井间地震层析成像分辨率研究   总被引：12，自引：1，他引：11  

裴正林  余钦范  狄帮让 《物探与化探》2002,26(3):218-224

通过大量数值模型试验,并根据射线密度、射线正交性和点扩散函数,对井间地震层析成像的分辨率问题进行了研究。结果表明,井间地震层析成像的分辨率在空间上是可能性变的,垂直方向的分辨率好于水平方向,而且高速异常体和低速异常体的图像形态和分辨率是非一致的。高速异常体波形CT的图像水平方向最小分辨率距离为1/2波长,垂直分辨率最小分辨率距离为3/10波长;而低速异常体的波形CT图像的水平方向的最小分辨率约为2/5波长,垂向最小分辨率约1/5个波长;走时CT的图像水平方向最小分辨率为3个像元,垂直方向的最小分辨率距离为2个像元;当井深与井间距之比为2时,图像分辨率最高。  相似文献   

工业CT技术在卫星产品检测中的应用   总被引：2，自引：0，他引：2  

倪培君  李旭东  梁晓明  王爱华  孙守黑 《CT理论与应用研究》2000,9(Z1):119-123

卫星产品许多都采用了焊接结构。为了保证其使用的安全可靠性,必须对焊缝进行l00％的无损检测。然而对于一些形状复杂的精密电子束焊件,由于产品尺寸小,加之焊缝周围结构的遮挡,使常规方法的应用受到了限制。工业CT技术具有不受试件材料种类、形状结构及表面状况限制的特点,能给出与试件材料密度及尺寸特性相对应的断层扫描图象,分辨率高,在检测复杂构件方面显示出了优势。本文介绍了卫星产品精密复杂焊接件对无损检测技术的具体要求,研究了卫星产品电子束焊缝的工业CT检测方法,包括设备、对比试样、检测工艺、评定方法等,并通过电磁阀、喷注器、自锁阀、减压器、加注/排放阀、单向阀、气滤、过滤器等具体产品检测实例,描述了工业CT技术在卫星产品检测中的应用。实际应用表明：工业CT是检测航天卫星产品精密复杂结构件焊缝缺陷的理想手段,其成象直观,缺陷的定位、定性和定量结果可靠,完全能满足产品的质量控制要求。目前,累计用工业CT检测卫星产品数批若干件,检测焊缝上千条。剔出有超标缺陷的产品40件,避免了隐患。经过工业CT检测的产品,己在"返回式卫星"、"风云二号"、"东方红三号"、"资源一号"、"中星-22号"等型号卫星中取得了成功应用。  相似文献   

Reliability of dipole-dipole electrical resistivity tomography for defining depth to bedrock in covered karst terranes     

W. Zhou  B. F. Beck  J. B. Stephenson 《Environmental Geology》2000,39(7):760-766

 Sinkhole collapse is one of the main limitations on the development of karst areas, especially where bedrock is covered by unconsolidated material. Studies of sinkhole formation have shown that sinkholes are likely to develop in cutter (enlarged joint) zones as a result of subterranean erosion by flowing groundwater. Because of the irregular distribution of pinnacles and cutters on the bedrock surface, uncertainties arise when "hit-or-miss" borehole drilling is used to locate potential collapse sites. A high-resolution geophysical technique capable of depicting the details of the bedrock surface is essential for guiding the drilling program. Dipole-dipole electrical resistivity tomography (ERT) was used to map the bedrock surface at a site in southern Indiana where limestone is covered by about 9 m of clayey soils. Forty-nine transects were conducted over an area of approximately 42,037 m². The electrode spacing was 3 m. The length of the transects varied from 81 to 249 m. The tomographs were interpreted with the aid of soil borings. The repeatability of ERT was evaluated by comparing the rock surface elevations interpreted from pairs of transects where they crossed each other. The average difference was 2.4 m, with a maximum of 10 m. The discrepancy between interpreted bedrock-surface elevations for a transect intersection may be caused by variations in the subsurface geology normal to the transect. Averaging the elevation data interpreted from different transects improved the ERT results. A bedrock surface map was generated using only the averaged elevation data at the transect junctions. The accuracy of the map was further evaluated using data from four exploratory boreholes. The average difference between interpreted and actual bedrock surface-elevations was less than 0.4 m. The map shows two large troughs in the limestone surface: one coinciding with an existing sinkhole basin, while the other is in alignment with a small topographic valley. Because sinkholes were observed at the same elevation interval in similar valleys in the vicinity, the delineated trough may have implications for future land use at the site. Received: 4 January 1999 · Accepted: 8 March 1999  相似文献   

Constraining P-wave velocity variations in the upper mantle beneath Southeast Asia     

Chang Li  Robert D. van der Hilst  M. Nafi Toksöz 《Physics of the Earth and Planetary Interiors》2006,154(2):180-195

We have produced a P-wave model of the upper mantle beneath Southeast (SE) Asia from reprocessed short period International Seismological Centre (ISC) P and pP data, short period P data of the Annual Bulletin of Chinese Earthquakes (ABCE), and long period PP-P data. We used 3D sensitivity kernels to combine the datasets, and mantle structure was parameterized with an irregular grid. In the best-sampled region our data resolve structure on scale lengths less than 150 km. The smearing of crustal anomalies to larger depths is reduced by a crustal correction using an a priori 3D model. Our tomographic inversions reveal high-velocity roots beneath the Archean Ordos Plateau, the Sichuan Basin, and other continental blocks in SE Asia. Beneath the Himalayan Block we detect high seismic velocities, which we associate with subduction of Indian lithospheric mantle. This structure is visible above the 410 km discontinuity and may not connect to the remnant of the Neo-Tethys oceanic slab in the lower mantle. Our images suggest that only the southwestern part of the Tibetan plateau is underlain by Indian lithosphere and, thus, that the upper mantle beneath northeastern Tibet is primarily of Asian origin. Our imaging also reveals a large-scale high-velocity structure in the transition zone beneath the Yangtze Craton, which could have been produced in multiple subduction episodes. The low P-wave velocities beneath the Hainan Island are most prominent in the upper mantle and transition zone; they may represent counter flow from the surrounding subduction zones, and may not be unrelated to processes beneath eastern Tibet.  相似文献   

几种静校正方法的比较研究   总被引：3，自引：4，他引：3  

何光明  贺振华  黄德济  王翠华 《物探化探计算技术》2006,28(4):310-314

为解决近地表速度异常和地形起伏引起的静校正问题,已出现了多种静校正方法,这常常使资料处理人员无所适从。这里从众多的静校正方法中选择了三个具有代表性的,在生产中用得较多的方法(折射静校正、无射线追踪层析静校正、非线性层析静校正),从方法原理、方法特点、实际应用效果等方面进行了比较研究,最后给出了针对不同目标选择适当静校正方法的建议,以帮助资料处理人员在实际资料处理中,有针对性地选择静校正方法,快速有效地完成资料处理任务,提高处理质量。  相似文献   

中心回线瞬变电磁探测的一种快速解释方法   总被引：3，自引：0，他引：3  

郭文波  宋建平  韩俊明  曹捷  李正宇 《物探与化探》2006,30(2):154-157,161

分析了中心回线装置激发的电磁场在晚期与平面电磁波的传播特征,通过时-频转换将TEM数据转换成平面波场数据,构建了关于反射函数的M×N阶欠定方程组。用线性规划法解出反射函数序列q_m,大量模型的反演结果与理论值误差很小。以q_m为参数绘制出电磁响应时间剖面图,从而实现了TEM快速成像解释。成像剖面清楚地反映了断面的地电特征。实测资料的处理结果说明了方法的实用性。  相似文献   

云南思茅—中甸地震剖面的地壳结构   总被引：7，自引：7，他引：7       下载免费PDF全文

张智  赵兵  张晰  刘财 《地球物理学报》2006,49(5):1377-1384

云南思茅—中甸宽角反射/折射地震剖面切割松潘—甘孜、扬子和华南三个构造单元的部分区域. 我们利用初至波和壳内反射波走时层析成像获得地壳纵波速度结构. 在获得新的地壳速度结构模型基础上，利用地震散射成像思想和低叠加次数的叠前深度偏移方法重建了研究区的地壳、上地幔反射结构. 综合分析研究区地壳P波速度模型和壳内地震反射剖面发现：沿测线从北至南地壳厚度从约50 km减薄至35 km左右，地壳厚度的减薄量主要体现在下地壳，剖面北段下地壳厚度约为30 km，剖面南段下地壳厚度仅为15 km左右；上地幔顶部局部位置P波速度值偏低，一般为76～78 km/s，反映出云南地区是典型的构造活动区的特点.剖面沿线地壳内地震反射发育，其中莫霍强反射出现在景云桥下方；在景云桥弧形断裂带8～10 km深处出现宽约50 km的强反射带.  相似文献   

地震层析成像技术在岩体完整性测试中的应用   总被引：3，自引：0，他引：3  

杜立志  张晓培  牛建军  汪雪格  冯国磊 《应用地球物理》2006,3(3):192-195

地震波层析成像借鉴了医学上X射线断面扫描的基本原理,利用地震波穿过地质体后走时及能量的改变等物理信息,通过数学处理重建地质体内部图像,从而得到所研究地质体的岩性及构造分布。本文利用这种方法,在一个钻孔中利用电火花震源激了弹性波,在另一个钻孔布设多个检波点同时接收,拾取弹性波初至时间,将接收到的数据利用SIRT方法进行反演迭代计算,最终形成一个弹性波速度谱图,然后利用岩土体的弹性波速度差异推断岩体完整性分布。与其它测试方法比较,该方法分辨率高,空间位置准确,在工程物探、岩土工程勘察中具有较好的应用前景。  相似文献   

Upper mantle convection beneath northwest China and its adjacent region driven by density anomaly     

许萍傅容珊  黄建平查显杰 戴志阳 《地震学报(英文版)》2006,19(5):552-562

Introduction The northwest of China includes Tarim, Junggar and Qaidam basins, and Kunlun, Tianshan, Altun and Qilian mountains, as well as the north part of the Tibetan Plateau. For a long time, the study of lithosphere structures and dynamics in this area has been a popular topic in geoscience, and has yielded many results. For example, TANG (1994) and LI et al (1998) suppose that the tectonic structure of Tarim Basin is various with geological periods, which changes many times betwee…  相似文献   

Estimating Crustal Heterogeneity from Double-difference Tomography     

Jean -Luc Got  Vadim Monteiller  Jean Virieux  Paul Okubo 《Pure and Applied Geophysics》2006,163(2-3):405-430

Seismic velocity parameters in limited, but heterogeneous volumes can be inferred using a double-difference tomographic algorithm, but to obtain meaningful results accuracy must be maintained at every step of the computation. MONTEILLER et al. (2005) have devised a double-difference tomographic algorithm that takes full advantage of the accuracy of cross-spectral time-delays of large correlated event sets. This algorithm performs an accurate computation of theoretical travel-time delays in heterogeneous media and applies a suitable inversion scheme based on optimization theory. When applied to Kilauea Volcano, in Hawaii, the double-difference tomography approach shows significant and coherent changes to the velocity model in the well-resolved volumes beneath the Kilauea caldera and the upper east rift. In this paper, we first compare the results obtained using MONTEILLER et al.'s algorithm with those obtained using the classic travel-time tomographic approach. Then, we evaluated the effect of using data series of different accuracies, such as handpicked arrival-time differences (``picking differences'), on the results produced by double-difference tomographic algorithms. We show that picking differences have a non-Gaussian probability density function (pdf). Using a hyperbolic secant pdf instead of a Gaussian pdf allows improvement of the double-difference tomographic result when using picking difference data. We completed our study by investigating the use of spatially discontinuous time-delay data.  相似文献