Statistical analyses of Global U-Pb Database 2017     

Stephen J.Puetz  Carlos E.Ganade  Udo Zimmermann  Glenn Borchardt 《地学前缘(英文版)》2018,9(1):121-145

The method of obtaining zircon samples affects estimation of the global U-Pb age distribution.Researchers typically collect zircons via convenience sampling and cluster sampling.When using these techniques,weight adjustments proportional to the areas of the sampled regions improve upon unweighted estimates.Here,grid-area and modern sediment methods are used to weight the samples from a new database of 418,967 U-Pb ages.Preliminary tests involve two age models.Model-1 uses the most precise U-Pb ages as the best ages.Model-2 uses the~(206)Pb/~(238)U age as the best age if it is less than a1000 Ma cutoff,otherwise it uses the~(207)Pb/~(206)Pb age as the best age.A correlation analysis between the Model-1 and Model-2 ages indicates nearly identical distributions for both models.However,after applying acceptance criteria to include only the most precise analyses with minimal discordance,a histogram of the rejected samples shows excessive rejection of the Model-2 analyses around the1000 Ma cutoff point.Because of the excessive rejection rate for Model-2,we select Model-1 as the preferred model.After eliminating all rejected samples,the remaining analyses use only Model-1 ages for five rock-type subsets of the database:igneous,meta-igneous,sedimentary,meta-sedimentary,and modern sediments.Next,time-series plots,cross-correlation analyses,and spectral analyses determine the degree of alignment among the time-series and their periodicity.For all rock types,the U-Pb age distributions are similar for ages older than 500 Ma,but align poorly for ages younger than 500 Ma.The similarities(500 Ma)and differences(500 Ma)highlight how reductionism from a detailed database enhances understanding of time-dependent sequences,such as erosion,detrital transport mechanisms,lithification,and metamorphism.Time-series analyses and spectral analyses of the age distributions predominantly indicate a synchronous period-tripling sequence of~91-Myr,~273-Myr,and~819-Myr among the various rock types.  相似文献   

Reply: Bulk sampling of coarse clastic sediments for particle-size analysis     

Stephen J. Gale  Peter G. Hoare 《地球表面变化过程与地形》1994,19(3):263-268

The work of Gale and Hoare (1992) provides a guide to the minimum mass of bulk sample required to obtain a reproducible measure of the complete particle-size distribution of coarse clastic sediments such as till, fluvial gravel and beach gravel. Dunkerley (1994) makes a number of criticisms and misrepresentations of this procedure. These are systematically refuted and corrected here, and further data obtained from till and beach gravel are provided to support the criterion adopted by Gale and Hoare (1992) for sample reliability. The procedure of Gale and Hoare (1992) is confirmed as a practical guide to the mass of bulk sample required to obtain a reliable measure of the particle-size distribution of coarse clastic sediment.  相似文献   

Meteorology and haze structure during AGASP-II,Part 1: Alaskan Arctic flights, 2–10 April 1986     

G. A. Herbert  R. C. Schnell  H. A. Bridgman  B. A. Bodhaine  S. J. Oltmans  G. E. Shaw 《Journal of Atmospheric Chemistry》1989,9(1-3):17-48

The second Arctic Gas and Aerosol Sampling Program (AGASP-II) was conducted across the Alaskan and Canadian Arctic in April 1986, to study the in situ aerosol, and the chemical and optical properties of Arctic haze. The NOAA WP-3D aircraft, with special instrumentation added, made six flights during AGASP-II. Measurements of wind, pressure, temperature, ozone, water vapor, condensation nuclei (CN) concentration, and aerosol scattering extinction (b_sp) were used to determine the location of significant haze layers. The measurements made on the first three flights, over the Arctic Ocean north of Barrow and over the Beaufort Sea north of Barter Island, Alaska are discussed in detail in this report of the first phase of AGASP II. In the Alaskan Arctic the WP-3D detected a large and persistent region of haze between 960 and 750 mb, in a thermally stable layer, on 2, 8, and 9 April 1986. At its most dense, the haze contained CN concentrations >10,000 cm^–3 and b_sp of 80×10^–6 m^–1 suggesting active SO₂ to H₂SO₄ gas-to-particle conversion. Calculations based upon observed SO₂ concentrations and ambient relative humidities suggest that 10⁴–10⁵ small H₂SO₄ droplets could have been produced in the haze layers. High concentrations of sub-micron H₂SO₄ droplets were collected in haze. Ozone concentrations were 5–10 ppb higher in the haze layers than in the surrounding troposphere. Outside the regions of haze, CN concentrations ranged from 100 to 400 cm^–3 and b_sp values were about (20–40)×10^–6 m^–1. Air mass trajectories were computed to depict the air flow upwind of regions in which haze was observed. In two cases the back trajectories and ground measurements suggested the source to be in central Europe.  相似文献   

Estimation of soil loss at a regional scale based on plot measurements—some critical considerations     

J. M. Roels 《地球表面变化过程与地形》1985,10(6):587-595

The paper is prompted by apparent deficiencies in the design of plot studies in regional erosion surveys. The principal shortcomings of observational erosion research have been poor sampling design and inadequate analyses of data. The paper identifies various sources of bias which must be taken into account before plot data can be extrapolated to land units in a regional survey. Judging from soil loss data of a case-study in the Ardèche rangelands one may conclude that even accurate plot measurements can still be rather a rough basis for regional erosion assessment. Finally, the paper highlights strategies that might be used to improve erosion sampling.  相似文献   

Personal Sampler for Viable Airborne Microorganisms: Main Development Stages     

Igor E. Agranovski 《洁净——土壤、空气、水》2007,35(1):111-117

A new personal bioaerosol sampler has been developed and verified as an efficient tool for monitoring of viable/non‐viable airborne microorganisms, including bacteria, fungi, and viruses. The operational principle of the device is based on continuous passage of an air sample through porous media submerged into a liquid layer. During motion along narrow and tortuous ways inside the porous media, the air stream is split into a large number of ultra small bubbles with the particulates are being scavenged by these bubbles and, thus, effectively trapped. The device was initially verified for monitoring of viable airborne bacteria and fungi, firstly, under controlled laboratory conditions and later in a field. It was demonstrated that bacterial recovery rates for these two groups of microorganisms were very high and the device was found to be fully feasible for such monitoring. The next step of the device investigation was performed in the laboratory on monitoring viable airborne viruses with a range of sensitivities to physical and biological stresses. As the result, the new personal sampler demonstrated a very high recovery rate even for viruses which are rather sensitive to environmental stress (Avian Influenza, SARS, Mumps, etc.). Some following field studies, undertook in a hospital and animal houses, also demonstrated an excellent performance of the new device for selective and reliable monitoring of viable airborne viruses even in environments highly contaminated by other microorganisms. This paper reviews the main development staged of the new personal bioaerosol sampler.  相似文献   

A BME solution of the inverse problem for saturated groundwater flow   总被引：3，自引：3，他引：0  

M. L.?SerreEmail author  G.?Christakos  H.?Li  C. T.?Miller 《Stochastic Environmental Research and Risk Assessment (SERRA)》2003,17(6):354-369

In most real-world hydrogeologic situations, natural heterogeneity and measurement errors introduce major sources of uncertainty in the solution of the inverse problem. The Bayesian Maximum Entropy (BME) method of modern geostatistics offers an efficient solution to the inverse problem by first assimilating various physical knowledge bases (hydrologic laws, water table elevation data, uncertain hydraulic resistivity measurements, etc.) and then producing robust estimates of the subsurface variables across space. We present specific methods for implementing the BME conceptual framework to solve an inverse problem involving Darcys law for subsurface flow. We illustrate one of these methods in the case of a synthetic one-dimensional case study concerned with the estimation of hydraulic resistivity conditioned on soft data and hydraulic head measurements. The BME framework processes the physical knowledge contained in Darcys law and generates accurate estimates of hydraulic resistivity across space. The optimal distribution of hard and soft data needed to minimize the associated estimation error at a specified sampling cost is determined. This work was supported by grants from the National Institute of Environmental Health Sciences (Grant no. 5 P42 ES05948 and P30ES10126), the National Aeronautics and Space Administration (Grant no. 60-00RFQ041), the Army Research Office (Grant no. DAAG55-98-1-0289), and the National Science Foundation under Agreement No. DMS-0112069.  相似文献   

Scalar Similarity for Relaxed Eddy Accumulation Methods     

Johannes Ruppert  Christoph Thomas  Thomas Foken 《Boundary-Layer Meteorology》2006,120(1):39-63

The relaxed eddy accumulation (REA) method allows the measurement of trace gas fluxes when no fast sensors are available for eddy covariance measurements. The flux parameterisation used in REA is based on the assumption of scalar similarity, i.e., similarity of the turbulent exchange of two scalar quantities. In this study changes in scalar similarity between carbon dioxide, sonic temperature and water vapour were assessed using scalar correlation coefficients and spectral analysis. The influence on REA measurements was assessed by simulation. The evaluation is based on observations over grassland, irrigated cotton plantation and spruce forest.Scalar similarity between carbon dioxide, sonic temperature and water vapour showed a distinct diurnal pattern and change within the day. Poor scalar similarity was found to be linked to dissimilarities in the energy contained in the low frequency part of the turbulent spectra ( < 0.01 Hz).The simulations of REA showed significant change in b-factors throughout the diurnal course. The b-factor is part of the REA parameterisation scheme and describes a relation between the concentration difference and the vertical flux of a trace gas. The diurnal course of b-factors for carbon dioxide, sonic temperature and water vapour matched well. Relative flux errors induced in REA by varying scalar similarity were generally below ± 10%. Systematic underestimation of the flux of up to − 40% was found for the use of REA applying a hyperbolic deadband (HREA). This underestimation was related to poor scalar similarity between the scalar of interest and the scalar used as proxy for the deadband definition.  相似文献   

从PM10的测量推测成都市区汞污染的来源     

李奕霖  ;张成江  ;施泽明  ;郭亚杰 《辽宁气象》2007,(6):68-71

通过2007年5—6月期间测量成都市若干条剖面上大气可吸入颗粒物（PM10）中的汞含量，来推测成都市大气中汞的来源。结果表明：在12个点的测量范围内，成都市PM10的质量平均浓度为210．8μg／m^3；PM10中汞的质量平均浓度为0．36ng／m^3。公园和郊区PM10浓度和其中汞浓度均较少，可能与植被茂盛有关。由PM10中汞的分布可知，在热电厂、停用的生活垃圾堆放场和寺庙附近出现最高值。说明热电厂和生活垃圾堆放场是大气汞污染的重要次生来源。寺庙附近出现的高汞值，推测与寺庙的礼仪活动如香烛燃烧有关。  相似文献   

Differences in trace metal concentrations among fluvial morphologic units and implications for sampling   总被引：2，自引：0，他引：2  

S. C. Ladd  W. A. Marcus  S. Cherry 《Environmental Geology》1998,36(3-4):259-270

 This study examines the segregation of trace metals within and between fluvial morphologic units in sand-sized and finer bed sediments in a cobble bed stream. The types of fluvial morphologic units sampled are low gradient riffles, high gradient riffles, glides, eddy drop zones, lateral scour pools, attached bars, and detached bars. Three to nine samples were collected from ten of each type of morphologic unit. All 12 metals show significantly different concentrations between some morphologic units in sediments smaller than 2 mm. Eddy drop zones and attached bars consistently have the highest metal concentrations, while low gradient riffles, high gradient riffles, and glides typically have the lowest concentrations. Metals showing the greatest between-unit variability are Al, Cr, Fe, Cu, and Ti, followed by Co, Mn, and Pb, while Mg, Mn, V, and Zn display relatively few differences between units. Lateral and longitudinal variations of metals within units are not significant, and there was no consistent, predictable variation in metal concentrations with distance downstream. Results indicate that metal studies in other gravel- and cobble-bed streams should include a reconnaissance survey to determine variations between morphologic units, stratify sampling by morphologic unit, and analyze spatial autocorrelation to determine sample spacing. Received: October 1997 · Accepted: 23 March 1998  相似文献   

低频时码信号正交解调技术研究   总被引：2，自引：1，他引：1  

刘军  吴贵臣 《时间频率学报》2001,24(1):22-29

采用正交叠加和正交采样技术，提出了更大程度上数字化的低频时码信号正交解调的设计方案。同时，分析了这种解调方法的虚假抑制和抗镜像干扰能力。分析表明所论述的解调技术易于实现数字化，且成本低廉，具有一定的实用价值。  相似文献