Analysis of Post-Failure Slope Movements within the Framework of Hazard and Risk Analysis     

Vaunat  Jean  Leroueil  Serge 《Natural Hazards》2002,26(1):81-107

The paper first recalls briefly a methodological framework to assess landslide hazard and risk analysis in terms of predisposition, triggering andrevealing factors. This framework, that reflects the mechanisms involved in the landslide, is based on the Geotechnical Characterisation of slope movements proposed by Vaunat et al. (1994) and Leroueil et al. (1996). The Geotechnical Characterisation can be schematized by a 3-D matrix having the following axes: types of movement; types ofmaterial; and the four stages of movement: pre-failure, failure, post-failure andreactivation. For each relevant element of this 3-D matrix, there is a characterisationsheet including: the controlling laws and parameters, the predisposition factors, thetriggering or aggravating factors, the revealing factors and the consequences of the movement. The paper focuses afterwards on the post-failure stage, which generallyis the most destructive, and on the mobility index. It is shown that this laterindex can be described as the product of sub-indices associated with failure, brittlenessof the material, ability of the soil to develop pore pressures, geometry of the moving soil mass and characteristics of the terrain. It is also shown how these aspectscan be incorporated into the Geotechnical characterisation of slope movements. This seems to provide a rational basis for examining slope movements at the post-failure stage and assessing associated risks.  相似文献   

A multi-scale study on land use and land cover quality change: The case of the Yellow River Delta in China   总被引：5，自引：0，他引：5  

Xuegong Xu  Honghai Guo  Xiaoling Chen  Huiping Lin  Qiaoling Du 《GeoJournal》2002,56(3):177-183

This paper presents a case study of the Yellow River Delta in China, to trace land use and land cover changes during the past 20 years, with an emphasis on land quality changes. Three sets of data are used in this case study: remote sensing data derived from satellite images; crop yield data from statistics; and soil data collected by the researchers in the field. Our study reveals that at the regional scale, LUCC has taken place in a positive direction: vegetation cover has been expanding and crop yields per hectare have been on rise. However, while the overall eco-environment has improved, the improvement is uneven across the Delta region. At local levels, some areas show signs of increased salinization and declining organic content. Both natural forces and human activities are responsible for the LUCC, but human activities play a more important role. While some impacts of human activities are positive, the damages are often long-lasting and irreversible. We also conclude that it is necessary to use both macro data (such as remote sensing data) and micro data (data collected in the field) to study land quality change. The former are efficient in examining land quality changes at the regional scale, the latter can serve to verify ground patterns revealed from macro data and help to identify local variations, so as to get a comprehensive understanding of LUCC and promote sustainable land use and land management. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

县市级政府决策信息系统的开发应用:专业GIS 软件SK set V4 .0功能介绍———以贵州沿河土家族自治县资源遥感信息系统为例   总被引：1，自引：0，他引：1  

周立新  莫源富  张家仁  杨炜 《中国岩溶》2002,21(2):145-151

SK setV4.0是中国地质科学院岩溶地质研究所GIS中心2001年4月开发成功的、具有自主板权的专业GIS平台软件。它集成了现今较为先进的组件、控件重用，面向对象编程等技术，并以美国Inprise公司的BorladnC^ Builder编译软件为开发平台，提供了全中文菜单环境，不仅具有基本信息和多图层查询、相关分析动态监测、多因子分析、图斑编辑、自动演示、系统维护等功能，而且还具有快速响应的工具条、友好的对话框和较强的纠错机制，很适合缺乏专业GIS人才的县市级政府管理部门使用。文中还以贵州省沿河县资源遥感信息系统为例，对SK setV4.0的功能和使用方法进行了具体的介绍。  相似文献   

Anatomy of shelf deltas at the edge of a prograding Eocene shelf margin, Spitsbergen   总被引：1，自引：0，他引：1  

Donatella Mellere  Piret Plink-Björklund†  Ronald Steel† 《Sedimentology》2002,49(6):1181-1206

Abstract Although shelf‐edge deltas are well‐imaged seismic features of Holocene and Pleistocene shelf margins, documented outcrop analogues of these important sand‐prone reservoirs are rare. The facies and stratigraphic architecture of an outcropping shelf‐edge delta system in the Eocene Battfjellet Formation, Spitsbergen, is presented here, as well as the implications of this delta system for the generation of sand‐prone, shelf‐margin clinoforms. The shelf‐edge deltas of the Battfjellet Formation on Litledalsfjellet and Høgsnyta produced a 3–5 × 15 km, shelf edge‐attached, slope apron (70 m of sandstones proximally, tapering to zero on the lower slope). The slope apron consists of distributary channel and mouth‐bar deposits in its shelf‐edge reaches, passing downslope to slope channels/chutes that fed turbiditic lobes and spillover sheets. In the transgressive phase of the slope apron, estuaries developed at the shelf edge, and these also produced minor lobes on the slope. The short‐headed mountainous rivers that drained the adjacent orogenic belt and fed the narrow shelf, and the shelf‐edge position of the discharging deltas, made an appropriate setting for the generation of hyperpycnal turbidity currents on the slope of the shelf margin. The abundance of organic matter and of coal fragments in the slope turbidites is consistent with this notion. Evidence that many of the slope turbidites were generated by sustained turbidity currents that waxed then waned includes the presence of scour surfaces and thick intervals of plane‐parallel laminae within turbidite beds in the slope channels, and thick spillover lobes with repetitive alternations of massive and flat‐laminated intervals. The examined shelf‐edge to slope system, now preserved mainly below the shelf break and dominated by sediment gravity‐flow deposits, has a threefold stratigraphic architecture: a lower, progradational part, in which the clinoforms have a slight downward‐directed trajectory; a thin aggradational zone; and an upper part in which clinoforms backstep up onto the shelf edge. A greatly increased density of erosional channels and chutes marks the regressive‐to‐transgressive turnaround within the slope apron, and this zone becomes an angular unconformity up near the shelf edge. This unconformity, with both subaerial and subaqueous components, is interpreted as a sequence boundary and developed by vigorous sand delivery and bypass across the shelf edge during the time interval of falling relative sea level. The studied shelf‐margin clinoforms accreted mostly during falling stage (sea level below the shelf edge), but the outer shelf later became estuarine as sea level became re‐established above the shelf edge.  相似文献   

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site     

Hartmut Kern  Zhenmin Jin  Shan Gao  Till Popp  Zhiqin Xu 《Tectonophysics》2002,354(3-4)

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.  相似文献   

Analyzing CO2 emissions mitigation by technology improvement in Central and Eastern Europe     

Diana Ürge-Vorsatz  Adam Szeszler 《GeoJournal》2002,57(3):211-226

As a legacy of the centrally planned economy, the economies in transition of Central and Eastern Europe (CEE) have a unique potential to reduce their greenhouse gas emissions through the improvement in their high energy intensities. Since much of this `low-hanging fruit' in energy-efficiency improvements can be highly cost-effective, many developed countries facing difficulties in meeting their greenhouse gas (GHG) emission targets domestically are eager to find such opportunities in the CEE region. Therefore, studies analysing the potentials and costs of carbon dioxide reduction through technology improvement in the region have come into the limelight. While there are a few excellent studies in the region aimed at analysing climate change abatement potentials, they all embark on different assumptions, methodologies and boundary conditions. It is hence difficult, if not impossible, to compare and analyse the results of these studies across different authors, countries or time horizons. Consequently, the purpose of this paper is to place four leading studies on GHG mitigation through technology improvement from the CEE region into an internationally comparable framework. Four studies were selected from three countries, Poland, Hungary and Estonia, which are all the results of major national and international efforts to assess costs and potentials of GHG reduction. The paper places their assumptions, methods and final results into a framework which enables policy-makers and project designers to compare these across geographical and technological boundaries. Since other studies from around the globe have been analysed in this framework in the literature, this paper provides a vehicle for the findings of these four studies to be compared to others worldwide. In addition, the paper highlights a few areas where similar studies to be completed in the future in the region may be enhanced by incorporating features used in GHG mitigation research in other parts of the world. This revised version was published online in July 2006 with corrections to the Cover Date.  相似文献   

内蒙古北山重点成矿远景区主要地质特征与矿产资源潜力评价方向   总被引：1，自引：0，他引：1  

赵月明 《内蒙古地质》2002,(1)

本文根据北山地区区域地质背景、成矿地质条件及矿产分布特征,对北山地区初步划分出几个重点成矿远景区,建议作为今后进行区域固体矿产资源潜力评价的方向。  相似文献   

在"数字国土工程"中我区地学数据库建设的现状及发展趋势     

张梅  胡凤翔 《内蒙古地质》2002,(2)

近年来,在国土资源部的高度重视下,我区相继建立了一系列地学数据库。这些地学数据库的建立不仅为地矿行业提供了基础性数据,也加速了"数字国土工程"和国土资源信息化建设的步伐。随着信息技术的高速发展,利用地理信息系统(GIS)将各类地学数据有机地结合起来,形成地学数据应用与管理系统,最终通过网络服务于社会,必将是各类地学数据发展的必然趋势。  相似文献   

造山带岩石圈化学结构平面图的编制——以秦岭—大别造山带为例          下载免费PDF全文

侯广顺  韩吟文  路凤香 《甘肃地质》2002,(2):87-92

国内外岩石圈化学组成的编图研究还处于探索阶段。笔者从岩石圈化学结构的思路出发 ,提出了编图的 3个地球化学指标 (铅同位素组成、T2DM 和同位素年代学 )和表示方法。以秦岭—大别造山带为例 ,同位素组成图可以反映构造分区和地壳生长历史 ,对造山过程和深部壳幔相互作用也有明确的显示 ;结合地质年代学的资料 ,化学结构平面图具有反映时空演化四维信息的能力。  相似文献   

Cathodoluminescence of authigenic albite     

Detlev K. Richter  Thomas G  tte  Dirk Habermann 《Sedimentary Geology》2002,150(3-4):367-374

Authigenic albites in carbonate rocks typically grow in a high-grade diagenetic to low-grade metamorphic environment and often show Roc-Tourné-twinning sensu Füchtbauer. Based on an investigation of four Middle to South European occurrences, they show Mn²⁺- and Fe³⁺-activated cathodoluminescence (CL), as revealed by combined high resolution spectroscopy of cathodoluminescence emission (HRS-CL), electron paramagnetic resonance (EPR), and proton-induced X-ray emission (μPIXE).  相似文献