深部盐矿勘探钻井液研究与应用   总被引：2，自引：0，他引：2       下载免费PDF全文

黄河  乌效鸣  景龙  常林祯  刘超  李伟 《盐湖研究》2016,24(4):16-22

ZK001井钻遇地层为大段泥岩,部分地层为页岩、含盐泥岩、盐膏层。在泥页岩地层进行大口径全面钻进,钻速较快,固控设备能力有限,引起钻屑中粘土颗粒重复性膨胀、软化及裂解分散,最终可能造成粘土侵,对井内安全造成威胁。深部岩膏层易溶于水,从而导致盐层蠕变、井径扩大、井壁失稳等问题。以ZK001井为例,通过优化钻井液体系及现场施工工艺,解决了地层强造浆、盐层失稳等问题。通过岩石力学测试、阳离子交换容量测试、钻井液体系优选及性能测试,确定了上部地层采用聚合物钻井液体系,下部含盐层取芯钻进转换为饱和盐水钻井液体系。通过选用合适的钻井液密度、粘度、切力量、滤失量、含盐量等指标,可以有效控制上部泥岩井壁稳定、含盐层蠕变、井径扩大的问题。钻进过程中钻井液性能稳定且易于维护,从而保证了钻进工作安全、高效、顺利的进行。  相似文献   

The effect of specimen diameter size on uniaxial compressive strength,P-wave velocity and the correlation between them     

Amin Jamshidi  Mashalah Khamehchiyan  Reza Zarei Sahamieh 《Geomechanics and Geoengineering》2016,11(1):13-19

Estimation of uniaxial compressive strength (UCS) by P-wave velocity (V_P) is of great interest to geotechnical engineers in various design projects. The specimen diameter size is one of the main factors that influence rock parameters such as UCS and V_P. In this study, the diameter size of specimens that effect UCS and V_P is investigated. Moreover, the correlation between UCS and V_P are examined via empirical analysis. For this purpose, 15 travertine samples were collected and core specimens with a diameters size of 38, 44, 54, 64 and 74 mm were prepared. Then, uniaxial compressive strength and P-wave velocity tests were conducted according to the procedure suggested by ISRM (1981). It is concluded that the diameter size of the specimen has a significant effect on UCS and V_P. Moreover, it was found that the best correlation between relevant parameters obtained for the specimen diameter of 38 mm.  相似文献   

Effects of Column Diameter on Setting Behavior of Dredged Slurry in Sedimentation Experiments     

Yu-Feng Gao  Yuan Zhou  Da-yong Li 《Marine Georesources & Geotechnology》2016,34(5):431-439

This article investigates the influence of dimensions of a settling column on the settling mode and the settling rate. End conditions of the settling stage in the hindered settling were also analyzed. It was found that the settling mode in a column with a smaller diameter tends to be consolidation settling. The effect of a settling column wall decreases with increasing column diameter, and it can be ignored provided the column diameter is larger than 14.5 centimeters. For the difference in initial water content, the settling behavior of the slurry develops a different sensitivity to the diameter effect. The influence of column diameter reduces as the initial water content of the slurry becomes higher. It is suggested that the internal diameter of the column used in a sedimentation experiment should be 14.5 centimeters.  相似文献   

阜阳华纺新天地超长空桩成孔施工控制措施          下载免费PDF全文

邢敏 《探矿工程》2018,45(6):89-91

阜阳华纺新天地桩基工程,原计划基坑底面施工调整为地面施工,增加了近14 m的空桩。为此,工程桩施工质量存在桩位、孔底沉渣厚度、钢筋笼位置、砼质量、砼桩顶标高等方面控制的相关问题。本文介绍了其施工情况,其经验可供类似工程借鉴。  相似文献   

基于LabView的松科2井项目管理系统          下载免费PDF全文

张恒春  闫家  谈晓丽  孟庆鸿  王稳石  曹龙龙  朱永宜  许洁 《探矿工程》2018,45(10):171-176

松科二井2013年正式启动,2018年5月完井,历时6年,最终井深7018 m。项目执行过程中,形成合同700多个、文件200多个、汇款流水1000多笔、报账流水1600多笔。针对松科二井合同、文件繁多,财务流程繁杂,涉及项目多的特点,基于LabVIEW平台设计了一套项目管理系统。该系统可全程记录松科二井上述合同、文件、汇款和报账信息,建立合同及对应批次汇款和报销的勾稽关系,具有模糊查询、修改、超链接等功能。  相似文献   

Main technical innovations of Songke Well No.2 Drilling Project     

《China Geology》2018,1(2):187-201

Songke Well No.2, one of the main part of the scientific drilling project in Songliao Basin, which was drilled 7018 m and acquired the part of cores continuously from the Low Cretaceous to the Carboniferous and the Permian from the 2843 m deep, can be considered as the deepest continental drilling project in Asia. Aiming at the features of longer well sections, larger diameters and multiple spud-ins for coring of Songke Well No.2, this project broke through the “coring in small diameter and reaming in large diameter” spud-in drilling-completion procedures which are always used in large-diameter-well coring for continental scientific drilling projects in domestic and overseas and the drilling method of short-single-cylinder roundtrip footage. At the same time, “coring in the same diameter and completing drilling at one single diameter” was achieved at all φ311 mm and φ216 mm coring sections of more than one thousand meters long, high-efficient operation with “drilling long footage with drill tools combined in multi-cylinders” was achieved at deep coring section. Four world drilling records were created which include more than a thousand meters continuous coring at φ311 mm, and the footage per roundtrip footage at φ311 mm, φ216 mm and φ152 mm is all more than 30 m, all of these breakthroughs reduced at least 300 days for this project; moreover, considering the characteristics of formations that the geothermal gradient is high in the drilled sections and the inside-well temperature is over 240°C after drilling completion, a formate-polymer water-based mud system was developed by compounding attapulgite and sodium bentonite and by adding independently developed high-temperature stabilizer, which can provide critical technical support for successful well completion at 7018 m in the super-high-temperature environment It is the first time that the water-based mud is operated at the working temperature higher than 240°C in China; Besides, considering the high-quality requirement on cores imposed by the project, the method “mechanical cored is charge” to discharge core nondestructively on the ground was worked out, and more than 4000 m scatheless cores were discharged out of the drill pipes while maintaining original stratum structures.  相似文献   

测井地质学前世、今生与未来——写在《测井地质学·第二版》出版之时     

赖锦  王贵文  庞小娇  韩宗晏  李栋  赵仪迪  王松  江程舟  李红斌  黎雨航 《地质论评》2021,67(5):67060005-67060005

测井地质学以地质学和测井学的方法理论为指导,综合运用各种测井信息,来解决基础地质和石油地质的地质问题。经过数十年发展,测井地质学在油气勘探开发各个环节得到广泛应用。非常规油气的兴起使得测井地质学正面临多重挑战和全新探索,亟需建立针对非常规油气的测井地质学综合方法理论体系。本文以《测井地质学·第二版》出版为契机,系统归纳了测井地质学的起源及发展历程、主要研究内容和研究方法流程。然后总结了测井资料与地震、地质信息的匹配性,并分析了不同探测特性测井方法纵向分辨率区间特征。在此基础上评述了测井地质学在井旁构造解析、沉积学特征研究、层序地层划分、地应力方向判别及大小计算、井壁裂缝识别与评价、烃源岩评价以及非常规油气“七性关系”综合评价当中的应用。但由于测井资料的负载能力有限性、测井与地质信息属性不对应性以及测井资料本身的多解性,使得测井地质学在测井—地质转换、非常规油气测井评价及其与人工智能融合方面还存在一定的问题。因此加强基础岩石物理研究,挖掘测井曲线中包含的地质信息,并与人工智能相结合,将拓展测井地质学研究的精度和广度,从而使其未来可更好地应用至非常规油气测井评价等实践工作中。  相似文献   

大口径绳索取心钻进工艺在页岩气地质调查川蔺参1井中的应用          下载免费PDF全文

蒋太平  李果民  肖华  沈林江 《探矿工程》2021,48(S1):269-274

为了获取参数井压裂设计的相关参数,需要对井眼进行阵列声波测井和微侧向电阻率测井,需要采取大直径岩心进行力学实验。采用固体岩心钻探取心工艺,钻孔口径难以达到物探测井仪器入井要求,岩心直径也不能满足实验要求,必须采用大口径取心工艺才能满足设计要求。同时,常规取心工艺难以满足页岩气勘探对岩心（页岩或者煤心）提升时间的要求,绳索取心工艺在这方面优势明显。本篇介绍了大口径绳索取心工艺在页岩气地质调查井川蔺参1井的成功应用,根据大口径绳索取心钻具的结构特点,结合目的层岩性特征,总结了合理的取心钻进工艺参数和技术保障措施,取得了较好的效果。  相似文献   

白涧铁矿南区复杂地层钻探施工技术          下载免费PDF全文

李红梅  石逊 《探矿工程》2021,48(11):30-35

邢台白涧铁矿南区地层岩石破碎、部分地层含角砾、胶结性差、漏失严重,钻探施工中存在掉块卡钻、缩径、坍塌、埋钻及孔内泥浆全部漏失等难题。通过优化钻孔结构、使用新工艺、新方法,合理选择钻进参数,采用绳索取心钻进配合预留技术套管,有效解决了上部煤系地层的坍塌问题;采用反丝套管的方法,极大地减轻了由于地层缩径、掉块引起的套管下不到位、起拔困难等风险;常规型绳索取心钻杆替代套管方法的采用,提高了含角砾、松散地层的穿过速度,减少了钻探工作量的报废,加快了施工进度;特别是高胎体双水口钻头的使用,提高了钻进效率,节约了钻探施工成本,项目得以如期完成。  相似文献   

新型同径分层止水工艺在地热探采深井的应用          下载免费PDF全文

杨联锋  段云星 《探矿工程》2021,48(8):33-39

原平大营地热探采结合深井完钻井深3088 m,为探明494~3088 m变质岩地层的水文地质参数和水源补给情况,基于岩心和测井资料划分4个抽水试验段,且试验后需要恢复目的含水层。根据“一孔同径分层止水”原则,设计了管内止水托盘止水、管外止水伞止水的新型同径分层止水工艺。该工艺简化了井身结构,避免了管外投粘土球、注水泥等堵塞含水层的情况。现场实施表明,该工艺止水效果完全满足水文地质抽水试验要求,可为同类工程提供经验和借鉴。  相似文献