安徽庐枞火山岩盆地橄榄玄粗岩系的地球化学特征及其对下扬子地区晚中生代岩石圈减薄机制的约束   总被引：17，自引：2，他引：15  

薛怀民  董树文  马芳 《地质学报》2010,84(5):664-681

庐枞盆地内的中生代火山-潜火山岩具高钾和相对富碱为特性,属典型的橄榄玄粗岩系列。它们在地球化学上表现出明显富集Rb、Th、U、K等强不相容元素和轻稀土元素,亏损高场强元素Nb和Ta的特征。Nd、Sr同位素组成总体位于富集型的扬子克拉通岩石圈地幔的范围内或其附近,显示其母岩浆主要是由富集型地幔部分熔融形成的。火山-潜火山岩的成分变异趋势显示橄榄玄粗质幔源岩浆在高压下(斜长石稳定压力之下,1.5GPa)经历过以单斜辉石和钛铁氧化物为主的矿物分离结晶作用。低压下矿物的分离结晶作用及上地壳物质的混染则不明显。这套火山-潜火山岩的部分地球化学性质(如Ce/Yb比值)类似于大洋岛弧内的橄榄玄粗岩,可能意味着区内由于岩石圈的减薄,软流圈地幔上涌到了岩石圈相对较浅的部位,控制源区部分熔融的主要是尖晶石相地幔岩。虽然局部(如靠近郯庐断裂的盆地西缘)可能存在着明显的热侵蚀,但"突发性的"机械拆沉是区内(乃至整个长江中下游地区)岩石圈减薄的主要机制。在整个晚中生代岩石圈减薄的过程中,这两种机制可能一直相互促进着。  相似文献   

海南岛晚中生代花岗闪长岩及其包体的锆石U-Pb定年及构造意义   总被引：1，自引：0，他引：1       下载免费PDF全文

唐立梅  陈汉林  董传万 《地质科学》2014,(1):259-274

海南岛晚中生代的岩浆活动十分强烈,代表性的岩体有千家岩体、屯昌岩体和保城岩体,岩体岩性为花岗闪长岩,其中包含大量的闪长岩包体。系统的LA-ICP-MS锆石U-Pb定年结果表明,花岗闪长岩及包体均形成于101 Ma,为双峰式侵入岩,由来自地幔的高温基性岩浆注入下地壳较酸性的长英质岩浆,两种岩浆同时上侵冷却形成。它们形成的构造环境为板内拉张环境,指示了海南岛于101 Ma处于强烈的岩石圈减薄阶段,这与晚中生代太平洋板块俯冲引起的弧后拉张有关。  相似文献   

桂西古侵蚀沉积断面型金矿床   总被引：1，自引：0，他引：1  

陈开礼 《南方国土资源》2000,13(4):19-22

古侵蚀沉积间断面型金矿是桂西的主要金矿床类型.文章着重分析该类型金矿成矿地质条件,论述矿床成因及成矿机理,认为此类型金矿易采易冶,经济效益显著,建议加大开发力度.  相似文献   

From foredeep to orogenic wedge-top: The Cretaceous Songliao retroforeland basin,China     

《地学前缘(英文版)》2023,14(3):101527

Songliao Basin, the largest Mesozoic intracontinental nonmarine basin in eastern China, initiated during the latest Jurassic as a backarc extensional basin; rifting failed and thermal cooling controlled subsidence through the early Late Cretaceous. Integrating 2-D and 3D reflection seismic and borehole data with regional geological studies, we interpret sedimentary sequence and structural patterns of the Coniacian-Maastrichtian fill of Songliao Basin as defining a retroforeland basin system developed after 88 Ma (marked by the T11 unconformity in the basin), including (1) significant increase in the thickness of the Nenjiang Formation eastward towards orogenic highlands of the Zhangguangcai Range and the convergent continental margin; (2) a shift of detrital provenance in the basin from north to southeast; and (3) propagation of E-W shortened structures, increasing eastward in amplitude, frequency, and degree of inversion toward the orogen. During latest Cretaceous, foreland basin fill progressively deformed, as the foredeep evolved to a wedge-top tectonic setting, marked by the basin-wide T04 unconformity within the upper Nenjiang Formation at 81.6 Ma. Much of the basin was brought into the orogenic wedge and eroded by the end of the Cretaceous. Late Jurassic/Early Cretaceous backarc rifting of uncratonized basement comprised of accreted terranes likely facilitated and localized the foreland. Synrift normal faults reactivated and extensively inverted as thrust faults are prominent in the eastern 1/3 of the basin, whereas folds developed above detachments in shaley early post-rift strata dominate the western 2/3 of the basin. Songliao foreland development likely was driven by changing plate dynamics and collision along the Pacific margin after 88 Ma.  相似文献   

东昆仑夏日哈木镁铁质-超镁铁质岩体岩石成因与拉张型岛弧背景   总被引：13，自引：7，他引：6  

姜常义  凌锦兰  周伟  杜玮  王子玺  范亚洲  宋艳芳  宋忠宝 《岩石学报》2015,31(4):1117-1136

赋存超大型镍矿床的夏日哈木Ⅰ号岩体位于东昆仑造山带西段之东昆中早古生代岛弧带。锆石U-Pb年龄为439Ma,由分属橄榄岩相、辉石岩相、辉长-苏长岩相的多种岩石类型组成。堆晶结构与堆晶层理发育,属岩床状层状岩体。不平衡结晶作用在岩浆演化过程中居于主导地位。矿物结晶顺序为尖晶石/橄榄石→斜方辉石→单斜辉石→单斜辉石+斜长石→褐色普通角闪石。各种岩石均富集轻稀土元素和大离子亲石元素,亏损Nb、Ta、Ti、P,显示了岛弧环境岩浆岩的地球化学特征。Nd、Sr同位素组成均属富集型地幔范畴和EMⅡ型趋势。矿区内的Ⅲ号与Ⅳ号岩体属蛇绿岩套,证明在昆中岛弧带内部存在岩石圈破裂带。区域构造格局与演化历史以及区域地球物理场的研究表明,东昆中岛弧带属拉张型岛弧带。据此,可以认定拉张型岛弧环境是全球范围内第五种有利于形成镍矿床的构造环境,中古生代是我国第三个镍矿主成矿期。  相似文献   

河南省地壳结构和深断裂简述     

邬雪雁  李进先 《河南国土资源》1995,(2)

利用重磁资料正反演计算，获得了一系列的地壳深部资料。多种资料综合反映了河南省深部构造的主要特征。本文论述了我省地壳层状结构的特点和深断裂带的划分。首次提出黄河南断裂带、驻马店－桐柏断裂带为超壳断裂带；确山－固始断裂带、南阳断裂带为地壳断裂带。  相似文献   

Characterization, lateral variability and lateral extent of discontinuity surfaces on a Carbonate Platform (Barremian to Lower Aptian, Oman)   总被引：4，自引：0，他引：4  

UTE SATTLER  ADRIAN IMMENHAUSER  HEIKO HILLGÄRTNER†  MATEU ESTEBAN‡ 《Sedimentology》2005,52(2):339-361

Hiati of various duration in carbonates are commonly expressed as discontinuity surfaces. The understanding of processes that form and affect these surfaces leads to an improved sequence-stratigraphic interpretation, a reliable outcrop correlation, and better models for reservoir compartmentalization. Various intraformational discontinuities were analysed and interpreted in a well-exposed study window, 2·5 km in lateral length and 60 m in height comprising the Barremian-Aptian Qishn Formation (Haushi-Huqf area, central Oman). This study focuses on the lateral extent and morphology of the surfaces, the petrography of the underlying rocks, and the facies changes and geochemical trends across these discontinuities. Furthermore, the lateral variability of discontinuity surfaces was documented. Three genetic types of discontinuities are differentiated: (i) erosion surfaces; (ii) omission surfaces (hard- and firmgrounds); and (iii) composite surfaces with evidence for both subaerial exposure and submarine boring. Field observations, combined with petrographic and geochemical data, suggest that 17 surfaces are laterally extensive for at least 20 km and record relative sea-level fluctuations of regional scale. In contrast, a large number of laterally limited surfaces (<1 km) are related to locally active processes such as waves and current erosion. The lateral variability along extensive surfaces is the result of the depositional environment below the discontinuity, the sea-floor topography, waves and currents and differential erosion. The most pronounced lateral variability is present along six laterally extensive composite surfaces that record terrestrial exposure and subsequent flooding of a tidal flat environment. This variability is caused by spatial variability in the tidal flat environment, meteoric alteration and differential erosion. This study emphasizes the spatial and temporal complexity of processes that form and modify discontinuity surfaces. This variability must be kept in mind when interpretations and correlations are based on one-dimensional sections or cores.  相似文献   

Geochemical and O-isotope constraints on the evolution of lithospheric mantle in the Ross Sea rift area (Antarctica)     

Cristina?PerinelliEmail author  Pietro?Armienti  Luigi?Dallai 《Contributions to Mineralogy and Petrology》2006,151(3):245-266

Peridotite xenoliths found in Cenozoic alkali basalts of northern Victoria Land, Antarctica, vary from fertile spinel-lherzolite to harzburgite. They often contain glass-bearing pockets formed after primary pyroxenes and spinel. Few samples are composite and consist of depleted spinel lherzolite crosscut by amphibole veins and/or lherzolite in contact with poikilitic wehrlite. Peridotite xenoliths are characterized by negative Al₂O₃–Mg# and TiO₂–Mg# covariations of clino- and orthopyroxenes, low to intermediate HREE concentrations in clinopyroxene, negative Cr–Al trend in spinel, suggesting variable degrees of partial melting. Metasomatic overprint is evidenced by trace element enrichment in clinopyroxene and sporadic increase of Ti–Fe_tot. Preferential Nb, Zr, Sr enrichments in clinopyroxene associated with high Ti–Fe_tot contents constrain the metasomatic agent to be an alkaline basic melt. In composite xenoliths, clinopyroxene REE contents increase next to the veins suggesting metasomatic diffusion of incompatible element. Oxygen isotope data indicate disequilibrium conditions among clinopyroxene, olivine and orthopyroxene. The highest δ¹⁸O values are observed in minerals of the amphibole-bearing xenolith. The δ¹⁸O_cpx correlations with clinopyroxene modal abundance and geochemical parameters (e.g. Mg# and Cr#) suggest a possible influence of partial melting on oxygen isotope composition. Thermobarometric estimates define a geotherm of 80°C/GPa for the refractory lithosphere of NVL, in a pressure range between 1 and 2.5 GPa. Clinopyroxene microlites of melt pockets provide P–T data close to the anhydrous peridotite solidus and confirm that they originated from heating and decompression during transport in the host magma. All these geothermometric data constrain the mantle potential temperature to values of 1250–1350°C, consistent with the occurrence of mantle decompressional melting in a transtensive tectonic regime for the Ross Sea region.  相似文献   

台站迁移对陕西省气温资料均一性的影响及其偏差订正     

魏娜  孙娴  姜创业  程肖侠 《气象》2012,38(12):1532-1537

利用陕西省74个台站1961-2008年气温资料和台站沿革资料,采用二相回归法进行均一性检测和订正。结果发现台站迁移对气温资料的均一性有明显的影响,陕北台站迁移较少,关中和陕南迁站较多,全省74个台站中有24个台站资料的非均一性是因为台站迁移而引起的,对其中的12个台站进行了调整,使得全省气温序列从南至北分布具有较好的‘均一性’。  相似文献   

Lithospheric flexure, uplift and expected horizontal strain rate in the Pannonian Carpathian region     

Alessandro Caporali   《Tectonophysics》2009,474(1-2):337

The Apuseni Mountains are located between the Pannonian Basin and the Transylvanian Basin along a direction of SE convergence with the Carpathian belt. A flexural model based on the cylindrical bending of a semi-infinite, isostatically supported, thin elastic plate is here examined with the Apuseni playing the role of flexural bulge, and under the assumption that the plate is deforming under the action of a vertical shear force and a bending moment applied at the end of the plate, beneath the Carpathians. The model yields estimates of the plate thickness ranging between 13 and 14.5 km, depending on the assumed density contrast between crust/sediments and mantle providing buoyancy. The vertical shear force which is necessary to bend the plate is in the range between 60 and 300 × 10¹¹ N m^− 1, depending on the assumed density contrast. This force is shown to be modelled by a gravitational ‘slab pull’ force, using model parameters derived from seismic tomography. If the height of the flexural bulge, after correction for erosion, is allowed to increase, the model yields an estimate of the horizontal strain rate at the top of the bulge. For example, 5 mm/yr vertical change of the flexural bulge of a 14 km thick plate results in a horizontal deformation rate of approximately 7 nanostrain/yr at the top of the bulge, a value which is at the threshold of sensitivity of continuous GPS measurements. Different vertical rates will change the horizontal strain rate almost proportionally.  相似文献