Optimum design of filament-wound multilayer-sandwich submersible pressure hulls     

Cho-Chung Liang  Hung-Wen Chen  Chan-Yung Jen 《Ocean Engineering》2003,30(15):1941-1967

Submersible pressure hulls with fiber-reinforced multilayer-sandwich constructions have been developed in recent years as substitutes for classical metallic ring-stiffened pressure hulls. This study aims to optimize the design of filament-wound multilayer-sandwich submersible pressure hulls, taking into consideration the shell buckling strength constraint, the angle-ply laminated facing failure strength constraint and the low-density isotropic core yielding strength constraint under hydrostatic pressure using the hybrid genetic algorithm (HGA). The thickness of the facing, the thickness of the core layer, the orientation angle of the fibers in the facings and the shear modulus of the core material are taken as design variables. A sensitivity analysis is performed to study the effects of the operational depths and the hull shell geometry parameter, the length-to-diameter ratio (L/D), on the optimal design of filament-wound multilayer-sandwich submersible pressure hulls with graphite/epoxy, glass/epoxy and boron/epoxy composite facings. The results reveal that the optimal weight of various sandwich pressure hulls increases linearly with the operational depth, but it is almost unchanged as the geometry paramter. Furthermore, Graphite/Epoxy is the best choice for the material of the facings in a light-weight design. With reference to wall design, Boron/Epoxy is the best choice for the material of the facing at shallow depths, but Graphite/Epoxy is the best choice at extreme depths. Results of this study provide a valuable reference for designers of underwater vehicles.  相似文献   

西太平洋暖池区气象学特征分析   总被引：1，自引：0，他引：1  

吴增茂  张庆荣 《海洋湖沼通报》1994,(2):113-119

本文根据ＴＯＧＡ－ＣＯＡＲＥ强化观测资料及卫星资料分析讨论了西太平洋暖池区１１－２月间海面气象要素的平均特征。分析发现海面气压平均日变化似乎同中纬度区明显不同。文中还分析讨论了在西太暖池区西风爆发、赤道浅涡、信风逆温及ＩＴＣＥ和南太平洋辐合带ＳＰＣＺ的变化特征。  相似文献   

Hydrodynamic forces on partly buried tandem, twin pipelines in current     

Sevket Cokgor  Ilhan Avci 《Ocean Engineering》2001,28(10):476

This study extends the investigations of the forces on a cylinder, laid on, or partly buried in the bed with a parallel twin dummy cylinder nearby and without it, and were determined by measuring the pressure distribution on the cylinder in the case of a steady current. The pressure distribution around the cylinder was measured by using pressure transducers. The forces on the cylinder were calculated by the integration of the measured pressures on the surface of the cylinder. Force coefficients were obtained for the ranges of Re=0.8×10⁴–1.5×10⁴ for the burial depth to diameter RATIO=0:0.7. The distance between axis of the measurement and dummy cylinders to diameter ratio (x/D) was 2, 1.5 and 1. The dummy cylinder was replaced downstream and upstream of the measurement cylinder.  相似文献   

论氢化物的形成及其在分析测试领域的应用          下载免费PDF全文

郑大中  王惠萍  郑若锋 《江苏地质》2008,32(1):5-11

论述了氢化物形成的普遍性、氢化物的物理化学性质、元素周期系各类元素的氢化物类型。认为一些金属离子、非金属离子在酸性介质中与硼氢化钾（钠）作用及金属锌等强还原剂作用生成氢化物。综述了氢化物的形成在分析测试领域的应用：试样分解、分离富集、容量分析、光度分析、原子光谱分析、质谱分析。  相似文献   

MS SQL Server渗透测试方法     

谢朝海  王建法  董平 《国土资源信息化》2008,(5):35-38

当前电子政务、电子商务和企业内部的很多数据和敏感信息都存放在MS SQL Server数据库中,但是SQL Server数据库的安全性却一直没有像操作系统和网络设备那样受到应有的重视,得到恰当的测试评估。鉴于此,本文提出可以利用两类不同的安全漏洞对SQL Server数据库进行渗透测试,给出具体的测试方法,用以指导信息系统数据库管理员进行自测试评估,及时发现存在的严重安全漏洞,以进一步采取措施,进行漏洞修补。  相似文献   

电容测试法判断测井电缆系统故障     

马世稳  张著军 《中国煤炭地质》2008,(12):44-45

测井电缆因长途颠簸、拉伸及绞车缠绕挤压,电缆连接器、电缆、绞车滑环、滑环连线等部位极易出现故障。电容测试法是一种简易、快速的检测方法,该法可在现场准确诊断出故障电缆的位置。以四芯铠装电缆为例,每根缆芯的正常阻值约为80Ω/1 000m,两缆芯间的分布电容约为170PPF/1 000m。在实际检测中,根据电容较小时测点的位置,可以有效判断故障部位;而电缆故障位置则可利用电阻及电容的线性关系进行计算予以确定。  相似文献   

Timing effects on the fragmentation of small scale blocks of granodiorite     

P. D. Katsabanis  A. Tawadrous  C. Braun  C. Kennedy 《Fragblast: International Journal for Blasting and Fragmentation》2006,10(1):83-93

A series of small scale tests, simulating multi-hole blasts have been performed to establish the effect of delays on blast fragmentation. The blasts were performed in high quality granodiorite blocks, which were cut from stone prepared by dimensional stone quarry operations. The pattern used was equilateral triangular, with a distance of 10.2 cm between boreholes, which had a diameter of 11 mm, were loaded with detonating cord and the coupling medium was water. The delays used were achieved using different lengths of detonating cord for the cases of delays between 0 and 100 μs between holes and a sequential blasting machine firing seismic detonators for larger delays up to 4 ms. All fragments were collected and screened. The experiments showed that the worst fragmentation was achieved with simultaneous initiation of all charges. Fragmentation improved with the delay time between holes up to 1 ms between holes. If the experiments are scaled up, the results show that in granodiorite, fragmentation optimization requires delays of few milliseconds per metre of burden. The findings, agree with previously published work, involving larger scale experiments and other rock types.  相似文献   

Modeling the cyclic swelling pressure of mudrock using artificial neural networks     

M. Moosavi  M.J. Yazdanpanah  R. Doostmohammadi 《Engineering Geology》2006,87(3-4):178-194

The stochastic nature of the cyclic swelling behavior of mudrock and its dependence on a large number of interdependent parameters was modeled using Time Delay Neural Networks (TDNNs). This method has facilitated predicting cyclic swelling pressure with an acceptable level of accuracy where developing a general mathematical model is almost impossible. A number of total pressure cells between shotcrete and concrete walls of the powerhouse cavern at Masjed–Soleiman Hydroelectric Powerhouse Project, South of Iran, where mudrock outcrops, confirmed a cyclic swelling pressure on the lining since 1999. In several locations, small cracks are generated which has raised doubts about long term stability of the powerhouse structure. This necessitated a study for predicting future swelling pressure. Considering the complexity of the interdependent parameters in this problem, TDNNs proved to be a powerful tool. The results of this modeling are presented in this paper.  相似文献   

新近沉积粉细砂层地基的试验与评价     

赵本肖  游占军 《中国煤田地质》2006,18(4):45-46,48

通过对邯郸市某车间地基的勘察．分析和探讨了新近沉积粉细砂地层的勘察手段、其物理力学性质，及其利用载荷试验确定承载力的标准取得了较为满意的结果，提出的一些分析方法，对新近沉积的粉细砂地层的勘察具有一定的借鉴作用。  相似文献   

Site Investigation for the Effects of Vegetation on Ground Stability     

John R. Greenwood  Joanne E. Norris  Jo Wint 《Geotechnical and Geological Engineering》2006,24(3):467-481

The procedure for geotechnical site investigation is well established but little attention is currently given to investigating the potential of vegetation to assist with ground stability. This paper describes how routine investigation procedures may be adapted to consider the effects of the vegetation. It is recommended that the major part of the vegetation investigation is carried out, at relatively low cost, during the preliminary (desk) study phase of the investigation when there is maximum flexibility to take account of findings in the proposed design and construction. The techniques available for investigation of the effects of vegetation are reviewed and references provided for further consideration. As for general geotechnical investigation work, it is important that a balance of effort is maintained in the vegetation investigation between (a) site characterisation (defining and identifying the existing and proposed vegetation to suit the site and ground conditions), (b) testing (in-situ and laboratory testing of the vegetation and root systems to provide design parameters) and (c) modelling (to analyse the vegetation effects).  相似文献