middle–Upper Triassic source rocks,eastern Kuqa Depression,Tarim Basin,China: implications for shale gas resource potential     

P. Wang  X. Chen  J. Li  H. Yang  F. Jiang 《Australian Journal of Earth Sciences》2013,60(7):1001-1013

Frontier exploration in the Kuqa Depression, western China, has identified the continuous tight-sand gas accumulation in the Lower Cretaceous and Lower Jurassic as a major unconventional gas pool. However, assessment of the shale gas resource in the Kuqa Depression is new. The shale succession in the Middle–Upper Triassic comprises the Taliqike Formation (T₃t), the Huangshanjie Formation (T₃h) and the middle–upper Karamay Formation (T_2–3k), with an average accumulated thickness of 260 m. The high-quality shale is dominated by type III kerogen with high maturity and an average original total organic carbon (TOC) of about 2.68 wt%. An improved hydrocarbon generation and expulsion model was applied to this self-contained source–reservoir system to reveal the gas generation and expulsion (intensity, efficiency and volume) characteristics of Middle–Upper Triassic source rocks. The maximum volume of shale gas in the source rocks was obtained by determining the difference between generation and expulsion volumes. The results indicate that source rocks reached the hydrocarbon expulsion threshold of 1.1% VR and the hydrocarbon generation and expulsion reached their peak at 1.0% VR and 1.28% VR, with the maximum rate of 56 mg HC/0.1% TOC and 62.8 mg HC/0.1% TOC, respectively. The volumes of gas generation and expulsion from Middle–Upper Triassic source rocks were 12.02 × 10¹² m³ and 5.98 × 10¹² m³, respectively, with the residual volume of 6.04 × 10¹² m³, giving an average gas expulsion efficiency of 44.38% and retention efficiency of 55.62%. Based on the gas generation and expulsion characteristics, the predicted shale gas potential volume is 6.04 × 10¹² m³, indicating a significant shale gas resource in the Middle–Upper Triassic in the eastern Kuqa Depression.  相似文献