Grain coarsening in contact metamorphic carbonates: effects of second-phase particles, fluid flow and thermal perturbations   总被引：3，自引：0，他引：3  

A. Berger  M. Herwegh 《Journal of Metamorphic Geology》2004,22(5):459-474

Under contact metamorphic conditions, carbonate rocks in the direct vicinity of the Adamello pluton reflect a temperature‐induced grain coarsening. Despite this large‐scale trend, a considerable grain size scatter occurs on the outcrop‐scale indicating local influence of second‐order effects such as thermal perturbations, fluid flow and second‐phase particles. Second‐phase particles, whose sizes range from nano‐ to the micron‐scale, induce the most pronounced data scatter resulting in grain sizes too small by up to a factor of 10, compared with theoretical grain growth in a pure system. Such values are restricted to relatively impure samples consisting of up to 10 vol.% micron‐scale second‐phase particles, or to samples containing a large number of nano‐scale particles. The obtained data set suggests that the second phases induce a temperature‐controlled reduction on calcite grain growth. The mean calcite grain size can therefore be expressed in the form D = C₂ e^Q*/RT(d_p/f_p)^m*, where C₂ is a constant, Q* is an activation energy, T the temperature and m* the exponent of the ratio d_p/f_p, i.e. of the average size of the second phases divided by their volume fraction. However, more data are needed to obtain reliable values for C₂ and Q*. Besides variations in the average grain size, the presence of second‐phase particles generates crystal size distribution (CSD) shapes characterized by lognormal distributions, which differ from the Gaussian‐type distributions of the pure samples. In contrast, fluid‐enhanced grain growth does not change the shape of the CSDs, but due to enhanced transport properties, the average grain sizes increase by a factor of 2 and the variance of the distribution increases. Stable δ¹⁸O and δ¹³C isotope ratios in fluid‐affected zones only deviate slightly from the host rock values, suggesting low fluid/rock ratios. Grain growth modelling indicates that the fluid‐induced grain size variations can develop within several ka. As inferred from a combination of thermal and grain growth modelling, dykes with widths of up to 1 m have only a restricted influence on grain size deviations smaller than a factor of 1.1. To summarize, considerable grain size variations of up to one order of magnitude can locally result from second‐order effects. Such effects require special attention when comparing experimentally derived grain growth kinetics with field studies.  相似文献   

The magmatic–hydrothermal transition—evidence from quartz phenocryst textures and endoskarn abundance in Cu–Zn skarns at the Empire Mine, Idaho, USA     

Zhaoshan Chang  L.D. Meinert 《Chemical Geology》2004,210(1-4):149-171

Information about the magmatic to hydrothermal transition is preserved in late-stage features of quartz phenocrysts and endoskarn alteration in some Cu–Zn skarn deposits such as the Empire Mine in Idaho. Important features include: (1) quartz phenocrysts with strong resorption textures such as vermicular zones of igneous groundmass cutting primary quartz cathodoluminescence banding, (2) anomalous amounts of endoskarn (more than 50% of mineralized rock), (3) high F activities as evidenced by fluorite as an accessory mineral in igneous rocks, in alteration assemblages, and in fluid inclusions and by high F in hydroxyl sites in igneous biotite and amphibole, and (4) direct association of Zn, which normally is deposited distally at low temperature, with Cu in proximal locations and in endoskarn. These features are explained by the following model: (1) F lowers the solidus temperature of the magma, thus changing the timing, temperature, and duration of hydrothermal fluid exsolution. (2) Upon magmatic vapor saturation the F-rich hydrothermal fluids form bubbles that adhere to quartz phenocrysts and chemically corrode/tunnel into the quartz forming vermicular resorption textures. (3) F-rich hydrothermal fluids also promote the formation of endoskarn; silicic rocks are attacked by F-rich fluids in the same sense that carbonate wall rocks are dissolved by weakly to moderately acidic hydrothermal fluids. (4) Low fluid exsolution temperature facilitated by high F activity promotes high Zn/Cu ratios in proximal locations due to the solubility of Zn relative to Cu at lower temperatures. This model may be applicable at other localities such as the world-class Cu–Zn skarn Antamina mine, as well as some tin and rapakivi granites.  相似文献   

The role of moisture cycling in the weathering of a quartz chlorite schist in a tropical environment: findings of a laboratory simulation   总被引：1，自引：0，他引：1  

Tony Wells  Philip Binning  Garry Willgoose 《地球表面变化过程与地形》2005,30(4):413-428

Long‐term weathering of a quartz chlorite schist via wetting and drying was studied under a simulated tropical climate. Cubic rock samples (15 mm × 15 mm × 15 mm) were cut from larger rocks and subjected to time‐compressed climatic conditions simulating the tropical wet season climate at the Ranger Uranium Mine in the Northern Territory, Australia. Fragmentation, moisture content and moisture uptake rate were monitored over 5000 cycles of wetting and drying. To determine the impact of climatic variables, five climatic regimes were simulated, varying water application, temperature and drying. One of the climatic regimes reproduced observed temperature and moisture variability at the Ranger Uranium Mine, but over a compressed time scale. It is shown that wetting and drying is capable of weathering quartz chlorite schist with changes expected over a real time period of decades. While wetting and drying alone does produce changes to rock morphology, the incorporation of temperature variation further enhances weathering rates. Although little fragmentation occurred in experiments, significant changes to internal pore structure were observed, which could potentially enhance other weathering mechanisms. Moisture variability is shown to lead to higher weathering rates than are observed when samples are subjected only to leaching. Finally, experiments were conducted on two rock samples from the same source having only subtle differences in mineralogy. The samples exhibited quite different weathering rates leading to the conclusion that our knowledge of the role of rock type and composition in weathering is insufficient for the accurate determination of weathering rates. Copyright © 2005 John Wiley & Sons, Ltd.  相似文献   

鲁东南岚山头超高压变质岩流体包裹体特征与板片折返史     

范宏瑞  郭敬辉  胡芳芳  储雪蕾  金成伟 《岩石学报》2005,21(4):1125-1132

鲁东南岚山头含柯石英榴辉岩主要产于花岗质片麻岩内,是苏鲁超高压变质带主要榴辉岩体密集分布区之一。流体包裹体研究表明,榴辉岩矿物及细脉石英中捕获有四种类型包裹体:在超高压-高压榴辉岩相条件下捕获的 N_2±CO_2包裹体;在高压榴辉宕重结晶阶段被捕获的 CO_2-H_2O 包裹体和含子矿物高盐度 H_2O 溶液包裹体:在超高压岩石折返过程中的最晚(角闪岩相退变质甚至更晚)阶段捕获的低盐度 H_2O 溶液包裹体。利用榴辉岩矿物及脉体石英中捕获的流体包裹体相互期次关系,可以对本区超高压变质作用板片折返过程中的流体演化史进行重建。  相似文献   

The initiation and development of metamorphic foliation in the Otago Schist, Part 2: evidence from quartz grain-shape data   总被引：1，自引：0，他引：1  

A. STALLARD  D. SHELLEY  S. REDDY 《Journal of Metamorphic Geology》2005,23(6):443-459

Shape, size and orientation measurements of quartz grains sampled along two transects that cross zones of increasing metamorphic grade in the Otago Schist, New Zealand, reveal the role of quartz in the progressive development of metamorphic foliation. Sedimentary compaction and diagenesis contributed little to the formation of a shape‐preferred orientation (SPO) within the analysed samples. Metamorphic foliation was initiated at sub‐greenschist facies conditions as part of a composite S1‐bedding structure parallel to the axial planes of tight to isoclinal F1 folds. An important component of this foliation is a pronounced quartz SPO that formed dominantly by the effect of dissolution–precipitation creep on detrital grains in association with F1 strain. With increasing grade, the following trends are evident from the SPO data: (i) a progressive increase in the aspect ratio of grains in sections parallel to lineation, and the development of blade‐shaped grains; (ii) the early development of a strong shape preferred orientation so that blade lengths define the linear aspect of the foliation (lineation) and the intermediate axes of the blades define a partial girdle about the lineation; (iii) a slight thinning and reduction in volume of grains in the one transect; and (iv) an actual increase in thickness and volume in the survivor grains of the second transect. The highest‐grade samples, within the chlorite zone of the greenschist facies, record segregation into quartz‐ and mica‐rich layers. This segregation resulted largely from F2 crenulation and marks a key change in the distribution, deformation and SPO of the quartz grains. The contribution of quartz SPO to defining the foliation lessens as the previously discrete and aligned detrital quartz grains are replaced by aggregates and layers of dynamically recrystallized quartz grains of reduced aspect ratio and reduced alignment. Pressure solution now affects the margins of quartz‐rich layers rather than individual grains. In higher‐grade samples, therefore, the rock structure is characterized increasingly by segregation layering parallel to a foliation defined predominantly by mica SPO.  相似文献   

Hydrothermal Quartz Vein Formation, Revealed by Coupled SEM-CL Imaging and Fluid Inclusion Microthermometry: Shuteen Complex, South Gobi, Mongolia     

Bayaraa Batkhishig    Greg Bignall  Noriyoshi Tsuchiya 《Resource Geology》2005,55(1):1-8

Abstract. Scanning electron microscopy-cathodoluminescence (SEM-CL) imaging of vein quartz in the Cu-mineralised, Shuteen Complex (South Gobi, Mongolia) has revealed a complex history of crystal growth, dissolution and microfracture healing, associated with several hydrothermal events that could not be detected using other observational techniques (e.g. transmitted/reflected light microscopy, back-scattered electron imaging, or secondary electron imaging).
The quartz initially grew as CL-bright/grey crystals in a 345±30C liquid reservoir, as inferred by the analysis of primary liquid fluid inclusions (average Th of 343C; 6.6∼7.7 wt% NaCl_eq). Quartz precipitation occurred at the edge of the crystals as reservoir fluids cooled to 260±25C, as indicated by micron-scale CL-dark/CL-bright quartz growth bands containing abundant fluid inclusions (with an average T_h values of 261C). Pressure fluctuations were the likely cause of dissolution, as SEM-CL imaging reveals the quartz have corroded or rounded crystal edges, and precipitation of later quartz into open space. SEM-CL imaging shows the quartz contains healed microfractures that trapped low salinity fluids (3.9 wt% NaC1_eq) with Th values of 173±15C.
SEM-CL imaging provides a means of deciphering the thermal and chemical evolution of the fossil Shuteen hydrothermal system, and the nature of hydrothermal quartz vein-forming processes, by facilitating the correlation of distinct fluid inclusion populations and their relative chronology, with specific hydrothermal events.  相似文献   

PRESSURE GRADIENT FROM THE CONTRIBUTION OF BOTH GEOTHERMAL AND GRAVITY IN THE LITHOSPHERE     

HU Baoqun LU Guxian WANG Fangzhang SUN Zhanxue LIU Chengdong BAI Lihong 《大地构造与成矿学(英文版)》2005,29(2):128-138

1 Introduction The pressure, a scalar quantity, is defined as P = F/S (F is force, S is the area for F) which can be widely used for both solid and fluid. The formula P = g ρh (g-gravitation acceleration,ρ-density, h-depth) is only used for even density static solid and fluid. The delivery of pressure in the fluid follows the law of Pascal, and the average pressure of uneven density fluid can be calculated with the formula of P = g ρh. The temperature influence on pressure is notHU Ba…  相似文献   

内蒙古大青山-乌拉山地区孔兹岩系的早期变质地层结构——下地壳近水平顺层滑脱变形的产物   总被引：4，自引：0，他引：4  

徐仲元刘正宏  杨振升 《地层学杂志》2005,29(11):423-432

近年来孔兹岩系作为高级变质岩区一套特征性的变质沉积岩石组合而受到广泛关注，但其变质地层结构及其相关的构造作用和构造样式还不为人所了解。通过对内蒙古大青山一乌拉山地区以孔兹岩系发育为特征的高级变质杂岩的研究发现，区内孔兹岩系自下而上由3个岩石地层单位组成：榴云片麻岩岩组、透辉片麻岩岩组和大理岩岩组，表现出由细碎屑沉积-碎屑沉积和钙质化学沉积的混合物-镁质碳酸盐组成的沉积旋回。这些变质地层不仅遭受到具有近等温降压顺时针P-T演化特征的麻粒岩相变质作用的改造，同时，还遭受到近水平顺层滑脱变形构造、穹-褶构造和近东西向陡倾叶理带这三种构造形式为主的多期变形的改造。由此，这些变质地层在空间上多以不规则条带状、不规则团块状或透镜状形式出露，同时，各地层单位在空间上具有“犬牙交错，参差产出”，“岩层缺失，隔层相触”的特征。研究结果表明，区内孔兹岩系目前的产出状态及“犬牙交错，参差产出”的特征是穹-褶构造尤其是近东西向陡倾叶理带叠加改造的结果，在消除其改造的影响后可以确定，由于近水平顺层滑脱变形改造的结果，这些变质地层发生“岩层缺失，隔层相触”，在空间上表现为以近水平的长轴近东西向的扁豆体堆叠而成的早期变质地层结构，这是高级变质地层所特有的变质地层结构。  相似文献   

Mineralogy and geochemistry of a Late Permian coal in the Dafang Coalfield, Guizhou, China: influence from siliceous and iron-rich calcic hydrothermal fluids   总被引：16，自引：2，他引：16  

Shifeng Dai  Chen-Lin Chou  Mei Yue  Kunli Luo  Deyi Ren   《International Journal of Coal Geology》2005,61(3-4):241-258

This paper describes the influence of siliceous and iron-rich calcic low-temperature hydrothermal fluids (LTHF) on the mineralogy and geochemistry of the Late Permian No. 11 Coal (anthracitic, R_r=2.85%) in the Dafang Coalfield in northwestern Guizhou Province, China. The No. 11 Coal has high contents of vein ankerite (10.2 vol.%) and vein quartz (11.4 vol.%), with formation temperatures of 85 and 180 °C, respectively, indicating that vein ankerite and vein quartz were derived from low-temperature calcic and siliceous hydrothermal fluids in two epigenetic episodes. The vein quartz appears to have formed earlier than vein ankerite did, and at least three distinct stages of ankerite formation with different Ca/Sr and Fe/Mn ratios were observed.The two types of mineral veins are sources of different suites of major and trace metals. Scanning electron microscope and sequential extraction studies show that, in addition to Fe, Mg, and Ca, vein ankerite is the dominant source of Mn, Cu, Ni, Pb, and Zn in the coal, and the contents of these five elements are as high as 0.09% and 74.0, 33.6, 185, and 289 μg/g, respectively. In contrast, vein quartz is the main carrier mineral for platinum-group elements (PGEs) Pd, Pt, and Ir in the coal, and the contents of Pd, Pt, and Ir are 1.57, 0.15, and 0.007 μg/g, respectively. Sequential extraction showed a high PGE content in the silicate fraction, up to 10.4 μg/g Pd, 1.23 μg/g Pt, and 0.05 μg/g Ir, respectively. It is concluded that the formation of ankerite and quartz and the anomalous enrichment of trace elements in the No. 11 Coal in the Dafang Coalfield, Guizhou, result from the influx of calcic and siliceous low-temperature hydrothermal fluids.  相似文献   

Fluid generation and evolution during exhumation of deeply subducted UHP continental crust: Petrogenesis of composite granite–quartz veins in the Sulu belt,China          下载免费PDF全文

S.‐J. Wang  L. Wang  M. Brown  P. M. Piccoli  T. E. Johnson  P. Feng  H. Deng  K. Kitajima  Y. Huang 《Journal of Metamorphic Geology》2017,35(6):601-629

Composite granite–quartz veins occur in retrogressed ultrahigh pressure (UHP) eclogite enclosed in gneiss at General's Hill in the central Sulu belt, eastern China. The granite in the veins has a high‐pressure (HP) mineral assemblage of dominantly quartz+phengite+allanite/epidote+garnet that yields pressures of 2.5–2.1 GPa (Si‐in‐phengite barometry) and temperatures of 850–780°C (Ti‐in‐zircon thermometry) at 2.5 GPa (~20°C lower at 2.1 GPa). Zircon overgrowths on inherited cores and new grains of zircon from both components of the composite veins crystallized at c. 221 Ma. This age overlaps the timing of HP retrograde recrystallization dated at 225–215 Ma from multiple localities in the Sulu belt, consistent with the HP conditions retrieved from the granite. The ε_Hf(t) values of new zircon from both components of the composite veins and the Sr–Nd isotope compositions of the granite consistently lie between values for gneiss and eclogite, whereas δ¹⁸O values of new zircon are similar in the veins and the crustal rocks. These data are consistent with zircon growth from a blended fluid generated internally within the gneiss and the eclogite, without any ingress of fluid from an external source. However, at the peak metamorphic pressure, which could have reached 7 GPa, the rocks were likely fluid absent. During initial exhumation under UHP conditions, exsolution of H₂O from nominally anhydrous minerals generated a grain boundary supercritical fluid in both gneiss and eclogite. As exhumation progressed, the volume of fluid increased allowing it to migrate by diffusing porous flow from grain boundaries into channels and drain from the dominant gneiss through the subordinate eclogite. This produced a blended fluid intermediate in its isotope composition between the two end‐members, as recorded by the composite veins. During exhumation from UHP (coesite) eclogite to HP (quartz) eclogite facies conditions, the supercritical fluid evolved by dissolution of the silicate mineral matrix, becoming increasingly solute‐rich, more ‘granitic’ and more viscous until it became trapped. As crystallization began by diffusive loss of H₂O to the host eclogite concomitant with ongoing exhumation of the crust, the trapped supercritical fluid intersected the solvus for the granite–H₂O system, allowing phase separation and formation of the composite granite–quartz veins. Subsequently, during the transition from HP eclogite to amphibolite facies conditions, minor phengite breakdown melting is recorded in both the granite and the gneiss by K‐feldspar+plagioclase+biotite aggregates located around phengite and by K‐feldspar veinlets along grain boundaries. Phase equilibria modelling of the granite indicates that this late‐stage melting records P–T conditions towards the end of the exhumation, with the subsolidus assemblage yielding 0.7–1.1 GPa at <670°C. Thus, the composite granite–quartz veins represent a rare example of a natural system recording how the fluid phase evolved during exhumation of continental crust. The successive availability of different fluid phases attending retrograde metamorphism from UHP eclogite to amphibolite facies conditions will affect the transport of trace elements through the continental crust and the role of these fluids as metasomatic agents interacting with the mantle wedge in the subduction channel.  相似文献