Fluid unmixing/immiscibility as an ore-forming process in the giant REE–Nb–Fe deposit, Inner Mongolian, China: Evidence from fluid inclusions     

Hong-Rui Fan  Fang-Fang Hu  Kui-Feng Yang  Kai-Yi Wang 《Journal of Geochemical Exploration》2006,89(1-3):104

The giant Bayan Obo REE–Nb–Fe deposit consists of replacement bodies hosted in dolomite marble made up of magnetite, REE fluorocarbonates, fluorite, aegirine, amphibole, calcite and barite. Two or three phase CO₂-rich, three phase hypersaline liquid–vapor–solid, and two phase liquid-rich inclusions have been recognized in mineralized fluorite and quartz samples. Microthermometry measurements indicate that the carbonic phase in CO₂-rich inclusions is nearly pure CO₂. Fluids involving in REE–Nb–Fe mineralization at Bayan Obo might be mainly of H₂O–CO₂–NaCl–(F–REE) system. Coexistences of brine inclusions and CO₂-rich inclusions with similar homogenization temperatures give evidence that immiscibility happened during REE mineralization. An unmixing of an original H₂O–CO₂–NaCl fluid probably derived from carbonatitic magma. The presence of REE-carbonates as an abundant solid in fluid inclusions shows that the original ore-forming fluids are very rich in REE, and therefore, have the potential to produce economic REE ores at Bayan Obo.  相似文献   

Tin mineralization in the Dajing tin–polymetallic deposit, Inner Mongolia, China     

Y.W. Wang  J.B. Wang  L.J. Wang  Y.Z. Chen 《Journal of Asian Earth Sciences》2006,28(4-6):320-331

Dajing is a large-scale tin–polymetallic deposit that hosts the largest tin mine in North China. It is a hydrothermal vein-type deposit containing Sn, Cu, Pb, Zn, Ag, and minor components Co and In. The deposit consists of more than 690 veins hosted within Upper Permian sedimentary rocks.Three mineralization stages and six ore types are recognized with cassiterite constituting the dominant tin mineral. The SnO₂ content of cassiterite increases in the sequence of mineralization stages shear-deformation→cassiterite–quartz→cassiterite–sulfide (or chalcopyrite–pyrite) stage, while the content of FeO, TiO₂, Nb₂O₅, Ta₂O₅, and In₂O₅ tends to decrease with increases in NiO and Ga₂O₅. It is considered that the negative correlation between SnO₂ and FeO, Nb₂O₅, Ta₂O₅, and In₂O₅ results from elemental substitutions. The early stage cassiterite is much richer in Ta and the later stage cassiterite is much poorer in Ti and Fe than is usual in hydrothermal vein type tin deposits. This is interpreted to indicate that the component of early stage cassiterite reflects a granitic magma source while the composition of later stage cassiterite has a more obvious strata source. The compositional variation of cassiterite corresponds to decreasing crystallization temperatures within each stage and between sequential stages with time. The characteristics of REE in cassiterite from two stages are in accord with that of subvolcanic rocks and the Linxi formation. It suggests that tin transported during the cassiterite–quartz stage may have originated from subvolcanic dikes (e.g., dacite porphyry), while in the cassiterite–sulfide stage, tin may have been derived from wallrock (e.g. siltstone) of the Upper Permian-age Linxi Formation.  相似文献   

Petrogenesis of Cretaceous adakitic and shoshonitic igneous rocks in the Luzong area, Anhui Province (eastern China): Implications for geodynamics and Cu–Au mineralization     

Qiang Wang  Derek A. Wyman  Ji-Feng Xu  Zhen-Hua Zhao  Ping Jian  Xiao-Lin Xiong  Zhi-Wei Bao  Chao-Feng Li  Zheng-Hua Bai 《Lithos》2006,89(3-4):424-446

Both adakitic and shoshonitic igneous rocks in the Luzong area, Anhui Province, eastern China are associated with Cretaceous Cu–Au mineralization. The Shaxi quartz diorite porphyrites exhibit adakite-like geochemical features, such as light rare earth element (LREE) enrichment, heavy REE (HREE) depletion, high Al₂O₃, MgO, Sr, Sr / Y and La / Yb values, and low Y and Yb contents. They have low ε_Nd(t) values (− 3.46 to − 6.28) and high (⁸⁷Sr / ⁸⁶Sr)_i ratios (0.7051–0.7057). Sensitive High-Resolution Ion Microprobe (SHRIMP) zircon analyses indicate a crystallization age of 136 ± 3 Ma for the adakitic rocks. Most volcanic rocks and the majority of monzonites and syenites in the Luzong area are K-rich (or shoshonitic) and were also produced during the Cretaceous (140–125 Ma). They are enriched in LREE and large-ion lithophile elements, and depleted in Ti, and Nb and Ba and exhibit relatively lower ε_Nd(t) values ranging from − 4.65 to − 7.03 and relatively higher (⁸⁷Sr / ⁸⁶Sr)_i ratios varying between 0.7057 and 0.7062. The shoshonitic and adakitic rocks in the Luzong area have similar Pb isotopic compositions (²⁰⁶Pb / ²⁰⁴Pb = 17.90–18.83, ²⁰⁷Pb / ²⁰⁴Pb = 15.45–15.62 and ²⁰⁸Pb / ²⁰⁴Pb = 38.07–38.80). Geological data from the Luzong area suggest that the Cretaceous igneous rocks are distributed along NE fault zones (e.g., Tanlu and Yangtze River fault zones) in eastern China and were likely formed in an extensional setting within the Yangtze Block. The Shaxi adakitic rocks were probably derived by the partial melting of delaminated lower crust at pressures equivalent to crustal thickness of > 50 km (i.e., 1.5 GPa), possibly leaving rutile-bearing eclogitic residue. The shoshonitic magmas, in contrast, originated mainly from an enriched mantle metasomatized by subducted oceanic sediments. They underwent early high-pressure (> 1.5 GPa) fractional crystallization at the boundary between thickened (> 50 km) lower crust and lithospheric mantle and late low-pressure (< 1.5 GPa) fractional crystallization in the shallow (< 50 km) crust. The adakitic and shoshonitic rocks appear to be linked to an intra-continental extensional setting where partial melting of enriched mantle and delaminated lower crust was probably controlled by lithospheric thinning and upwelling of hot asthenosphere along NE fault zones (e.g., Tanlu and Yangtze River fault zones) in eastern China. Both the shoshonitic and adakitic magmas were fertile with respect to Cu–Au mineralization.  相似文献   

3D numerical modelling of fluid flow in the Val-d’Or orogenic gold district: major crustal shear zones drain fluids from overpressured vein fields     

Georges Beaudoin  René Therrien  Catherine Savard 《Mineralium Deposita》2006,41(1):82-98

Fluid flow patterns have been determined using oxygen isotope isopleths in the Val-d’Or orogenic gold district. 3D numerical modelling of fluid flow and oxygen isotope exchange in the vein field shows that the fluid flow patterns can be reproduced if the lower boundary of the model is permeable, which represents middle or lower crustal rocks that are infiltrated by a metamorphic fluid generated at deeper levels. This boundary condition implies that the major crustal faults so conspicuous in vein fields do not act as the only major channel for upward fluid flow. The upper model boundary is impermeable except along the trace of major crustal faults where fluids are allowed to drain out of the vein field. This upper impermeable boundary condition represents a low-permeability layer in the crust that separates the overpressured fluid from the overlying hydrostatic fluid pressure regime. We propose that the role of major crustal faults in overpressured vein fields, independent of tectonic setting, is to drain hydrothermal fluids out of the vein field along a breach across an impermeable layer higher in the crust and above the vein field. This breach is crucial to allow flow out of the vein field and accumulation of metals in the fractures, and this breach has major implications for exploration for mineral resources. We propose that tectonic events that cause episodic metamorphic dehydration create a short-lived pulse of metamorphic fluid to rise along zones of transient permeability. This results in a fluid wave that propagates upward carrying metals to the mineralized area. Earthquakes along crustal shear zones cause dilation near jogs that draw fluids and deposit metals in an interconnected network of subsidiary shear zones. Fluid flow is arrested by an impermeable barrier separating the hydrostatic and lithostatic fluid pressure regimes. Fluids flow through the evolving and interconnected network of shear zones and by advection through the rock matrix. Episodic breaches in the impermeable barrier along the crustal shear zones allow fluid flow out of the vein field.  相似文献   

湖南船岭脚锡矿区矿化特征及成因探讨   总被引：2，自引：1，他引：2  

曾永红  王廷江  郑时干  曾志方 《华南地质与矿产》2006,(2):13-17

船岭脚锡矿为南岭锡多金属成矿带的一大型锡矿床。矿化类型较多,以构造蚀变带-矽卡岩复合型、接触带矽卡岩型锡矿为主,分布于中侏罗世姑婆山岩体接触带,且具分带性,自岩体内接触带往外依次为构造蚀变带-矽卡岩复合型、接触带矽卡岩型。矿化与成矿岩体及构造复合等因素密切相关,成矿物质主要来源于岩浆,为一与花岗岩有关的中高温矽卡岩型矿床。  相似文献   

深部找铀及湘南-桂北地区深部找铀潜景分析     

郑作环 《华东地质学院学报》2006,29(1):7-11

概述了国内外深部找矿的研究成果,指出深部找矿是当今发展的趋势。国内外重大矿产的成功发掘,其深度均在千米以上,铀矿化垂向分布深度可达4 km以上。综合介绍了国内外勘查深大矿床的特点和条件,认为岩石-构造条件是深部矿化定位的重要因素,复式岩体、成矿系统的垂向变化、构造地球物理-地球化学异常模型是深部找矿的关键依据。综述了中国南方湘南—桂北地区深部找铀的有利地质构造条件和潜力,成矿流体是该区铀矿化的根源,白垩—第三纪重大地质事件是该区深部铀成矿的重要前提,重大地质事件引发的NE-NNE,NW向深大断裂及断陷盆地是铀矿化赋存的重要场所和勘查靶区。在已知铀矿田、成矿带勘查范围基础上,在该区进行深部探索将会获得重大突破。探讨了湘南—桂北地区深部找铀的勘查思路和方法。  相似文献   

Structural controls on Tertiary orogenic gold mineralization during initiation of a mountain belt, New Zealand   总被引：3，自引：2，他引：3  

D. Craw  M. Begbie  D. MacKenzie 《Mineralium Deposita》2006,41(7):645-659

Two types of structurally controlled hydrothermal mineralization have occurred during folding of fissile schist in southern New Zealand: fold-related mineralization and normal fault-related mineralization. Both types have the same mineralogy and textures, and are dominated by quartz–ankerite veins and silicified breccias with ankeritic alteration. Most mineralized zones are thin (centimetre scale), although host schist is commonly impregnated with ankerite up to 20 m away. Thick (up to 5 m wide) mineralized zones are generally gold-bearing and contain pyrite and arsenopyrite with stibnite pods locally. Some of these auriferous zones have been extensively mined historically despite rugged topography and difficult access. Mineralization occurred during regional tectonic compression in the initial stages of development of the Southern Alps mountain belt at the Pacific–Australian plate boundary in the Miocene. Most of the gold-bearing deposits occur in east to south-east, striking normal faults that cut across mesoscopic folds in a belt that coincides with the southern termination of a regional-scale north trending antiform. Mineralized zones have similar structural control and relative timing to a nearby swarm of Miocene lamprophyre dykes and carbonatites. Limited stable isotopic data (C and O) and trace element geochemistry suggest that there was probably no genetic link between the igneous activity and gold mineralization. However, these two types of fluid flow have been controlled by the same tectonically created crustal plumbing system. This Miocene hydrothermal activity and gold deposition demonstrates that orogenic (mesothermal) mineralization can occur during the inception of an orogenic belt, not just in the latter stages as is commonly believed. These Miocene structures have been preserved in the orogen because the locus of uplift has moved northwards, so the early-formed gold deposits have not yet been structurally overprinted or eroded.  相似文献   

The chromite deposits associated with ophiolite complexes, Southeastern Desert, Egypt： Petrological and geochemical characteristics and mineralization     

Gehad M. Saleh 《中国地球化学学报》2006,25(4):307-317

1 Introduction The association of massive Fe-Ni-Cu sulfides andchromite is a very unusual feature of podiformchromitites occurring in mantle tectonites of ophioliticcomplexes. It has only been described in theSoutheastern Desert, Egypt, where sulfides a…  相似文献   

陕西穆家庄铜矿床后生成矿作用的流体地球化学证据   总被引：2，自引：2，他引：2  

朱华平  李虹  张德全  刘平 《西北地质》2005,38(2):54-61

尽管秦岭泥盆系铅锌金多金属成矿带成矿作用均与热水喷流沉积作用有关，柞山地区却有别于风太地区，具有独特的铜矿成矿背景。流体包裹体研究揭示了后生成矿流体的两阶段流体演化过程：第一阶段的成矿流体为中温，中高盐度岩浆热液含CO2的NaCl—H2O流体。均一温度为190-265℃，盐度12．5～35．34(w1％NaCl)，压力12．8～21．3MPa，在同地寄主矿物中均一温度变化小，而盐度变化极大，是岩浆流体沸腾的产物；第二阶段成矿流体为中高温，中高盐度岩浆期后热液NaCl-H2O流体。均一温度为300～350℃，盐度7．4～41．59(w1％NaCl)，压力10．8～19．3MPa。反映了岩浆期后热液流体的二次沸腾。应用流体地球化学的综合方法(包裹体流体组成、演化)识别出后生交代流体性质。穆家庄铜矿的成矿流体第一阶段为岩浆水，第二阶段的成矿流体为岩浆水加部分地层水(建造水)。氢氧同位素分析也支持上述结论。  相似文献   

甘肃花岗岩类成矿作用研究与找矿方向   总被引：4，自引：0，他引：4  

殷先明  杜玉良  殷勇 《西北地质》2005,38(4):25-31

甘肃省花岗岩分布广泛，与其有关的矿产资源也十分丰富。笔者将甘肃省划分为北山、敦煌一阿拉善、祁连山及西秦岭4个构造-花岗岩-矿化区；进一步在北山、祁连山及西秦岭3个区划分出20个构造-花岗岩-矿化带；并就加强花岗岩成矿作用的研究和找矿工作提出了具体的工作思路与建议。  相似文献