Depositional System of the Carboniferous Huanglong Formation, Eastern Sichuan Basin: Constraints from Sedimentology and Geochemistry     

WANG Kun  HU Suyun  LI Wei  LIU Wei  HUANG Qingyu  MA Kui  SHI Shuyuan 《《地质学报》英文版》2016,90(5):1795-1808

Using analyses of the lithology, sequences, paleoenvironment, and tectonic setting, the depositional system of the Carboniferous Huanglong Formation in the eastern Sichuan Basin was identified. The lithological characteristics of the Lower Member, Middle Member, and Upper Member were analyzed and classified. Before the use of carbon, oxygen, and strontium isotopes in the analysis, all of the geochemical data were tested for validity. On the basis of the Z values obtained from carbon and oxygen isotopes, the paleoenvironments of the three members were elucidated. Lower Member was dominantly an enclosed marine environment with intense evaporation and little freshwater input into the sea. Middle Member developed in a semi-enclosed to normal marine environment with many rivers. Upper Member was formed in a normal marine environment. The east Sichuan Basin was enclosed by paleouplifts before the deposition of the Huanglong Formation, forming a relatively enclosed depositional setting. Paleogullies developed in the Silurian strata that underlie the Carboniferous rocks; these paleogullies can be identified. On the basis of a comprehensive analysis, we propose that the Huanglong Formation developed in a platform system. Four microfacies were identified: supratidal flat, dolostone flat, grain shoal, and shelf microfacies. The high-permeability and high-porosity characteristics of the grain shoal microfacies are favorable for hydrocarbon accumulation, while the supratidal flat and shelf microfacies developed very few high-quality reservoirs. The paleogullies, in which increased amounts of grain shoal microfacies developed, controlled the distribution of high-quality reservoirs.  相似文献   

四川观音梁子锰矿床地质特征及找矿意义          下载免费PDF全文

郑辉 《地质找矿论丛》2016,31(3):317-324

观音梁子锰矿赋存于寒武系邱家河组中,是龙门山中段在邱家河组中新发现的工业锰矿床。通过矿区勘探工作及室内观察、测试等手段,对矿区成矿地质背景、含锰岩系、矿体及矿石矿物特征、矿床成因、找矿前景等方面进行了初步总结分析。研究发现,观音梁子锰矿为典型的沉积型锰矿床,矿体呈层状产于邱家河组三段硅质白云岩中,延伸较稳定,严格受层位的控制;矿石类型为菱锰矿型,主要由菱锰矿、硫锰矿、水锰矿等组成。早寒武世,龙门山地区由于地壳拉张裂陷形成深海盆地,在还原环境下,锰元素与碳酸根直接结合形成碳酸锰矿物,稳定的物源、深海还原环境为锰矿富集提供了有利的成矿环境。观音梁子锰矿的发现,证实了龙门山北段邱家河组含锰层位的存在,为龙门山中段的锰矿找矿提供了契机,同时显示了寒武系邱家河组具有良好的找锰远景。  相似文献   

川西龙门山前陆盆地晚新生代沉积记录与构造响应     

白毛伟  谢小平  陈芝聪 《江苏地质》2016,40(4):640-645

龙门山前陆盆地位于青藏高原东缘,夹于龙门山推覆造山带与龙泉山褶断带之间。自4.6 Ma以来,逆冲推覆构造运动使龙门山造山带强烈隆升,古河流的侵蚀、搬运和堆积作用使盆地沉积了1套巨厚的半固结—松散堆积物。通过对沉积特征和沉积结构的综合研究,认为龙门山前陆盆地是由自东向西的深部多级俯冲潜滑而引起的浅部由西向东的多层次推覆作用形成的,其晚新生代逆冲推覆构造所产生的构造负载是龙门山前陆盆地的成盆动力。岩浆物质的循环过程表明成都盆地在形成过程中遵循物质循环与能量守恒定律。龙门山前陆盆地地质构造的沉积响应表现为:沉积基底整体上向西倾斜,盆地剖面明显不对称;沉积地层与下伏地层均为不整合接触;盆内发育了一系列相间排列的次级凹陷和凸起,并呈雁斜式展布;砾质粗碎屑楔状体的周期性发育。从盆地动力学的角度初步分析了龙门山前陆盆地盆-山耦合关系,龙门山冲断带及其前陆盆地的研究对于大地构造位置、成矿作用以及油气聚集地的勘探等具有重要意义。  相似文献   

滇东南安那金矿床成矿流体地球化学研究   总被引：1，自引：1，他引：0  

董文斗  沈能平  苏文超  蔡佳丽 《岩石学报》2016,32(11):3321-3330

云南安那金矿床位于右江盆地南缘,产于二叠纪辉绿岩侵入体之中,广泛发育乳白色石英网脉,蚀变辉绿岩体即为金矿体。与右江盆地以沉积岩为容矿岩石的卡林型金矿床类似,具有硅化、粘土化、碳酸盐化和硫化物化等热液蚀变特征。本文对安那金矿床石英中的流体包裹体岩相学、显微测温学、激光拉曼光谱以及氢氧同位素组成进行了分析,发现成矿期石英中的流体包裹体主要为富含CO_2气-液两相或三相流体包裹体,其均一温度范围为208~312℃(平均254℃),盐度很低,变化范围为0~2%Na Cleqv,成矿溶液的密度为0.88~0.98g/cm~3,表明形成安那金矿床的成矿流体属于中温、低盐度、中-低密度的流体。激光拉曼光谱分析显示,石英中包裹体的气相成分富含CO_2、N_2以及微量CH_4等挥发分。成矿流体的氢氧同位素组成显示变质流体成因,结合矿石显微岩相学结构,认为流体溶蚀交代辉绿岩中的含Ti-Fe辉石或者钛铁矿,溶解Fe的硫化作用过程是含Au黄铁矿和毒砂沉淀富集的重要机制。成矿作用可能与右江盆地南缘印支期造山事件有关。  相似文献   

Nano-scale pore structure and fractal dimension of organic-rich Wufeng-Longmaxi shale from Jiaoshiba area,Sichuan Basin: Investigations using FE-SEM,gas adsorption and helium pycnometry     

《Marine and Petroleum Geology》2016

Much attention have been recently paid to the upper Ordovician Wufeng shale (O₃w) and lower Silurian Longmaxi shale (S₁l) in the Jiaoshiba area of Sichuan Basin, which is now the largest producing shale gas field in China. Field emission scanning electron microscopy (FE-SEM), low pressure gas (N₂ and CO₂) adsorption, helium pycnometry, X-ray diffraction and geochemical analyses were performed to investigate the pore structure and fractal dimension of the pores in O₃w-S₁l shale formation in the Jiaoshiba area. FE-SEM images show that organic matter (OM) pores are dominant in the organic-rich samples and these pores are often irregular, bubble-like, elliptical and faveolate in shape, while in organic-poor samples, limited and isolated interparticle (interP), intraparticle (intraP) and OM pores are observed. Reversed S-shaped isotherms obtained from nitrogen adsorption are type Ⅱ, and hysteresis loops indicate that the shape of micropore in the samples is slit-or plate-like. BET surface areas and total pore volume vary from 12.2 to 27.1 m²/g and from 1.8 × 10⁻² to 2.9 × 10⁻² cm³/g, with an average of 19.5 m²/g and 2.3 × 10⁻² cm³/g, respectively. Adsorption volume from both N₂ and CO₂ adsorption increases with respect to TOC contents. Porosities obtained from helium porosimetry are comparable with these from gas (CO₂ and N₂) adsorption in O₃w-S₁l shale. However, porosity determined by quantitative FE-SEM analysis is much smaller, which is mainly related to limited resolution and the small areas of investigation.Based on the Frenkel-Halsey-Hill (FHH) model of low-pressure N₂ adsorption, fractal dimensions of the pores varied from 2.737 to 2.823. Relationships between pore structure parameters and TOC content, mineral composition and fractal dimension reveal that the fractal dimension is mainly associated with micropores. Samples with higher TOC content, higher quartz content and lower clay content tend to contain more heterogeneous micropores, resulting in higher fractal dimensions and more complicated pore structure in shales. Therefore, fractal dimension is an effective parameter to reflect the complexity of pore structure and the degree of micropore development in O₃w-S₁l shale.  相似文献   

Hydrothermal Fluid Sources of the Fengjia Barite–fluorite Deposit in Southeast Sichuan,China: Evidence from Fluid Inclusions and Hydrogen and Oxygen Isotopes          下载免费PDF全文

Hao Zou  Shou‐ting Zhang  An‐qing Chen  Yi Fang  Zhao‐fa Zeng 《Resource Geology》2016,66(1):24-36

The Fengjia barite–fluorite deposit in southeast Sichuan is a stratabound ore deposit which occurs mainly in Lower Ordovician carbonate rocks. Here we present results from fluid inclusion and oxygen and hydrogen isotope studies to determine the nature and origin of the hydrothermal fluids that generated the deposit. The temperature of the ore‐forming fluid shows a range of 86 to 302 °C. Our detailed microthermometric data show that the temperature during mineralization of the fluorite and barite in the early ore‐forming stage was higher than that during the formation of the calcite in the late ore‐forming stage. The salinity varied substantially from 0.18% to 21.19% NaCl eqv., whereas the density was around 1.00 g/cm³. The fluid composition was mainly H₂O (>91.33%), followed by CO₂, CH₄ and traces of C₂H₆, CO, Ar, and H₂S. The dominant cation was Na⁺ and the dominant anion Cl^‐, followed by Ca²⁺, SO₄^2‐, K⁺, and Mg²⁺, indicating a mid–low‐temperature, mid‐low‐salinity, low‐density NaCl–H₂O system. Our results demonstrate that the temperature decreased during the ore‐forming process and the fluid system changed from a closed reducing environment to an open oxidizing environment. The hydrogen and oxygen isotope data demonstrate that the hydrothermal fluids in the study area had multiple sources, primarily formation water, as well as meteoric water and metamorphic water. Combined with the geological setting and mineralization features we infer that the stratabound barite–fluorite deposits originated from mid–low‐temperature hydrothermal fluids and formed vein filling in the fault zone.  相似文献   

东非鲁伍马盆地深水区构造-沉积演化过程及油气地质特征   总被引：1，自引：0，他引：1  

陈宇航  姚根顺  吕福亮  唐鹏程  鲁银涛 《海相油气地质》2016,(2):39-46

利用深水区的二维、三维地震资料开展构造-沉积演化研究,鲁伍马盆地二叠纪—早侏罗世为冈瓦纳陆内—陆间裂谷活动期,发育河流—湖泊沉积;中侏罗世—早白垩世为马达加斯加漂移期,位于剪切型大陆边缘,发育海陆过渡相沉积;晚白垩世—渐新世为被动大陆边缘期,深水沉积广泛发育,重力流沉积延伸至戴维隆起带;中新世—第四纪为东非裂谷海域分支活动期,陆坡和凯瑞巴斯地堑发育深水重力流沉积。盆地垂向上形成"断—坳—断"结构,二叠纪—早侏罗世及中新世—现今发育两期明显的裂谷活动。马达加斯加漂移期的海相泥岩为深水区的主力烃源岩,古近纪的陆坡深水浊积砂体为主要储层。东非裂谷海域分支的断层活动沟通了下伏烃源岩,晚期断层不发育的西部陆坡成为主要的油气聚集区。  相似文献   

川西坳陷东坡沙溪庙组气藏成藏演化模式   总被引：1，自引：0，他引：1  

徐敏  刘建  林小云  熊山  牛斌莉 《现代地质》2018,32(5):953

川西坳陷东坡气藏主力产层为沙溪庙组,其圈闭类型以构造-岩性圈闭为主,多为致密砂岩储层,但断层发育,有效改善了储层物性,断砂匹配样式与构造演化对油气成藏过程有重要影响。基于前人已有的认识,通过沙溪庙组气藏成藏动力演化、气水分布特征及生烃期次分析,结合构造演化、成藏幕次等研究,认为沙溪庙组天然气成藏受构造古隆起、断砂配置、储层物性、构造演化影响,形成了“构造控向、断砂控运、储层控藏、演化控调”的成藏演化模式,同中存异,高庙子地区古构造的控制作用更为明显,而中江地区岩性控制作用占主导。沙溪庙组气藏间歇性充注具“燕山期三幕成藏,喜山期调整改造”的成藏特征,多期构造演化和较强的储层非均质性影响了含气饱和度,导致沙溪庙组气藏分布、气藏产能差异大。  相似文献   

四川江油马角坝刺林包剖面二叠-三叠系间粘土岩研究     

邓煜霖  郎兴海  崔志伟  王旭辉  娄渝明  韩鹏 《岩石矿物学杂志》2018,37(3):417-433

二叠-三叠纪之交华南地区普遍发育火山成因的粘土岩,其对于了解二叠纪末大规模火山活动及扬子板块碎屑物质来源具有重要意义。本文对扬子西缘马角坝刺林包剖面飞仙关组底部粘土岩进行了碎屑锆石U-Pb定年及原位Hf同位素测试、X衍射和全岩地球化学分析,以揭示粘土岩的岩石成分及物源信息。镜下特征、X衍射及主量元素特征表明岩石中粘土矿物主要为伊利石,含少量方解石、石英。碎屑锆石年龄显示,特征峰值年龄主要集中在2 615~2 383、1 868~1 328、1 186~778和430~246 Ma,并出现~250 Ma特征高峰,结合原位Hf同位素特征表明锆石与秦岭造山带、华南典型PTB剖面粘土岩及峨眉山大火成岩省具有较高的相似性。同时,通过微量、稀土元素分析发现粘土岩中Zr、Hf、Th、Cr、Co、Ti相对富集,与华南典型PTB粘土岩和峨眉山玄武岩相近,并结合构造背景及锆石特征,综合认为刺林包剖面PTB粘土岩来自于秦岭造山带及龙门山岛链局部剥蚀区、二叠纪末火山活动和峨眉山大火成岩省剥蚀岩体。  相似文献   

川西坳陷新场构造带须家河组超压演化与流体的关系   总被引：1，自引：0，他引：1  

黄丽飞  楼章华  陈明玉  朱蓉  王君 《地质通报》2018,37(5):954-964

沉积盆地超压体系是油气勘探与开发过程中一个不容忽视的问题,不仅影响了地质流体的运移和聚集,更为勘探带来安全隐患。以实测地压和油田水化学数据为基础,对川西坳陷新场构造带须四段和须二段现今地层水矿化度与现今压力系数关系进行比较,结合地层水特征系数和阴阳离子关系,综合前人研究结果,对须四段和须二段压力演化史与地层水演化过程进行分析,考察川西坳陷须家河组超压系统演化与地层水演化的耦合关系。结果表明,须家河组超压发育与地层水具有密切的联系:(1)须家河组储层段压力分布范围较广,在弱超压至超强压之间,须二段属于中超压而须四段属于超高压,平面分布中须二段探测井中矿化度随压力系数增加而减少,须四段则相反;(2)在压实过程中,由于流体排驱受阻导致"欠压实"超压的产生,随着超压的不断积聚,局部出现裂缝,导致地层水更加强烈的混合作用和运移;(3)生烃作用导致自生压力增大,地层水离子水岩作用强烈,造成流体包裹体与现今地层水离子成分分异;(4)构造挤压抬升过程中,须四段裂缝不发育,压力进一步升高,须二段则产生泄压,出现了凝析水和水侵现象,造成须四段和须二段现今地层水特征的差异。  相似文献