Sedimentology and kinematics of a large, retrogressive growth-fault system in Upper Carboniferous deltaic sediments, western Ireland   总被引：2，自引：0，他引：2  

P. B. Wignall  J. L. Best 《Sedimentology》2004,51(6):1343-1358

Growth faulting is a common feature of many deltaic environments and is vital in determining local sediment dispersal and accumulation, and hence in controlling the resultant sedimentary facies distribution and architecture. Growth faults occur on a range of scales, from a few centimetres to hundreds of metres, with the largest growth faults frequently being under‐represented in outcrops that are often smaller than the scale of feature under investigation. This paper presents data from the exceptionally large outcrops of the Cliffs of Moher, western Ireland, where a growth‐fault complex affects strata up to 60 m in thickness and extends laterally for ≈ 3 km. Study of this Namurian (Upper Carboniferous) growth‐fault system enables the relationship between growth faulting and sedimentation to be detailed and permits reconstruction of the kinematic history of faulting. Growth faulting was initiated with the onset of sandstone deposition on a succession of silty mudstones that overlie a thin, marine shale. The decollement horizon developed at the top of the marine shale contact for the first nine faults, by which time aggradation in the hangingwall exceeded 60 m in thickness. After this time, failure planes developed at higher stratigraphic levels and were associated with smaller scale faults. The fault complex shows a dominantly landward retrogressive movement, in which only one fault was largely active at any one time. There is no evidence of compressional features at the base of the growth faults, thus suggesting open‐ended slides, and the faults display both disintegrative and non‐disintegrative structure. Thin‐bedded, distal mouth bar facies dominate the hangingwall stratigraphy and, in the final stages of growth‐fault movement, erosion of the crests of rollover structures resulted in the highest strata being restricted to the proximity of the fault. These upper erosion surfaces on the fault scarp developed erosive chutes that were cut parallel to flow and are downlapped by the distal hangingwall strata of younger growth faults.  相似文献   

Physical interpretation of the breakdown process using a rate- and state-dependent friction law     

M. Cocco  A. Bizzarri  E. Tinti 《Tectonophysics》2004,378(3-4):241

  相似文献   

Evidence for Neotethys rooted within the Vardar suture zone from the Voras Massif, northernmost Greece   总被引：2，自引：0，他引：2  

Sally A. M. Brown  Alastair H. F. Robertson   《Tectonophysics》2004,381(1-4):143

Three conflicting models are currently proposed for the location and tectonic setting of the Eurasian continental margin and adjacent Tethys ocean in the Balkan region during Mesozoic–Early Tertiary time. Model 1 places the Eurasian margin within the Rhodope zone relatively close to the Moesian platform. A Tethyan oceanic basin was located to the south bordering a large “Serbo-Pelagonian” microcontinent. Model 2 correlates an integral “Serbo-Pelagonian” continental unit with the Eurasian margin and locates the Tethys further southwest. Model 3 envisages the Pelagonian zone and the Serbo-Macedonian zone as conjugate continental units separated by a Tethyan ocean that was sutured in Early Tertiary time to create the Vardar zone of northern Greece and former Yugoslavia. These published alternatives are tested in this paper based on a study of the tectono-stratigraphy of a completely exposed transect located in the Voras Mountains of northernmost Greece. The outcrop extends across the Vardar zone, from the Pelagonian zone in the west to the Serbo-Macedonian zone in the east.Within the Voras Massif, six east-dipping imbricate thrust sheets are recognised. Of these, Units 1–4 correlate with the regional Pelagonian zone in the west (and related Almopias sub-zone). By contrast, Units 5–6 show a contrasting tectono-stratigraphy and correlate with the Paikon Massif and the Serbo-Macedonian zone to the east. These units form a stack of thrust sheets, with Unit 1 at the base and Unit 6 at the top. Unstacking these thrust sheets places ophiolitic units between the Pelagonian zone and the Serbo-Macedonian zone, as in Model 3. Additional implications are, first, that the Paikon Massif cannot be seen as a window of Pelagonian basement, as in Model 1, and, secondly, Jurassic andesitic volcanics of the Paikon Massif locally preserve a gneissose continental basement, ruling out a recently suggested origin as an intra-oceanic arc.We envisage that the Almopias (Vardar) ocean rifted in Triassic time, followed by seafloor spreading. The Almopias ocean was consumed beneath the Serbo-Macedonian margin in Jurassic time, generating subduction-related arc volcanism in the Paikon Massif and related units. Ophiolites were emplaced onto the Pelagonian margin in the west and covered by Late Jurassic (pre-Kimmeridgian) conglomerates. Other ophiolitic rocks formed within the Vardar zone (Ano Garefi ophiolite, Unit 4) in latest Jurassic–Early Cretaceous time and were not deformed until Early Tertiary time. The Vardar zone finally sutured in the Early Tertiary creating the present imbricate thrust structure of the Voras Mountains.  相似文献   

Tectonic evolution of the Intra-Pontide suture zone in the Armutlu Peninsula, NW Turkey     

Alastair H. F. Robertson  Timur Ustamer 《Tectonophysics》2004,381(1-4):175

The Armutlu Peninsula and adjacent areas in NW Turkey play a critical role in tectonic reconstructions of the southern margin of Eurasia in NW Turkey. This region includes an inferred Intra-Pontide oceanic basin that rifted from Eurasia in Early Mesozoic time and closed by Late Cretaceous time. The Armutlu Peninsula is divisible into two metamorphic units. The first, the Armutlu Metamorphics, comprises a ?Precambrian high-grade metamorphic basement, unconformably overlain by a ?Palaeozoic low-grade, mixed siliciclastic/carbonate/volcanogenic succession, including bimodal volcanics of inferred extensional origin, with a possibly inherited subduction signature. The second unit, the low-grade znik Metamorphics, is interpreted as a Triassic rift infilled with terrigenous, calcareous and volcanogenic lithologies, including basalts of within-plate type. The Triassic rift was unconformably overlain by a subsiding Jurassic–Late Cretaceous (Cenomanian) passive margin including siliciclastic/carbonate turbidites, radiolarian cherts and manganese deposits. The margin later collapsed to form a flexural foredeep associated with the emplacement of ophiolitic rocks in Turonian time. Geochemical evidence from meta-basalt blocks within ophiolite-derived melange suggests a supra-subduction zone origin for the ophiolite. The above major tectonic units of the Armutlu Peninsula were sealed by a Maastrichtian unconformity. Comparative evidence comes from the separate Almacık Flake further east.Considering alternatives, it is concluded that a Mesozoic Intra-Pontide oceanic basin separated Eurasia from a Sakarya microcontinent, with a wider Northern Neotethys to the south. Lateral displacement of exotic terranes along the south-Eurasian continental margin probably also played a role, e.g. during Late Cretaceous suturing, in addition to overthrusting.  相似文献   

GIS Spatial-Temporal Modeling of Water Systems in Greater Toronto Area, Canada   总被引：2，自引：0，他引：2  

ChengQiuming ZhangGeorge LuCindy KoConnie 《中国地质大学学报(英文版)》2004,15(3):275-282

Modeling landscape with high-resolution digital elevation model (DEM) in a geographic information system can provide essential morphological and structural information for modeling surface processes such as geomorphologic process and water systems. This paper introduces several DEM-based spatial analysis processes applied to characterize spatial distribution and their interactions of ground and surface water systems in the Greater Toronto Area (GTA), Canada. The stream networks and drainage basin systems were derived from the DEM with 30 m resolution and the regularities of the surface stream and drainage patterns were modeled from a statistical/multifractal point of view. Together with the elevation and slope of topography, other attributes defmed from modeling the stream system, and drainage networks were used to associate geological, hydrological and topographical features to water flow in river systems and the spatial locations of artesian aquifers in the study area. Stream flow data derived from daily flow measurements recorded at river gauging stations for multi-year period were decomposed into “drainage-area dependent“ and “drainage-area independent“ flow components by two-step “frequency“ and “spatial“ analysis processes. The latter component was further demonstrated to relate most likely to the ground water discharge. An independent analysis was conducted to model the distribution of aquifers with information derived from the records of water wells. The focus was given on quantification of the likelihood of ground water discharge to river and ponds through flowing wells, springs and seepages. It has been shown that the Oak Ridges Moraine (ORM) is a unique glacial deposit that serves as a recharge layer and that the aquifers in the ORM underlain by Hilton Tills and later deposits exposed near the steep slope zone of the ridges of ORM provide significant discharge to the surface water systems (river flow and ponds) through flowing wells, springs and seepages. Various statistics (cross- and auto-correlation coefficients, fractal R/S exponent) were used in conjunction with GIS to demonstrate the influence of land types, topography and geometry of drainage basins on short- and long-term persistence of river flows as well as responding time to precipitation events. The current study has provided not only insight in understanding the interaction of water systems in the GTA, but also a base for further establishment of an on-line GIS system for predicting spatial-temporal changes of river flow and groundwater level in the GTA.  相似文献   

Modélisation morphodynamique cross-shore d'un estran vaseux     

Benoı̂t Waeles  Pierre Le Hir  Ricardo Silva Jacinto 《Comptes Rendus Geoscience》2004,336(11):1025-1033

Numerical experiments were performed to simulate the profile evolution of an intertidal mudflat with a 1D cross-shore morphodynamical model. First, the hydrodynamical forcing is a cross-shore tidal current due to semi-diurnal variations of the free surface elevation at the open boundary. Further, considering the conservation of the action density of surface gravity waves, a wave height (and resulting bottom shear stress) calculation is added to the morphodynamical model. Results of the numerical experiments show that the shape of the profile reaches equilibrium. The mudflat progrades continually when the forcing is tide only, whereas it can be steady under the simultaneous action of tide and waves. To cite this article: B. Waeles et al., C. R. Geoscience 336 (2004).  相似文献   

Effet de la teneur en eau d'un sol sur la réduction bactérienne d'oxydes de fer     

Sébastien J. Stemmler  Stéphanie Loyaux-Lawniczak  Jacques Berthelin 《Comptes Rendus Geoscience》2004,336(13):1171-1179

Iron-reducing activity of autochthonous bacteria from two temporary hydromorphic soils is evaluated by the study of iron reductive dissolution, as a function of water content. The release of ferrous iron in solution is coupled to the mineralization of soil organic carbon. Water soil saturation is not necessary for iron reductive dissolution, since the highest dissolution is obtained for a wet, but not water-saturated soil (100% of water holding capacity WHC), and dissolution is also very high in a soil at 75% WHC. To cite this article: S.J. Stemmler et al., C. R. Geoscience 336 (2004).  相似文献   

Caractéristiques et signification d'un niveau coquillier majeur à brachiopodes,marqueur événementiel dans l'évolution dévonienne de la Saoura (Sahara du Nord-Ouest,Algérie)     

Abdelkader Ouali Mehadji  Serge Elmi  Patrick Rachebœuf  Larbi Mekahli 《Comptes Rendus Geoscience》2004,336(14):1283-1292

In the Saoura, the brachiopod shell beds, so-called niveau coralligène, correspond to a major shell deposit dated to the Late Emsian. Brachiopods and crinoids dominate the benthic assemblage that contains also corals, bryozoans, trilobites, goniatites, and orthocones. This major level has a large geographic distribution and it is characterized by a wide brachiopod diversity due to time-averaging, taphonomic feedback and alternate bottom conditions changing from soft to shelly and firm. This kind of brachiopod association is linked to a transgressive onlap system. At regional extent, we can correlate this major shell bed to similar shell deposits from the Ahnet-Mouydir, Tindouf, and Zemmour areas. It indicates an important transgressive event underlined by change in the sedimentation from detritic deposits to carbonate sediments. To cite this article: A. Ouali Mehadji et al., C. R. Geoscience 336 (2004).  相似文献   

超轻型井点降水新技术的研究与应用          下载免费PDF全文

宁晋生  朱淑兰  武先岭  习胜强 《探矿工程》2004,31(2):6-8

分析了轻型井点降水设备的现状与不足，提出了超轻型井点降水新技术，即对现有轻型井点降水设备进一步轻化。介绍了轻化改进的措施，并通过工程检验，取得了良好效果。  相似文献   

管井降水技术在多种含水介质基坑工程中的应用          下载免费PDF全文

曹凤学  原波  杨冬  何世鸣 《探矿工程》2004,31(8):8-11

结合蚌埠城市中心广场会展中心工程，介绍了管井降水技术在多种含水介质的复杂地质环境下的应用。  相似文献