Design of backfilled thin-seam coal pillars using earth pressure theory     

James G. Donovan  Mario G. Karfakis 《Geotechnical and Geological Engineering》2004,22(4):627-642

In underground coal mining any increase in coal recovery rate is dependent on a decrease in pillar size. Backfilling is one way of reducing the required size of pillars and hence the volume of coal left underground. Therefore any comparisons made between a self-supported mine layout and backfill supported mine layout are based directly on pillar design. The most effective way to examine the effect of backfill on pillar support, and subsequently the rate of recovery, would be to incorporate the mechanisms of backfill support directly into the current design procedure for coal pillars. This paper presents a review of the mechanics of backfill support, a method of estimating the magnitude of that support based on earth pressure theory, and an example that incorporates backfill support into current coal pillar design.  相似文献   

Genetic significance of fluid inclusions in the CSA Cu–Pb–Zn deposit, Cobar, Australia     

Alan D. Giles  Brian Marshall   《Ore Geology Reviews》2004,24(3-4):241

CSA mine exploits a ‘Cobar-type’ Cu–Pb–Zn±Au±Ag deposit within a cleaved and metamorphosed portion of the Cobar Supergroup, central New South Wales. The deposit comprises systems of ‘lenses’ that encompass veins, disseminations and semi-massive to massive Cu–Pb–Zn ores. The systems and contained lenses truncate bedding, are approximately coplanar with regional cleavage and similarly oriented shear zones and plunge parallel to the elongation lineation. Systems have extreme vertical continuity (>1000 m), short strike length (400 m) and narrow width (100 m), exhibit vertical and lateral ore-type variation and have alteration haloes. Models of ore formation include classical hydrothermalism, structurally controlled remobilisation and polymodal concepts; syntectonic emplacement now holds sway.Fluid inclusions were examined from quartz±sulphide veins adjacent to now-extracted ore, from coexisting quartz–sulphide within ore, and from vughs in barren quartz veins. Lack of early primary inclusions precluded direct determination of fluids associated with D₂–D₃ ore and vein emplacement. Similarly, decrepitation (by near-isobaric heating) of the two oldest secondary populations precluded direct determination of fluid phases immediately following D₂–D₃ ore and vein emplacement. Post-decrepitation outflow (late D₃ to early post-D₃) is recorded by monophase CH₄ inclusions. Entrained outflow of deeply circulated meteoric fluid modified the CH₄ system; modification is recorded by H₂O+CH₄ and H₂O+(trace CH₄) secondary populations and by an H₂O+(trace CH₄) primary population. The contractional tectonics (D₂–D₃) of ore emplacement was superseded by relaxational tectonics (D_4P) that facilitated meteoric water penetration and return flow.Under D₂ prograde metamorphism, entrapment temperatures (Tt) and pressures (Pt) for pre-decrepitation secondary inclusions are estimated as Tt300–330 °C and Pt1.5–2 kbar≈Plith (the lithostatic pressure). Decrepitation accompanied peak metamorphism (T350–380 °C) in mid- to late-D₃, while in late-D₃ to early post-D₃, essentially monophase CH₄ secondary inclusions were entrapped at Tt350 °C and Pt=1.5–2 kbar≈Plith. Subsequently, abundant CH₄ and entrained meteoric water were entrapped as H₂O+CH₄ secondaries under slowly decreasing temperature (Tt330–350 °C) and constant pressure (Pt1.5–2 kbar). Finally, with increasingly dominant meteoric outflow, H₂O+(trace CH₄) populations record decreasing temperatures (Tt>300 to <350 down to 275–300 °C) at pressures of Phydrostatic<Pt (1 kbar) <Plith (1.5 kbar).The populations of inclusions provide insight into fluid types, flow regimes and P–T conditions during parts of the deposit's evolution. They indirectly support the role of basin-derived CH₄ fluids in ore formation, but provide no insight into a basement-sourced ore-forming fluid. They fully support post-ore involvement of meteoric water. The poorly constrained entrapment history is believed to span 10 Ma from 395 to 385 Ma.  相似文献   

四川某矿山边坡失稳机理及稳定性评价   总被引：1，自引：1，他引：1  

胡卸文  吕小平  李廷强 《山地学报》2004,22(2):224-229

四川某矿山开采边坡迄今已有30余年,随采区规模的逐渐扩大,在矿区南坡构成一典型的顺层开挖边坡,因矿层中夹有不同数量的软弱夹层,在边坡前缘破坏坡角、并加上降雨及爆破振动影响,时常发生颁层滑坡,不仅给矿山人民生命财产带来严重危害,而且也严重制约矿山的正常发展。通过对典型开挖边坡所在部位的工程地质条件凋查,在确定影响边坡稳定的主要控制因素和边界条件的基础上。考虑四种工况条件下的稳定性分析和评价,为矿山下一步施工提出了较为合理的开挖方案。  相似文献   

大功率激电测深法寻找焦家式深部金矿床的试验应用研究     

牛如宝  陈长峰  宋海平  王友芳  王轮吉 《应用地球物理》2005,2(1):51-55

利用大功率的激电测深法可以寻找焦家式深部金 矿。首先,由物理和数学推导建立多层极化体的数 理模型,其数理模型产生的极化场可由多层若干 个极化单元场相叠加而成。由多次去除极化单元 场的原理而导出大功率激电测深资料进行消除浅 部强激电干扰异常的数据处理公式,从而突出了 深部矿床的激电异常。并利用处理后的激电测深 曲线,定量求取了深部金矿蚀变矿化带的顶界面 埋深。  相似文献   

The Quantitative Identification of Regional Mine and Natural Earthquakes and Its Application     

Liu Xiqiang 《中国地震研究》2005,19(3):269-281

INTRODUCTIONThe structural mine earthquake in coal mines refers to the quake induced by excavationengineeringthatleadstorupturingor change of geological structure and weakness surfaceintheinteriorof rock mass.According to the origin,mine earthquakes can b…  相似文献   

吉林海沟金矿矿山地质环境及其恢复治理方法   总被引：1，自引：0，他引：1  

孙春  赵洪满  程明华 《吉林地质》2005,24(3):61-65

在对海沟金矿矿山地质环境调查基础上，针对矿区存在着的问题，提出了治理与防范措施，对同类矿山有借鉴作用。  相似文献   

宁东煤田枣泉矿井综合物探效果     

李新安 《中国煤田地质》2005,17(4):50-53

为探明宁东煤田枣泉矿井首采区煤层自然范围及充水性，根据采区内地球物理物征，采用高精度磁法，直流电测深法和激发极化法进行综合勘探。在磁法勘探中结合测区曲线特征，建立数据体模型，正演计算烧变岩边界；电法勘探利用烧变岩含水后电阻率降低的特征确定其含水范围及富水性。  相似文献   

Direct Current Plasma Emission Spectrometric Determination of Major, Minor and Trace Elements in Microwave Oven Acid Leachates of Powdered Whole Coal Samples     

Sandro Fadda 《Geostandards and Geoanalytical Research》2005,29(1):143-156

Major concentrations of Al₂O₃, Fe₂O₃, MgO, CaO, Na₂O and K₂O, minor levels of TiO₂, P₂O₅ and thirty petrologically, geochemically and environmentally significant trace elements have been determined in microwave oven acid leachates of whole powdered coal samples by direct current plasma‐atomic emission spectrometry (DCP‐AES). A single sample preparation procedure was suitable for all the determinations with no additional dilution step for major elements solution. Dried samples (0.5 g) were treated in low‐pressure PFA digestion vessels with HF/HCl/HNO₃/HClO₄ acids to quantitatively extract the analytes from the bulk material, while leaving the major part of organic matrix as a residue. The major constituents of geological samples, in particular the easily ionised elements (EIEs) such as alkali and alkaline earths, may complicate the instrumental determinations in DCP‐AES because of differential enhancements of elemental emission intensities and stray light interferences. Taking account of these factors, the coal matrix is considered to have very low major oxide totals as compared to many other common geo‐environmental and related materials (rocks, sediments, soil, ashes etc.). The sample size employed here, while yielding a relatively concentrated solution to cover a wide range of elemental determinations, provided a sample matrix that significantly diminished interferences for DCP measurements. The need for closely matching the unknowns and calibrators was eliminated except for overall acidity and an excess quantity of caesium for EIE buffering. Calibration of the spectrometer was accomplished by simple aqueous single element solutions as high concentration calibrators in addition to a reagent blank as a low concentration calibrator. Two point working curves were established to allow for the maximum concentrations of each element expected in the unknowns. The precision of determinations under routine conditions as well as the reproducibility of the leaching and precision of instrumental measurements have been evaluated. Relative standard deviations (RSD) were of 1–2% for those elements whose concentrations in solid samples were well above the limits of quantification. Method detection limits in the buffered solutions were also evaluated. To evaluate the accuracy of the microwave oven‐DCP method a suite of eight certified coal reference materials of differing rank, were analysed with good agreement with the certified and/or available published data. Results are presented for the uncertified major oxides in the AR series reference materials.  相似文献   

K-Ar Ages of Granitic Magmatism and Related Pegmatite Formation at the Umanotani-Shiroyama Mine, Shimane Prefecture, SW Japan and Their Bearings on Cooling History     

Shouji Kihara    Kenichi Hoshino    Makoto Watanabe    Hirotsugu Nishido  Shunso Ishihara 《Resource Geology》2005,55(2):123-129

Abstract. The Umanotani-Shiroyama pegmatite deposits, the largest producer of K-feldspar and quartz in Japan, are of typical granitic pegmatite. Ilmenite-series biotite granite and granite porphyry, hosting the ore deposits, and biotites separated from these rocks yielded K-Ar ages ranging from 89.0 to 81.4 Ma and 95.2 to 93.7 Ma, respectively. Muscovite and K-feldspar separated from the ore zone yielded K-Ar ages with the range of 96.2 to 93.1 Ma and 87.3 to 80.7 Ma, respectively. Muscovites from quartz-muscovite veins in the ore zone and in the granite porphyry yielded K-Ar ages of 90.4 and 76.3 Ma, respectively. K-feldspar is much younger in age than coexisting muscovite. It is noted that the K-Ar ages of biotite separates and the whole-rock ages are identical to those of muscovite and K-feldspar in the ore zone, respectively. These time relations, as well as field occurrence, indicate that the formation of the pegmatite deposits at the Umanotani-Shiroyama mine is closely related in space and time to a series of granitic magmatism of ilmenite-series nature. Using closure temperatures of the K-Ar system for biotite and K-feldspar (microcline), cooling rate of the pegmatite deposits is estimated to be about 82C/m.y. at the beginning, but slowed down to about 15C/m.y. in the later period.  相似文献   

Sorption of carbon dioxide–methane mixtures     

Grayna Ceglarska-Stefa&#x;ska  Katarzyna Zar&#x;bska 《International Journal of Coal Geology》2005,62(4):211-222

The paper reports the results of experiments concerning the sorption/desorption processes, observed under laboratory conditions, in two types of coal extracted from operational coal-mines in Poland, using CH₄ and CO₂ to observe their relative inter-reaction with the coal samples when introduced in varying proportions and conditions. Numerous studies concerning the sorption/desorption phenomena have described the operational mechanisms and the relationship of mine gases to the organically-created coal-body in mines. The differences in the behaviour of certain gases is twofold: firstly the essentially different characteristics of CO₂ and CH₄, and secondly the structure of the coal-bed itself: its degree of metamorphism and content of macerals. From the results yielded, it was observed that the divergence of the isotherms of sorption of CH₄ and other gases in comparison with the isotherms of sorption of CO₂ and a CO₂/CH₄ mixture differed and that the curve on the sorption isotherm was more clearly distinct after the introduction of CO₂ molecules to the system: coal with a higher degree of metamorphism—CH₄, which is closely related to the rigidity of the structure according to the level of metamorphism. Since coals with higher carbon content exhibit lower molecular bonding than low-carbonised coals, the characteristic feature of the bonds in the first case is their mobility. Knowledge of the physical and chemical properties of hard coals, as well as their interaction with mining gases, is of great use in solving problems concerned with the extraction of methane from mines or its storage in goafs.  相似文献