砂-黏土双层地基极限承载力的数值研究     

郑刚  周海祚  程雪松  刘景锦  郑帅群 《岩土力学》2016,37(5):1475-1485

在实际工程中,常见天然的或通过人工换填形成的上部砂土、下部黏土的层状地基,目前关于这种双层地基极限承载力和破坏机制研究还不够深入。通过有限差分法建立双层地基数值模型,分析基底粗糙程度、砂土剪胀角和超载对地基破坏模式及极限承载力的影响,并根据有限差分法计算结果对强度加权平均法、应力扩散法和冲剪破坏法等现有实用计算方法的估算正确性进行评价。研究结果表明,基底粗糙程度对极限承载力的影响随着砂土内摩擦角的增大而减小;当剪胀角较小时,剪胀角变化对承载力的影响更为明显;当下层黏土强度较小时,超载的作用更明显。强度加权平均法由于低估破坏面影响深度导致砂土层权重较大,计算结果偏大;应力扩散法忽略了砂土剪切强度,在砂土层较厚时出现低估;冲剪破坏法由于可较为精确地计算砂土破坏面上抗剪强度和被动土压力,是3种实用方法中计算最准确的,当砂土厚度和黏土强度较大时,建议按太沙基经验公式对下卧黏土进行局部剪切破坏修正后确定极限承载力。  相似文献   

Geodynamic evolution of a forearc rift in the southernmost Mariana Arc     

Julia M. Ribeiro  Robert J. Stern  Fernando Martinez  Osamu Ishizuka  Susan G. Merle  Katherine Kelley  Elizabeth Y. Anthony  Minghua Ren  Yasuhiko Ohara  Mark Reagan  Guillaume Girard  Sherman Bloomer 《Island Arc》2013,22(4):453-476

The southernmost Mariana forearc stretched to accommodate opening of the Mariana Trough backarc basin in late Neogene time, erupting basalts at 3.7–2.7 Ma that are now exposed in the Southeast Mariana Forearc Rift (SEMFR). Today, SEMFR is a broad zone of extension that formed on hydrated, forearc lithosphere and overlies the shallow subducting slab (slab depth ≤ 30–50 km). It comprises NW–SE trending subparallel deeps, 3–16 km wide, that can be traced ≥ ∼30 km from the trench almost to the backarc spreading center, the Malaguana‐Gadao Ridge (MGR). While forearcs are usually underlain by serpentinized harzburgites too cold to melt, SEMFR crust is mostly composed of Pliocene, low‐K basaltic to basaltic andesite lavas that are compositionally similar to arc lavas and backarc basin (BAB) lavas, and thus defines a forearc region that recently witnessed abundant igneous activity in the form of seafloor spreading. SEMFR igneous rocks have low Na₈, Ti₈, and Fe₈, consistent with extensive melting, at ∼23 ± 6.6 km depth and 1239 ± 40°C, by adiabatic decompression of depleted asthenospheric mantle metasomatized by slab‐derived fluids. Stretching of pre‐existing forearc lithosphere allowed BAB‐like mantle to flow along the SEMFR and melt, forming new oceanic crust. Melts interacted with pre‐existing forearc lithosphere during ascent. The SEMFR is no longer magmatically active and post‐magmatic tectonic activity dominates the rift.  相似文献   

Subduction of a fossil slow–ultraslow spreading ocean: a petrology-constrained geodynamic model based on the Voltri Massif,Ligurian Alps,Northwest Italy     

《International Geology Review》2012,54(7):787-803

Slow–ultraslow spreading oceans are mostly floored by mantle peridotites and are typified by rifted continental margins, where subcontinental lithospheric mantle is preserved. Structural and petrologic investigations of the high-pressure (HP) Alpine Voltri Massif ophiolites, which were derived from the Late Jurassic Ligurian Tethys fossil slow–ultraslow spreading ocean, reveal the fate of the oceanic peridotites/serpentinites during subduction to depths involving eclogite-facies conditions, followed by exhumation.

The Ligurian Tethys was formed by continental extension within the Europe–Adria lithosphere and consisted of sea-floor exposed mantle peridotites with an uppermost layer of oceanic serpentinites and of subcontinental lithospheric mantle at the rifted continental margins. Plate convergence caused eastward subduction of the oceanic lithosphere of the Europe plate and the uppermost serpentinite layer of the subducting slab formed an antigorite serpentinite-subduction channel. Sectors of the rather unaltered mantle lithosphere of the Adria extended margin underwent ablative subduction and were detached, embedded, and buried to eclogite-facies conditions within the serpentinite-subduction channel. At such P–T conditions, antigorite serpentinites from the oceanic slab underwent partial HP dehydration (antigorite dewatering and growth of new olivine). Water fluxing from partial dehydration of host serpentinites caused partial HP hydration (growth of Ti-clinohumite and antigorite) of the subducted Adria margin peridotites. The serpentinite-subduction channel (future Beigua serpentinites), acting as a low-viscosity carrier for high-density subducted rocks, allowed rapid exhumation of the almost unaltered Adria peridotites (future Erro–Tobbio peridotites) and their emplacement into the Voltri Massif orogenic edifice. Over in the past 35 years, this unique geologic architecture has allowed us to investigate the pristine structural and compositional mantle features of the subcontinental Erro–Tobbio peridotites and to clarify the main steps of the pre-oceanic extensional, tectonic–magmatic history of the Europe–Adria asthenosphere–lithosphere system, which led to the formation of the Ligurian Tethys.

Our present knowledge of the Voltri Massif provides fundamental information for enhanced understanding, from a mantle perspective, of formation, subduction, and exhumation of oceanic and marginal lithosphere of slow–ultraslow spreading oceans.  相似文献   

Using horizontal and vertical building structure to constrain indirect sensor orientation     

Markus Gerke   《ISPRS Journal of Photogrammetry and Remote Sensing》2011,66(3):307-316

This paper presents a method to integrate linear horizontal, vertical and right-angled scene structures into the bundle adjustment of image sequences. An increasing number of airborne image acquisition systems is available and equipped with non-metric small- or medium-frame cameras and no or insufficiently accurate INS devices. In cases where the data is to be used for the production of geo-spatial data, where a certain accuracy and precision is required, an indirect sensor orientation, possibly including self-calibration, needs to be performed. The idea which led to the presented approach is to reduce the number of GCPs necessary for this task by applying the mentioned scene structures. The method directly uses the linear structures, visible at man-made objects as fictive observations within the adjustment, while self-calibration of intrinsic camera parameters and lens distortion is included as well.Experiments with two datasets demonstrate that, through this method, only limited GCP information is required to obtain satisfactory results. In fact, in one experiment using oblique images, several scene constraints were provided and only the datum was defined by ground control. The residuals at check points from this setup were similar to the traditional case where several well-distributed GCPs were available in the scene. In the second experiment the ability of this approach to support the bundle adjustment was shown for a UAV dataset. Although no GCP and camera calibration information was available, the visual inspection of adjusted object points and the residuals at horizontal structures confirmed the ability of the method to align an image block with the structure, as embodied in the defined scene constraints. Despite the convincing outcome of the experiments, it needs to be mentioned that some manual work is still involved in defining the constraints. In future work the issue of automation will be addressed.  相似文献   

高速铁路精密工程控制测量精度研究     

刘家臣 《测绘与空间地理信息》2011,(6):215-218

高速铁路轨道控制测量采用精密控制测量技术,采用斜轴墨卡托投影可以避免高斯投影投影带可控范围小,坐标转换和分带计算的问题,对于东西走向的线路能很好地控制投影长度变形。文章以长吉高铁控制测量数据,实现斜轴墨卡托投影,经过其投影精度的探讨,确定斜轴墨卡托投影能满足高铁精密控制测量的精度要求。  相似文献   

渐进式扩张海盆亚丁湾与南海西南次海盆扩张演化特征的对比   总被引：2，自引：1，他引：1       下载免费PDF全文

张洁  李家彪  李细兵  吴振利 《地球物理学报》2011,54(12):3079-3088

本文总结了渐进式扩张洋中脊和渐进式演化海盆的全球空间分布,并将西南次海盆与典型渐进式演化的亚丁湾加以比对,通过对海盆扩张中心的起源、扩张中心分段特征、火山活动、磁异常特征等的比较,为西南次海盆的演化提供新观点,为南海的演化观点寻找新证据.西南次海盆为渐进式扩张的海盆,与东部次海盆属于同一期扩张形成,海盆的渐进式扩张与渐进式扩张的方向很有可能受到地幔热柱(印支地幔柱、南海中部低速柱或海南地幔柱)的控制.南海的扩张演化模式并不是单一的,而是多种模式的综合,在考虑海底演化模式时应该同时考虑地幔柱的影响.  相似文献   

Transtensional folding     

《Journal of Structural Geology》2013

Strain modeling shows that folds can form in transtension, particularly in simple shear-dominated transtension. Folds that develop in transtension do not rotate toward the shear zone boundary, as they do in transpression; instead they rotate toward the divergence vector, a useful feature for determining past relative plate motions. Transtension folds can only accumulate a fixed amount of horizontal shortening and tightness that are prescribed by the angle of oblique divergence, regardless of finite strain. Hinge-parallel stretching of transtensional folds always exceeds hinge-perpendicular shortening, causing constrictional fabrics and hinge-parallel boudinage to develop.These theoretical results are applied to structures that developed during oblique continental rifting in the upper crust (seismic/brittle) and the ductile crust. Examples include (1) oblique opening of the Gulf of California, where folds and normal faults developed simultaneously in syn-divergence basins; (2) incipient continental break-up in the Eastern California-Walker Lane shear zone, where earthquake focal mechanisms reflect bulk constrictional strain; and (3) exhumation of the ultrahigh-pressure terrain in SW Norway in which transtensional folds and large magnitude stretching developed in the footwall of detachment shear zones, consistent with constrictional strain. More generally, folds may be misinterpreted as indicating convergence when they can form readily in oblique divergence.  相似文献   

The origin of the Naturaliste Plateau,SE Indian Ocean: Implications from dredged basalts     

P.J. Coleman  P.J. Michael  J.C. Mutter 《Australian Journal of Earth Sciences》2013,60(3-4):457-468

Although a 1972 dredging by USNS Eltanin from the submarine Naturaliste Plateau was reported to yield rocks of continental origin, a re‐examination of the dredge haul shows that the rock clasts are in fact altered tholeiitic basalts. They have affinities both with MOR basalts and, especially, within‐plate basalts. Petrographically they correlate most closely with the Bunbury Tholeiitic Suite on the Australian mainland to the east. The basalts are reworked cobbles in a manganiferous Quaternary slump mass, which contains a quartz‐rich, felsic, detrital mineral suite with a granite‐gneiss provenance. The basalt cobbles were part of a basal conglomerate, which covered large areas of the Plateau. It is suggested that this was laid down from nearby elevated volcanic structures formed during the inception of seafloor spreading and the separation of Greater India from Australia at about 122 Ma BP.  相似文献   

Evaluation of pile foundation response to lateral spreading   总被引：7，自引：0，他引：7  

Tarek Abdoun  Ricardo Dobry 《Soil Dynamics and Earthquake Engineering》2002,22(9-12):1051-1058

The effects of liquefaction on deep foundations are very damaging and costly, and they keep recurring in many earthquakes. The first part of the paper reviews the field experience of deep foundations affected by liquefaction during earthquakes in the last few decades, as well as the main lessons learned. The second part of the paper presents results of physical modeling of deep foundations in the presence of liquefaction conducted by the authors and others at the 100g-ton RPI centrifuge. In the last decade centrifuge modeling has been identified as a key tool to identify and quantify mechanisms, calibrate analyses and evaluate retrofitting strategies for pile foundations. Results are presented of centrifuge models of instrumented pile foundations subjected to lateral spreading, including single pile and pile groups, 2- and 3-layer soil profiles, mass and stiffening elements above ground to incorporate the effect of the superstructure, and evaluation of proposed retrofitting strategies. Interpretations of these centrifuge experiments and their relation to field observations and soil properties.  相似文献   

Centrifuge modeling of seismic behavior of a slope in liquefiable soil     

V. M. Taboada-Urtuzuastegui  G. Martinez-Ramirez  T. Abdoun 《Soil Dynamics and Earthquake Engineering》2002,22(9-12):1043-1049

Two centrifuge tests were designed to improve the understanding the response of liquefied sandy slopes beyond initial liquefaction. A distinctive dilative behavior of the soil was observed near the slope where static shear stresses are present. The corresponding drops in the piezometric records and simultaneous negative upslope spikes in the acceleration records were measured in the transducer raw data. This dilative response became stronger as the input acceleration increased and tends to limit the downslope accumulation and thus reducing the permanent lateral displacements. Therefore, the maximum permanent displacement was smaller in the model with the larger input motion, because it developed a stronger dilative response. The dilative response was not observed away from the slope, where no static shear stresses are present.  相似文献