An Investigation of Digestion Methods for Trace Elements in Bauxite and Their Determination in Ten Bauxite Reference Materials Using Inductively Coupled Plasma‐Mass Spectrometry          下载免费PDF全文

Wen Zhang  Liang Qi  Zhaochu Hu  Cunjiang Zheng  Yongsheng Liu  Haihong Chen  Shan Gao  Shenghong Hu 《Geostandards and Geoanalytical Research》2016,40(2):195-216

Trace elements from samples of bauxite deposits can provide useful information relevant to the exploration of the ore‐forming process. Sample digestion is a fundamental and critical stage in the process of geochemical analysis, which enables the acquisition of accurate trace element data by ICP‐MS. However, the conventional bomb digestion method with HF/HNO₃ results in a significant loss of rare earth elements (REEs) due to the formation of insoluble AlF₃ precipitates during the digestion of bauxite samples. In this study, the digestion capability of the following methods was investigated: (a) ‘Mg‐addition’ bomb digestion, (b) NH₄HF₂ open vessel digestion and (c) NH₄F open vessel digestion. ‘Mg‐addition’ bomb digestion can effectively suppress the formation of AlF₃ and simultaneously ensure the complete decomposition of resistant minerals in bauxite samples. The addition of MgO to the bauxite samples resulted in (Mg + Ca)/Al ratios ≥ 1. However, adding a large amount of MgO leads to significant blank contamination for some transition elements (V, Cr, Ni and Zn). The NH₄HF₂ or NH₄F open vessel digestion methods can also completely digest resistant minerals in bauxite samples in a short period of time (5 hr). Unlike conventional bomb digestion with HF/HNO₃, the white precipitates and the semi‐transparent gels present in the NH₄HF₂ and NH₄F digestion methods could be efficiently dissolved by evaporation with HClO₄. Based on these three optimised digestion methods, thirty‐seven trace elements including REEs in ten bauxite reference materials (RMs) were determined by ICP‐MS. The data obtained showed excellent inter‐method reproducibility (agreement within 5% for REEs). The relative standard deviation (% RSD) for most elements was < 6%. The concentrations of trace elements in the ten bauxite RMs showed agreement with the limited certified (Li, V, Cr, Cu, Zn, Ga, Sr, Zr and Pb) and information values (Co, Ba, Ce and Hf) available. New trace element data for the ten RMs are provided, some of which for the first time.  相似文献   

Production and Certification of Synthetic Selenium Isotopic Reference Materials          下载免费PDF全文

Tongxiang Ren  Jun Wang  Hai Lu  Tao Zhou  Yuanjing Zhou 《Geostandards and Geoanalytical Research》2016,40(2):227-238

Due to intensive research into selenium isotopes in recent years, the increasing requirement for reliable and comparable measurement results has created a strong demand for selenium isotopic certified reference materials (iCRM) that were previously not available. To address this, eleven selenium iCRMs were developed, including ten synthetic iCRMs (GBW 04447–GBW 04456) and one natural iCRM (GBW 04457). The synthetic iCRMs were prepared with ⁷⁶Se, ⁷⁸Se, ⁸⁰Se and ⁸²Se solutions and a natural selenium solution; the natural iCRM was prepared with highly pure selenium material. The property values of isotope ratios in these iCRMs were certified by calibrated mass spectrometry with a collision cell multi‐collector ICP‐MS. The mass discrimination effect of the instrument was corrected with corresponding ⁷⁸Se/⁷⁶Se isotope mixtures and ⁸²Se/⁷⁶Se isotope mixtures, which were gravimetrically prepared with purified, isotopically enriched selenium materials. Homogeneity and stability tests were performed, and no significant influences were found. The uncertainty of the property values of the iCRMs was evaluated according to the Guide to the Expression of Uncertainty in Measurement (GUM) of ISO/BIPM and ISO Guide 35. The δ^82/76Se value of GBW 04457 relative to NIST SRM 3149 was also calculated. These iCRMs are intended for use in calibration of instruments and evaluation of methods for the determination of selenium isotope ratios.  相似文献   

冻融循环对不同孔隙率页岩相似材料影响的试验研究   总被引：2，自引：2，他引：0  

王永岩  柳雪庆  苏传奇  张余标  魏剑 《冰川冻土》2018,40(1):102-109

基于地质力学模型试验的相似理论,针对寒区岩体工程,分别制作了5种不同孔隙率的页岩相似材料,进行冻融循环试验,探究不同孔隙率的页岩相似材料在冻融前后,其主要物理力学参数的变化规律。试验研究表明：在冻融循环后,页岩相似材料的单轴抗压强度、三轴抗压强度、弹性模量、粘聚力、内摩擦角有不同程度的减小,孔隙率、泊松比有不同程度的增大。页岩相似材料的物理力学参数受冻融循环的影响随孔隙率的增大先增大后减小,孔隙率处于9.4%~13.6%时,受冻融循环影响最大;孔隙率处于5.8%~9.4%时,受冻融循环的影响随孔隙率的增大有增大的趋势;孔隙率处于13.9%~19.1%时,受冻融循环的影响随孔隙率的增大有减小的趋势。研究结果可以为西部寒区的岩土工程建设和减灾提供相关的科学依据。  相似文献   

四川盆地下古生界硅质页岩层系中硅质来源及其对有机质保存的影响初探     

谢小敏  刘伟新  张瀛  赵迪斐  唐友军  申宝剑  李志明 《地质论评》2021,67(1):67020014-67020014

四川盆地下古生界两套硅质页岩层系是其重要的页岩气产层,五峰组—龙马溪组硅质含量与TOC及含气量呈正相关性,暗示硅质矿物对该地区页岩气的生成具有重要意义。但硅质来源复杂,且存在后期硅质流体的注入。因此,本文在总结前人的研究成果基础上,对四川盆地寒武系底部硅质岩系与五峰组—龙马溪组硅质岩系的硅质特征进行了详细的岩石学分析,揭示了3种硅质来源特征：①同沉积无机硅质流体;②生物硅;③后期无机硅质流体。其中寒武系底部以同沉积无机硅质流体与生物硅来源为主,同沉积硅质流体导致有机质快速石化埋藏,有机质内部结构及形态保存较好;五峰组—龙马溪组硅质来源以后期无机硅质流体与生物硅来源为主,有机质在保存过程中受硅质流体的影响很小,有机质腐泥化作用充分,内部结构和形态多数保存较差。该研究初步揭示了两套页岩层系的硅质发育岩石学特征,及其对有机质保存的影响,期望能为四川盆地两套页岩气储层差异性提供新的思路与基础地质数据。  相似文献   

水基钻井液防塌封堵材料封堵特性实验研究          下载免费PDF全文

刘徐三 《探矿工程》2021,48(6):44-48

提高钻井液封堵能力是有效解决硬脆性页岩、煤层等复杂地层井壁失稳的主要技术手段。本文以在一定温度、压力条件下30 min的滤失量为评价标准,对几种封堵材料的封堵特性进行了实验研究。结果表明：除超细碳酸钙外,其他材料随着加量的增加,封堵效果越来越好;乳化沥青、乳化石蜡和油溶性酚醛树脂随着温度的升高,封堵效果变差,而聚乙二醇和聚酯先变差然后又有一定程度的恢复;聚酯和超细碳酸钙能够快速封堵微裂缝;几种封堵剂均对钻井液的流变性能有较明显的影响。对各封堵材料的封堵机理分析表明：不同的封堵材料具有不同的封堵特性,分别适应不同的温度、压力条件。只有根据井下实际情况,有针对性地选择与之相适应的封堵材料,才能有效提高水基钻井液的封堵能力。  相似文献   

深孔纳米复合水泥基护壁堵漏材料研究          下载免费PDF全文

王胜  吴丽钰  蒋贵  张统得  陈礼仪 《探矿工程》2021,48(12):7-13

本文围绕深部钻探技术中护壁堵漏材料性能的实际需要,研制了一种深孔纳米复合水泥基护壁堵漏新材料。首先,通过分析100 ℃条件下2种水泥材料的基本性能,确定了G级油井水泥为胶凝材料;然后,基于深孔钻探护壁堵漏材料的性能缺陷,采用特种纤维、纳米材料针对性改善水泥基浆液的力学性能,并优选早强剂（ZQ）、减水剂（GB）作为外加剂进行正交实验,进而研制出纳米复合水泥基护壁堵漏材料优化配方;最后,对其主要性能进行分析评价。结果表明该材料在深孔钻探中浆液流动性好,力学性能优异,综合性能满足深孔钻探护壁堵漏需求。  相似文献   

含部分晶须的钛酸锂的制备及其性能表征     

邓昭平  倪师军  李思平  夏新蕊  王鹏威 《矿物岩石》2006,26(4):98-100

L i4T i5O12是一种循环性能好、有很好的充放电平台、理论比容量较大、不与电解液反应的新型负极材料,研究探索以偏钛酸和碳酸锂为主要原料制备含部分晶须的尖晶石型晶型L i4T i5O12的一种方法。通过此工艺在1 000℃煅烧8 h后在样品中约20%的晶须出现,晶须的直径≤0.5μm,晶须的长度约为7μm。  相似文献   

四川甘洛铅锌矿集区闪锌矿Rb-Sr等时线年龄及其地质意义     

魏宇 《地质与勘探》2024,60(3):482-493

四川甘洛铅锌矿集区位于扬子地块西南缘的川滇黔铅锌成矿带北段,是四川主要的铅锌产地,具有重要经济价值。为研究该矿集区铅锌成矿时代、成矿大地构造背景和成矿机制,以支撑区域找矿勘查,在区内选择赤普和尔呷地吉两个典型铅锌矿床开展闪锌矿Rb-Sr同位素体系研究,获得Rb-Sr等时线年龄246 ± 17 Ma（MSWD= 2.3）,表明区内铅锌矿化作用发生于早三叠世,与古特提斯洋闭合时限吻合;闪锌矿(87Sr/86Sr)i值变化于0.71061~0.71393,高于幔源87Sr/86Sr值0.70355及峨眉山玄武岩87Sr /86Sr值0.704979~0.706938,低于基底岩石87Sr /86Sr值0.7243~0.7288,暗示成矿物质主要来源于地壳。综合前人研究,认为在古特提斯洋闭合背景下,强烈造山运动诱发盆地卤水深循环并萃取基底地层中的成矿物质,在峨眉山玄武岩岩浆活动的热动力条件下,含矿流体沿马拉哈断裂进一步迁移沉淀形成了赤普和尔呷地吉铅锌矿床。马拉哈深大断裂及造山作用派生的层间或断层破碎带、碳酸盐岩地层是甘洛地区主要的控矿要素。  相似文献   

石煤钒矿成分分析标准物质的研制     

田宗平  彭君  王干珍  易晓明  曹健  秦毅 《岩矿测试》2021,(1):111-120

石煤钒矿资源的开发和合理利用需要对其成分进行准确的分析测试和质量控制.目前,国内外尚未有石煤钒矿成分分析的标准物质,现有钒成分分析标准物质无论是其五氧化二钒含量,还是定值成分都无法满足我国对石煤钒矿勘查、开发和研究需要.本文对采自湖北省崇阳县小源冲钒矿、湖南省芷江县牛牯坪钒矿、湖南省古丈县岩头寨钒矿和湖南省凤凰县黑冲钒...  相似文献   

地磁台站建设中磁测异常现象分析   总被引：1，自引：1，他引：0  

吴乔木 《地震地磁观测与研究》2006,27(4):63-66

地磁台建设磁性跟踪测试工作很重要,通过对跟踪磁测中发现的一个异常现象的分析,计算了不同重量、距离的铁磁性物质对磁房建筑场地磁场的影响,讨论了排除施工现场磁性干扰的一些办法,并得出各种重量铁磁性物质与磁房建筑物的安全距离,还讨论了地磁台部分建筑材料的选择问题。  相似文献