鄂尔多斯盆地吴旗地区长6储层孔隙结构特征   总被引：7，自引：0，他引：7  

肖玲  田景春  魏钦廉  张春生 《新疆地质》2007,25(1):101-104

孔隙结构研究是油藏精细描述、储层综合评价的重要内容,采用铸体薄片、扫描电镜、铸体图像分析、高压压汞和恒速压汞等多种技术手段,对鄂尔多斯盆地吴旗地区长6储层的孔隙结构进行了深入分析和研究.鄂尔多斯盆地吴旗地区长6储层具有高孔低渗的特征,储层以原生剩余粒间孔为主,长石、岩屑及早期碳酸盐胶结物的溶解是形成次生孔隙的主要原因.中孔和小孔是油气的主要储集空间,细喉和中喉则是长6的基本渗流通道.铸体薄片、孔喉图像分析表明,吴旗长6储层具有复杂的孔喉分布特征,不同微相孔喉分布及孔隙结构特征是造成油井产能差异的重要因素.  相似文献   

Three-dimensional mapping of salt stores in the Murray-Darling Basin,Australia: 2. Calculating landscape salt loads from airborne electromagnetic and laboratory data     

《International Journal of Applied Earth Observation and Geoinformation》2007,9(2):103-115

Salt is widespread in the Australian landscape – in soil, regolith and groundwater – leading to concerns that land management practices may be putting much agricultural land and important water resources at risk of salinisation. Defining the location and nature of salt stores is an important first step in understanding the processes leading to salinity of soils, streams and groundwater resources, and predicting areas that may be at risk. Airborne geophysics can define subsurface salt stores and mobilisation pathways. Airborne electromagnetics (AEM) can map the three-dimensional conductivity structure of the landscape but does not, intrinsically, quantify the amount of salt. Salinity, moisture content, porosity and mineralogy all contribute to the electromagnetic signal, and each can vary significantly throughout the landscape.In the Lower Balonne catchment, Queensland, the relationship between AEM and the amount of salt in the landscape was quantified using laboratory analyses of pore fluids from core samples. A general statistical relationship was established between AEM conductivity and salt load (defined as the product of pore fluid salinity, porosity and moisture content)—with a significant positive correlation although data were generally widely dispersed. Comparison of calculated salt load with borehole electromagnetic logs gives insight into the factors contributing to dispersion in the AEM data.The relationship transforms bulk conductivity to salt load in 5 m layers, allowing the generation of a three-dimensional map of the salt load. This is a powerful tool for identifying areas that may require monitoring and management interventions to reduce salinity risk. An example is given of salt loads beneath an established irrigation area in the Lower Balonne catchment, Queensland.  相似文献   

Kinetic shear resistance,fluid pressures and radiation efficiency during seismic faulting   总被引：1，自引：0，他引：1  

Richard H. Sibson 《Pure and Applied Geophysics》1977,115(1-2):387-400

Summary During earthquake faulting, radiation efficiency and the degree stress relief are critically dependent on the kinetic shear resistance. This is often assumed to stay constant during slip, but geological evidence suggests that for moderate or large shallow earthquakes it may decrease dramatically to near-zero values once slip is initiated, either by melt formation or by transient increases in fluid pressure on the fault plane. The latter, probably more common process may arise partly through an interaction between temperature and water pressure, and partly through dilatancy recovery as shear stress is relieved. If the fault remains undrained, stress relief should be absolute with seismic efficiency reaching high values, so that stress drops give a measure of the level of tectonic shear stress in fault zones. Supporting evidence comes from the observation that apparent stress is generally about half the stress drop.  相似文献   

Pore characterization of organic-rich Lower Cambrian shales in Qiannan Depression of Guizhou Province,Southwestern China     

《Marine and Petroleum Geology》2015

Nine organic-rich shale samples of Lower Cambrian black shales were collected from a recently drilled well in the Qiannan Depression, Guizhou Province where they are widely distributed with shallower burial depth than in Sichuan Basin, and their geochemistry and pore characterization were investigated. The results show that the Lower Cambrian shales in Qiannan Depression are organic rich with TOC content ranging from 2.81% to 12.9%, thermally overmature with equivalent vitrinite reflectance values in the range of 2.92–3.25%, and clay contents are high and range from 32.4% to 53.2%. The samples have a total helium porosity ranging from 2.46% to 4.13% and total surface area in the range of 9.08–37.19 m²/g. The estimated porosity in organic matters (defined as the ratio of organic pores to the volume of total organic matters) based on the plot of TOC vs helium porosity is about 10% for the Lower Cambrian shales in Qiannan Depression and is far lower than that of the Lower Silurian shales (36%) in and around Sichan Basin. This indicates that either the organic pores in the Lower Cambrian shale samples have been more severely compacted than or they did not develop organic pores as abundantly as the Lower Silurian shales. Our studies also reveal that the micropore volumes determined by Dubinin–Radushkevich (DR) equation is usually overestimated and this overestimation is closely related to the non-micropore surface area of shales (i.e. the surface area of meso- and macro-pores). However, the modified BET equation can remove this overestimation and be conveniently used to evaluate the micropore volumes/surface area and the non-micropore surface areas of micropore-rich shales.  相似文献   

BIB-SEM characterization of pore space morphology and distribution in postmature to overmature samples from the Haynesville and Bossier Shales     

《Marine and Petroleum Geology》2015

Four Haynesville Shale and four Bossier Shale samples were investigated using a combination of Scanning Electron Microscopy (SEM) and Broad Ion Beam (BIB) polishing. This approach enables the microstructure and porosity to be studied down to the mesopore size (<50 nm) in representative areas at the scale of the BIB cross-sections. The samples vary in mineralogy, grain size and TOC and the maturity ranges from 2.42 to 2.58 VR_r in the Haynesville Shale to 1.79–2.26 VR_r in the Bossier Shale. This variety within the samples enabled us to study controls on the porosity distribution in these shales. Visible pores exist as intraparticle pores mainly in carbonate grains and pyrite framboids and as interparticle pores, mainly in the clay-rich matrix. Pores in organic matter show a characteristic porosity with respect to the type of organic matter, which mainly consists of mixtures of amorphous organic matter and minerals, organic laminae and discrete macerals. A clear positive trend of organic-matter porosity with maturity was found. Pore sizes are power law distributed in the range of 4.4 μm to at least 36 nm in equivalent diameter. The differences in power law exponents suggest that a more grain supported, coarse-grained matrix may prevent pores from mechanical compaction. Porosities measured in the BIB cross-sections were significantly lower in comparison to porosities obtained by Mercury Intrusion Porosimetry (MIP). This difference is mainly attributed to the different resolution achieved with BIB-SEM and MIP and type of pore network. Extrapolation of pore size distributions (PSDs) enables the BIB-SEM porosity to be estimated down to the resolution of the MIP and thus to upscale microstructural observation at the confined space of the BIB-SEM method to bulk porosity measurement. These inferred porosities are in good agreement with the MIP determined porosities, which underpins the assumption that pores segmented in BIB-SEM mosaics are representative of the MIP methodology.  相似文献   

真空预压法加固吹填土的孔隙水压力试验研究   总被引：2，自引：0，他引：2  

陈允进  宋晶  夏玉斌  王清  彭湘林  桑伟峰 《工程地质学报》2010,18(5):703-708

利用真空预压法处理吹填土时,孔隙水压力变化常常反映土体固结程度的好坏。通过6个模型箱试验,监测不同排水系统下孔隙水压力变化,确定有效排水体间距。研究发现0.4m间距的土内孔压下降效果比0.8m间距的土内孔压下降效果好;排水体内的孔隙水压力与排水体类型有关,且距离排水体10 cm处土体内的孔隙水压力仅为排水体内孔隙水压力的1/2弱;滤膜排水系统中的吹填土孔隙水压力下降幅度最快,B型排水板系统次之,而砂井系统最慢。另外,对于吹填土而言,排水体有效间距介于0.4m与0.8m之间,其中滤膜的有效间距最大,B型排水板次之,砂井远小于前两者。  相似文献   

The role of diagenesis and depositional facies on pore system evolution in a Triassic outcrop analogue (SE Spain)     

《Marine and Petroleum Geology》2014

This study aims at unravelling the diagenetic history and its effect on the pore system evolution of the Triassic redbeds exposed in SE Spain (TIBEM¹), an outcrop analogue of the TAGI (Trias Argilo-Gréseux Inférieur) reservoir (Berkine-Ghadames Basin, Algeria). Similar climatic, base level and tectonic conditions of aforementioned alluvial formations developed analogue fluvial facies stacking patterns. Furthermore, interplay of similar detrital composition and depositional facies in both formations resulted in analogue early diagenetic features. Petrographic observations indicate lithic subarkosic (floodplain facies) and subarkosic (braidplain facies) compositions which are considered suitable frameworks for potential reservoir rocks. Primary porosity is mainly reduced during early diagenesis through moderate mechanical compaction and formation of K-feldspar overgrowth, gypsum, dolomite and phyllosilicate cements. Early mesodiagenesis is testified by low chemical compaction and quartz cementation. Telodiagenetic calcite filling fractures and K-feldspar dissolution determined the final configuration of analysed sandstones. Mercury injection-capillary pressure technique reveals overbank deposits in the floodplain as the least suitable potential reservoirs because of their lowest open porosity (OP < 16%), permeability (k < 5 mD) and small dimensions. On the other hand, braidplain deposits show the highest values of such properties (OP up to 31.6% and k > 95 mD) and greater thickness and lateral continuity, so being considered the best potential reservoir. The accurate estimation of TIBEM microscale attributes can provide important input for appraisal and enhanced oil recovery performance in TAGI and in others reservoirs consisting on similar fluvial sandy facies.  相似文献   

Experimental evaluation of reservoir quality in Mesozoic formations of the Perth Basin (Western Australia) by using a laboratory low field Nuclear Magnetic Resonance     

《Marine and Petroleum Geology》2014

Accurate porosity and permeability evaluation of rock formations is critical to estimate the quality and resource potential of a reservoir. In addition to directly measure the porosity and pore size distribution, low field Nuclear Magnetic Resonance (NMR) is able to measure the effective porosity and estimate the in-situ formation permeability, though its robustness is arguable and requires calibrations on cores with specific lithologies.The Mesozoic formations of the central Perth Basin (Western Australia) host hot sedimentary aquifers and recently became key targets for geothermal heat extraction. A collection of cores was retrieved from three wells intersecting these units. The characterisation of their flow properties complements the current evaluation of the Perth Basin by adding new data on effective porosity, pore size distribution, pore geometry and calibration of predictive models for the permeability according to a comprehensive facies classification scheme.This study highlights the consistency of the NMR approach when compared to conventional helium injection method. Most favourable lithologies for well production correspond to very coarse to fine sandstones of fluvial channel fill with porosities >15% and permeabilities >>1 mD. Similarly, these facies exhibit (i) the highest effective porosities, (ii) the highest pore space to pore throat ratio, and (iii) the lowest contribution of clay bound water. These aspects confirm the importance of clay occurrence in the assessment of the flow efficiency of a formation.The Yarragadee Formation presents the best reservoir quality regarding its porosity and permeability, even though high discrepancies occur locally owing to the great variability of lithofacies encountered. The scattered values observed for the Lesueur Sandstone are likely to be due to the basin architecture and fault system which generate different mechanical compaction and secondary cementation. Given an adequate facies analysis, the NMR method represents a powerful tool to estimate the flow efficiency of a reservoir.  相似文献   

扬州市江都区地热资源前景分析     

胡秀艳 《江苏地质》2014,38(2):339-342

江都区位于宁通隆起与苏北坳陷接合部,具有良好的地热地质开发利用前景。地热资源主要为传导型,分为孔隙型和岩溶裂隙型2个地热系统。根据地热地质条件分为北部、中部及南部3个地热资源分区。北部以孔隙型为主,中部、南部以构造裂隙型为主。预测可采地热水资源总量约11.18万m3/d,地热水温度40～68℃。  相似文献   

Pore orientation of granular materials during biaxial compression     

《Computers and Geotechnics》2014

The local pore spaces in granular materials tend to be aligned parallel to the major principal stress direction upon particle mobilization. Manifestation of this response has been numerically validated in our previous studies with the aid of discrete element method modeling and image processing techniques during creep and shearing. We now extend the modeling of pore geometry, constructed with spherical particles, to assemblies of particle clumps. Two-dimensional simulations are performed for both loose and dense assemblies of spherical particles and particle clumps. Each particle packing is bound by rigid or flexible walls and subjected to biaxial compression and the particle mobilization effect on the evolution of pore orientation is explored. Randomly shaped pores surrounded by adjacent particles are geometrically quantified by Delaunay tessellation and fitted with ellipses. Results show that localization is apparent in dense assemblies, in particular for clumped particle packing, while loose assemblies exhibit diffusive failure. Small pores within well-defined shear bands tend to align either parallel to the direction of the shear band or perpendicular to the major principal stress. On the other hand, small pores within the blocks and large pores have a tendency to become elongate towards the major principal stress direction. This study reveals for the first time that pore orientation is dependent upon particle shape, pore size, and assembly conditions on the pore and global scales.  相似文献