Structural controls on Tertiary orogenic gold mineralization during initiation of a mountain belt, New Zealand   总被引：3，自引：2，他引：3  

D. Craw  M. Begbie  D. MacKenzie 《Mineralium Deposita》2006,41(7):645-659

Two types of structurally controlled hydrothermal mineralization have occurred during folding of fissile schist in southern New Zealand: fold-related mineralization and normal fault-related mineralization. Both types have the same mineralogy and textures, and are dominated by quartz–ankerite veins and silicified breccias with ankeritic alteration. Most mineralized zones are thin (centimetre scale), although host schist is commonly impregnated with ankerite up to 20 m away. Thick (up to 5 m wide) mineralized zones are generally gold-bearing and contain pyrite and arsenopyrite with stibnite pods locally. Some of these auriferous zones have been extensively mined historically despite rugged topography and difficult access. Mineralization occurred during regional tectonic compression in the initial stages of development of the Southern Alps mountain belt at the Pacific–Australian plate boundary in the Miocene. Most of the gold-bearing deposits occur in east to south-east, striking normal faults that cut across mesoscopic folds in a belt that coincides with the southern termination of a regional-scale north trending antiform. Mineralized zones have similar structural control and relative timing to a nearby swarm of Miocene lamprophyre dykes and carbonatites. Limited stable isotopic data (C and O) and trace element geochemistry suggest that there was probably no genetic link between the igneous activity and gold mineralization. However, these two types of fluid flow have been controlled by the same tectonically created crustal plumbing system. This Miocene hydrothermal activity and gold deposition demonstrates that orogenic (mesothermal) mineralization can occur during the inception of an orogenic belt, not just in the latter stages as is commonly believed. These Miocene structures have been preserved in the orogen because the locus of uplift has moved northwards, so the early-formed gold deposits have not yet been structurally overprinted or eroded.  相似文献   

The geological and geodynamic evolution of the eastern Black Sea basin: insights from 2-D and 3-D tectonic modelling   总被引：1，自引：0，他引：1  

D. J. Meredith  S. S. Egan 《Tectonophysics》2002,350(2)

Subsidence mechanisms that may have controlled the evolution of the eastern Black Sea have been studied and simulated using a numerical model that integrates structural, thermal, isostatic and surface processes in both two- (2-D) and three-dimensions (3-D). The model enables the forward modelling of extensional basin evolution followed by deformation due to subsequent extensional and compressional events. Seismic data show that the eastern Black Sea has evolved via a sequence of interrelated tectonic events that began with early Tertiary rifting followed by several phases of compression, mainly confined to the edges of the basin. A large magnitude (approximately 12 km) of regional subsidence also occurred in the central basin throughout the Tertiary. Models that simulate the magnitude of observed fault controlled extension (β=1.13) do not reproduce the total depth of the basin. Similarly, the modelling of compressional deformation around the edges of the basin does little to enhance subsidence in the central basin. A modelling approach that quantifies lithosphere extension according to the amount of observed crustal thinning and thickening across the basin provides the closest match to overall subsidence. The modelling also shows that deep crustal and mantle–lithosphere processes can significantly influence the rate and magnitude of syn- to post-rift subsidence and shows that such mechanisms may have played an important role in forming the anomalously thin syn-rift and thick Miocene–Quaternary sequences observed in the basin. It is also suggested that extension of a 40–45 km thick pre-rift crust is required to generate the observed magnitude of total subsidence when considering a realistic bathymetry.  相似文献   

Post-mid-Cretaceous eastern North Sea evolution inferred from 3D thermo-mechanical modelling   总被引：1，自引：0，他引：1  

Lykke Gemmer  Sren B. Nielsen  Mads Huuse  Holger Lykke-Andersen 《Tectonophysics》2002,350(4):105-342

The Late Cretaceous–Cenozoic evolution of the eastern North Sea region is investigated by 3D thermo-mechanical modelling. The model quantifies the integrated effects on basin evolution of large-scale lithospheric processes, rheology, strength heterogeneities, tectonics, eustasy, sedimentation and erosion.

The evolution of the area is influenced by a number of factors: (1) thermal subsidence centred in the central North Sea providing accommodation space for thick sediment deposits; (2) 250-m eustatic fall from the Late Cretaceous to present, which causes exhumation of the North Sea Basin margins; (3) varying sediment supply; (4) isostatic adjustments following erosion and sedimentation; (5) Late Cretaceous–early Cenozoic Alpine compressional phases causing tectonic inversion of the Sorgenfrei–Tornquist Zone (STZ) and other weak zones.

The stress field and the lateral variations in lithospheric strength control lithospheric deformation under compression. The lithosphere is relatively weak in areas where Moho is deep and the upper mantle warm and weak. In these areas the lithosphere is thickened during compression producing surface uplift and erosion (e.g., at the Ringkøbing–Fyn High and in the southern part of Sweden). Observed late Cretaceous–early Cenozoic shallow water depths at the Ringkøbing–Fyn High as well as Cenozoic surface uplift in southern Sweden (the South Swedish Dome (SSD)) are explained by this mechanism.

The STZ is a prominent crustal structural weakness zone. Under compression, this zone is inverted and its surface uplifted and eroded. Contemporaneously, marginal depositional troughs develop. Post-compressional relaxation causes a regional uplift of this zone.

The model predicts sediment distributions and paleo-water depths in accordance with observations. Sediment truncation and exhumation at the North Sea Basin margins are explained by fall in global sea level, isostatic adjustments to exhumation, and uplift of the inverted STZ. This underlines the importance of the mechanisms dealt with in this paper for the evolution of intra-cratonic sedimentary basins.  相似文献   

桩土接触面单元参数分析   总被引：11，自引：0，他引：11       下载免费PDF全文

许宏发  吴华杰  郭少平  廖铁平 《探矿工程》2002,(5):10-12

桩的抗拔特性与接触面的特性密切相关，正确选定接触面的力学参数对于分析桩的抗拔机理有重要意义。根据桩土接触面点面接触模型和库仑摩擦变形原理，在10组土－结构（钢、混凝土）剪切摩擦试验分析的基础上，对桩土接触面摩擦参数的取值问题进行了研究，得到了一些结论，对于桩土接触面力学参数正确取值有一定的参考价值。  相似文献   

2000年4月29日内乡ML4.7级地震前潢川地电异常变化     

张俊山  胡卫建  王志敏  张佩  谢健健  刘丽君 《华南地震》2002,22(3):65-70

2000年4月29日11时54分，河南省南阳市内乡县马山口镇与镇平县寺山乡之间发生一次ML4.7级地震。地震前3天，潢山台视电阻率ρs异常较为明显。分析了此次异常与内乡ML4.7级地震的关系，认为此次异常很有可能是内乡ML4.7级地震的短临前兆异常。当观测台站与震源位于同一构造带时，即便离震中较远，地电阻率对地震异常反映仍较灵敏，且与构造带同一走向的测向尤为明显。  相似文献   

喀什"奇异震群"与构造地震的对比研究     

夏爱国  刘永廷  缑兰兰 《内陆地震》2002,16(3):193-204

20 0 1年 11月 14、 15日新疆喀什台记录到 86次振动事件 (“奇异震群”事件 )。为识别其性质 ,应用波谱分析、偏振分析等方法 ,对该事件和同范围构造地震的地震波特征进行了对比研究 ,发现 :(1)喀什“震群”的全波列衰减比构造地震的全波列衰减快很多 ;(2 )与构造地震的速度谱相比 ,“震群”的频谱相对较为“集中”,而构造地震的则较为“发散”;(3)“震群”位移谱的拐角频率和卓越频率均较构造地震的相应量高出一倍多 ,且离散较小。通过对喀什“奇异震群”这些特征进行分析研究 ,认为这一事件极有可能是人工事件  相似文献   

泾阳4.8级地震的构造背景   总被引：12，自引：1，他引：12       下载免费PDF全文

王卫东 《地震工程学报》2002,24(2):145-149

1998年1月5日烃阳Ms 4.8地震是陕西省近40年来发生的最大一次地震。研究了此次地震的构构背景和地球物理场特征。  相似文献   

Sea cliffs resulting from late Miocene extensional tectonics: the Serra Gelada case study (Betic Cordillera, Spain)     

Alfonso Ybenes  Pedro Alfaro  Jos Delgado  Antonio Estvez  Jesús M. Soria 《Geomorphology》2002,42(3-4)

The Serra Gelada sea cliffs are carved in Mesozoic carbonate rocks belonging to the External Zones of the eastern Betic Cordillera (Alicante, SE Spain). Several normal faults with vertical slips of more than a hundred metres have played an important role in the origin of this coastline. Some previous studies propose that the present cliff morphology was mainly originated by Quaternary fault activity. However, the integration of geomorphological features, stratigraphical and sedimentological data, together with the results of the tectonic analysis of fractures occurring in Serra Gelada, and a detailed study of seismic reflection profiles carried out in the adjacent continental shelf, indicate that these normal faults were active mainly during the late Miocene. Therefore, the Serra Gelada sea cliffs represent a tectonically controlled long-term landscape. Thus, normal faults have not significantly modified the Serra Gelada relief since then. Furthermore, the northern part of the Serra Gelada cliff may be considered as an inherited pre-Quaternary relict palaeocliff since it has only undergone very little erosive recession.  相似文献   

Effective timescales of coupling within fluvial systems   总被引：1，自引：0，他引：1  

Adrian M. Harvey   《Geomorphology》2002,44(3-4)

This paper presents a review of the coupling concept in fluvial geomorphology, based mainly on previously published work. Coupling mechanisms link the components of the fluvial system, controlling sediment transport down the system and the propagation of the effects of base-level change up the system. They can be viewed at several scales: at the local scale involving within-hillslope coupling, hillslope-to-channel coupling, and within-channels, tributary junction and reach-to-reach coupling. At larger scales, coupling can be considered as zonal coupling, between major zones of the system or as regional coupling, relating to complete drainage basins. These trends are illustrated particularly by the examples of hillslope-to-channel coupling in the Howgill Fells, northwest England, badland systems in southeast Spain, alluvial fans in Spain, USA and UAE, and base-level-induced dissection of Neogene sedimentary basins in southeast Spain. As the spatial scales increase, so do the timescales involved. Effective temporal scales relate to magnitude and frequency characteristics, recovery time and propagation time, the relative importance changing with the spatial scale. For downsystem coupling at the local scale, the first two are important, with propagation time increasing in importance in larger systems, especially in those involving upsystem coupling related to base-level change. The effective timescales range from the individual event, with a return period of decades, through decadal to century timescales for downsystem coupling, to tens to hundreds of thousands of years for the basinwide response to base-level change. The effective timescales influence the relative importance of factors controlling landform development.  相似文献   

川西攀枝花—西昌地区结晶基底的划分   总被引：7，自引：0，他引：7  

马玉孝王大可  纪相田阚泽忠张成江  周美夫 《地质通报》2003,22(9):688-694

长期以来，由于同位素年龄依据不足和没有正确区分晚二叠世热接触变质岩、喜马拉雅期动力变质岩与前震旦纪区域变质岩，攀西地区结晶基底的划分存在许多困难和问题。本文依据1：50000区域地质调查结果，将原仁和群(Pt1R)修改为晚二叠世岩浆岩和喜马拉雅期动力变质岩，将五马箐(岩)组(Pt1w)和顶针杂岩(Pt1D)修改为晚二叠世热接触变质岩和喜马拉雅期动力变质岩，将安宁村组(Ptlα)和纸房沟组(Pt1z)修改为震旦系地层，并依据岩石学、岩石化学和微量元素地球化学特征，将结晶基底划分为变质侵入体、变质表壳岩和TTG套岩，论述了结晶基底的成因和演化。  相似文献