Variability in Early Amazonian Tharsis stress state based on wrinkle ridges and strike-slip faulting     

Chris H. Okubo  Richard A. Schultz   《Journal of Structural Geology》2006,28(12):2169

We present evidence for a decrease in the magnitude of Tharsis-circumferential compressive stress during the Late Hesperian to the Middle Amazonian based on chronologic changes in the predominant style of faulting in southern Amazonis Planitia. Using high-resolution MOLA topography, we identify a population of strike-slip faults that exhibit Middle Amazonian-aged displacements of regional chrono-stratigraphic units. These strike-slip faults are adjacent to an older population of previously documented Late Hesperian-aged thrust faults (wrinkle ridges). Along-strike orientations of these thrust and strike-slip faults reveal the Tharsis-radial stress to be the area's most compressive remote principal stress and that this stress orientation and magnitude persisted throughout the Late Hesperian to the Middle Amazonian. We show that the change in the predominant style of faulting from thrust faulting to strike-slip faulting during this time requires a decrease of the Tharsis-circumferential compressive stress to a magnitude less than lithostatic load, with negligible change in stress orientation.  相似文献   

Effect of some additives on synthesis of zeolite from coal fly ash   总被引：3，自引：0，他引：3  

Deyi Wu  Bohua Zhang  Li Yan  Hainan Kong  Xinze Wang 《International Journal of Mineral Processing》2006,80(2-4):266-272

Hydrothermal conversion of fly ash into zeolites was conducted and the effects of the addition of sodium halide and waste solutions produced after zeolitization of fly ash, as well as the adjustment of the Si/Al ratio prior to synthesis process on the formation and cation exchange capacity (CEC) of zeolite product were evaluated. Both the addition of NaCl and NaF ameliorated the crystallinity and CEC of synthesized zeolite, but NaF had a better improvement effect. Na⁺ was considered to enhance the crystallization of zeolite, while F⁻ favored the dissolution of fly ash. The type of zeolite formed depended on the Si/Al ratio of the starting material prior to the nucleation and crystallization of zeolite. The adjustment of the Si/Al ratio of fly ash by addition of Na₂SiO₄ and Al(OH)₃ changed the type and CEC of zeolite. Waste solutions contained large amount of Si and little Al due to the formation of a zeolite named NaP1 in zeolite terminology with the Joint Committee of Powder Diffraction Standard (JCPDS) code of 39-0219. The alkalinity decreased largely. As a result, the CEC value of zeolite products synthesized with waste solution as alkali source decreased. The supplementation of new alkali to adjust the alkalinity of waste solution could enhance the CEC of synthesized product. It was concluded that: (1) addition of sodium halide and adjustment of the Si/Al ratio prior to synthesis can improve the quality of zeolite; (2) waste solutions produced following the zeolitization of fly ash can be reused as an alkali source in the activation of fly ash; zero-emission of waste solution in the synthesis of zeolite from fly ash is possible.  相似文献   

A novel strategy using biodegradable EDDS for the chemically enhanced phytoextraction of soils contaminated with heavy metals   总被引：1，自引：0，他引：1  

Chunling LUO Zhenguo SHEN Alan J.M. Baker Xiangdong LI 《中国地球化学学报》2006,25(B08):115-115

For the sake of cost and potential environmental risk, it is necessary to minimize the amount of chelates used in chemically-enhanced phytoextraction. In the present study, a biodegradable chelating agent, EDDS was added in a hot solution at 90℃ to the soil in which garland chrysanthemum （Chrysanthemum coronarium L.） and beans （Phaseolus vulgaris L., white bean） were growing. The application of hot chelate solutions was much more efficient than the application of normal chelate solutions （25℃） in improving the uptake of heavy metals by plants. When 1 mmol kg1 of EDDS as a hot solution was applied to soil, the concentrations ofCu, Zn and Cd and the total phytoextraction by the shoots of the two plant species exceeded or approximated those in the shoots of plants treated with 5 mmol kg^-1 of normal EDTA solution. The concentrations of metals in the shoots of beans were significantly correlated with the relative electrolyte leakage rate of root cells, indicating that the root damage resulting from the hot solution might play an important role in the process of chelate-enhanced metal uptake. The soil leaching study demonstrated that decreasing the dosage of chelate resulted in decreased concentrations of soluble metals in soils. On the 28th day following the application of chelate, the concentrations of soluble metals in the EDDS treated soil were not significantly different from the concentrations in the control soil to which chelates had not been applied.  相似文献   

Seismic activity associated with the subducting motion of the Philippine Sea plate beneath the Kanto district, Japan   总被引：1，自引：1，他引：1  

Sadaki Hori 《Tectonophysics》2006,417(1-2):85

The Pacific plate and the Philippine Sea plate overlap and subduct underneath the Kanto region, central Japan, causing complex seismic activities in the upper mantle. In this research, we used a map selection tool with a graphic display to create a data set for earthquakes caused by the subducting motion of the Philippine Sea plate that are easily determined. As a result, we determined that there are at least four earthquake groups present in the upper mantle above the Pacific plate. Major seismic activity (Group 1) has been observed throughout the Kanto region and is considered to originate in the uppermost part of mantle in the subducted Philippine Sea plate, judging from the formation of the focal region and comparison with the 3D structure of seismic velocity. The focal mechanism of these earthquakes is characterized by the down-dip compression. A second earthquake layer characterized by down-dip extension (Group 2), below the earthquakes in this group, is also noted. The focal region for those earthquakes is considered to be located at the lower part of the slab mantle, and the Pacific plate located directly below is considered to influence the activity. Earthquakes located at the shallowest part (Group 3) form a few clusters distributed directly above the Group 1 focal region. Judging from the characteristics of later phases in these earthquakes and comparing against the 3D structure of seismic velocity, the focal regions for the earthquakes are considered to be located near the upper surface of the slab. Another earthquake group (Group 4) originates further below Group 2; it is difficult to consider these earthquakes within a single slab. The seismic activities representing the upper area of the Philippine Sea plate are Group 3. This paper proposes a slab geometry model that is substantially different from conventional models by strictly differentiating the groups.  相似文献   

冲击凿岩钎杆的瞬态动力学分析          下载免费PDF全文

周晔  张国榉 《探矿工程》2006,33(9):46-48

以ANSYS为平台，按照真实工作状态对凿岩钎杆进行了瞬态动力学分析，并对不同活塞形状下分析结果数据进行了比较，为冲击凿岩系统设计提供了理论依据。  相似文献   

CFG桩复合地基褥垫层的合理厚度确定方法研究          下载免费PDF全文

贾瑞杰  隆威  於法明 《探矿工程》2006,33(4):5-7

在CFG桩复合地基设计中，褥垫层的厚度设计是一个重点，它是复合地基承载力能否全部发挥的关键因素之一。但其设计上基本是靠经验取值，缺少理论根据。从理论方面入手，推导了褥垫层厚度的理论计算方法，给出了最佳垫层厚度、桩土应力比的解析表达式。  相似文献   

Effect of a submerged bay-mouth breakwater on tsunami behavior analyzed by 2D/3D hybrid model simulation     

Koji Fujima 《Natural Hazards》2006,39(2):179-193

The hybrid numerical model had been developed to simulate a complicated 3D flow around structures generated by tsunami. In the model, the conventional 2D model is adopted for the wide region far from structures and the 3D non-hydrostatic pressure model is used in the limited region adjacent to structures. The applicability of the model is shown by comparisons of the numerical results with the experimental results of the laboratory model tests and the numerical analysis results of the conventional whole 2D simulation. In addition, the effect of a submerged structure at the opening of a breakwater is discussed from the numerical simulations by the hybrid model. The submerged structure improves the stability of the rubble mound and reduces the tsunami inflow into the bay, while it increases the water surface velocity around the opening of the breakwater. The increase of surface velocity causes the increases of impulsive forces by collision with drafts and so on.  相似文献   

Surface temperature differences between minerals in crystalline rocks: Implications for granular disaggregation of granites through thermal fatigue   总被引：4，自引：0，他引：4  

Miguel Gmez-Heras  Bernard J. Smith  Rafael Fort 《Geomorphology》2006,78(3-4):236-249

Thermal expansion differences between minerals within rocks under insolation have previously been assumed to drive breakdown by means of granular disaggregation. However, there have been no definitive demonstrations of the efficacy of this weathering mechanism. Different surface temperatures between minerals should magnify thermal expansion differences, and thus subject adjacent minerals to repeated stresses that might cause breakdown through fatigue failure. This work confirms the existence of surface temperature differences between minerals in granitic rocks under simulated short-term temperature fluctuations so as to discriminate their potential for initiating granular disaggregation. The influence of colour, as a surrogate for albedo, and crystal size, as a function of thermal mass are specifically identified because of their ease of quantification. Four rock types with a range of these properties were examined, and subjected to repeated short-term temperature cycles by radiative heating and cooling under laboratory conditions. Results show that while albedo is the main control for overall and individual maximum temperatures, crystal size is the main factor controlling higher temperature differences between minerals. Thus, stones with large differences of mineral sizes can undergo magnified stresses due to thermal expansion differences.  相似文献   

A greenhouse study on root dynamics of cactus pears, Opuntia ficus-indica and O. robusta     

H.A. Snyman   《Journal of Arid Environments》2006,65(4):529-542

Over the last 10 years a great interest in spineless cactus pear was shown in the drier areas in terms of both fresh fruit and fodder production. However, there is a lack of knowledge on quantitative data on root dynamics of these plants needed to fully understand its potential under water limiting conditions. This study aimed at quantifying the effects of water stress on the growth of tap roots, side roots and rain roots of the species Opuntia ficus-indica (L.) Miller (cultivar Morado—green cladode) and O. robusta Wendl. (cultivar Monterey—blue cladode). One-year-old cladodes were planted in root boxes and pots (2002/2003 season) that were kept in the greenhouse at day/night temperatures of 25–30 °C/15–18 °C. Placing the cladodes flat on the soil, more areoles came in contact with the soil and therefore more roots developed in both species with an average of only 3.4% areole complexes not rooting. Each areole complex formed on average 3 roots. The highest daily tap root growth was 42 and 36 mm for O. ficus-indica and O. robusta, respectively. Tap root growth increased in the morning with water stress for both species but decreased in the afternoon. Side root growth increased with water stress, with that of O. robusta more per tap root than O. ficus-indica. O. robusta showed a finer root system than O. ficus-indica. The side roots grew as much as 8 and 5 mm per day for O. ficus-indica and O. robusta, respectively. Whitish rain roots developed on the established roots within the first hour after rewetting the soil and grew for only 3 days. Rain roots grew up to 7 and 5 mm within a day for O. ficus-indica and O. robusta, respectively. Considering all studied aspects of their roots systems, O. robusta appears to be better adapted to drought (less sensitive to water stress) than O. ficus-indica.  相似文献   

Estimating the minimum in-stream flow requirements via wetted perimeter method based on curvature and slope techniques     

LIU Suxia  MO Xingguo  XIA Jun  LIU Changming  LIN Zhonghui  MEN Baohui  JI Lina 《地理学报》2006,16(2):242-250

Under the assumptions of triangular cross section channel and uniform stable flow, an analytical solution of the minimum ecological in-stream flow requirement (MEIFR) is deduced. Based on the analytical solution, the uncertainty of the wetted perimeter method is analyzed by comparing the two techniques for the determination of the critical point on the relationship curve between wetted perimeter, P and discharge, Q. It is clearly shown that the results of MEIFR based on curvature technique (corresponding to the maximum curvature) and slope technique (slope being 1) are significantly different. On the P-Q curve, the slope of the critical point with the maximum curvature is 0.39 and the MEIFR varied prominently with the change of the slope threshold. This indicates that if a certain value of the slope threshold is not available for slope technique, curvature technique may be a better choice. By applying the analytical solution of MEIFR in the losing rivers of the Western Route South-to-North Water Transfer Project in China, the MEIFR value via curvature technique is 2.5%-23.7% of the multi-year average annual discharge, while that for slope technique is 11%-105.7%. General conclusions would rely on the more detailed research for all kinds of cross-sections.  相似文献