新疆库鲁克塔格青白口系北塞纳尔塔格组流纹岩的成因及其地质意义          下载免费PDF全文

吕彪  郭瑞清  王海培  金建斌  王明阳  魏震  努尔喀纳提 《地质科学》2016,(3):806-823

运用LA-ICP-MS锆石U-Pb测年获得库鲁塔格西山口地区北塞纳尔塔格组蚀变流纹岩的形成时代为841.0±1.4Ma（MSWD=0.42）, 蚀变流纹岩的发现指示塔里木北缘新元古代中期除发育大量的侵入岩外还存在火山活动。地球化学特征分析表明, 岩石富集Rb、 Ba、 K等大离子亲石元素和轻稀土元素, 明显亏损Nb、 Ta、 P、 Ti等高场强元素。此外岩石富集Sr、 强烈亏损Y和Yb, 高的Sr/Y（>40）和（La/Yb）_N（>40）比值的特征与埃达克岩类似。蚀变流纹岩Hf同位素值ε_Hf（t）=-29～-9, Hf的二阶段模式年龄T_DM²=3.43～2.24Ga, 结合岩石较低的Mg^#、 Eu正异常以及强烈亏损重稀土元素的特征表明,其可能源于加厚古老基性下地壳的部分熔融。此外蚀变流纹岩低的锆石饱和温度T_Zr=761℃～768℃,表明源区发生部分熔融时存在外来流体的加入。结合已有区域地质资料, 初步认为蚀变流纹岩形成与塔里木北缘新元古代早、 中期洋—陆俯冲碰撞作用有关。  相似文献   

History of faulting in the Northern Hastings Block,southern New England Orogen     

J. Yan  R. Offler 《Australian Journal of Earth Sciences》2016,63(7):821-841

Brittle failure is common in the Devonian to Permian rocks in the Northern Hastings Block (NHB) and is manifested by faults of different orientation and kinematic histories, but the timing of fault movement is not well defined. In this study, faults in the NHB were analysed with the map pattern of cross-cutting faults used to estimate the relative time of movement and relationship to other faults. We defined five episodes of faulting or fault reactivation that affected the NHB. The Yarras Fault System on the southwestern side of the NHB and the Parrabel Fault and related faults on the eastern side of the NHB are the two major fault systems responsible for transporting and rotating the NHB in the late Carboniferous. Faults on the eastern, northeastern and northern part of Parrabel Dome started and stopped moving after emplacement of the Hastings Block and before the intrusion of the Werrikimbe Triassic granitoids. We suggested that the movement on the major bounding faults is related to the accommodation of the NHB to the folding and cleavage development in the adjoining Nambucca Block, and is associated with the earliest part of the Hunter–Bowen Orogeny. Limited dextral movement on the extensions of the Taylors Arm Fault System caused minor displacements in the northeastern part of the NHB during the Late Triassic. Some small faults cut the Triassic granitoids or Triassic Lorne Basin sediments indicating tectonic activity continued post-Triassic.  相似文献   

Sedimentary facies analysis and depositional model of gravity-flow deposits of the Yanchang Formation,southwestern Ordos Basin,NW China     

F. Liu  Y. Li  M. Xue  J. Sun 《Australian Journal of Earth Sciences》2016,63(7):885-902

During the deposition of the Chang-7 (Ch-7) and Chang-6 (Ch-6) units in the Upper Triassic, gravity flows were developed widely in a deep lake in the southwestern Ordos Basin, China. Based on cores, outcrops, well-logs and well-testing data, this paper documents the sedimentary characteristics of the gravity-flow deposits and constructs a depositional model. Gravity-flow deposits in the study area comprise seven lithofacies types, which are categorised into four groups: slides and slumps, debris-flow-dominated lithofacies, turbidity-current-dominated lithofacies, and deep-water mudstone-dominated lithofacies. The seven lithofacies form two sedimentary entities: sub-lacustrine fan and the slump olistolith, made up of three and two lithofacies associations, respectively. Lithofacies association 1 is a channel–levee complex with fining-/thinning-upward sequences whose main part is characterised by sandy debris flow-dominated, thick-bedded massive sandstones. Lithofacies association 2 represents distributary channelised lobes of sub-lacustrine fans, which can be further subdivided into distributary channel, channel lateral margin and inter-channel. Lithofacies association 3 is marked by non-channelised lobes of sub-lacustrine fans, including sheet-like turbidites and deep-lake mudstones. Lithofacies association 4 is represented by proximal lobes of slump olistolith, consisting of slides and slumps. Lithofacies association 5 is marked by distal lobes of slump olistolith, comprising tongue-shaped debris flow lobes and turbidite lobes. It is characterised by sandy debris flow, muddy debris flow-dominated sandstone and sandstone with classic Bouma sequences. Several factors caused the generation of gravity flows in the Ordos Basin, including sediment supply, terrain slope and external triggers, such as volcanisms, earthquakes and seasonal floods. The sediment supply of sub-lacustrine fan was most likely from seasonal floods with a high net-to-gross and incised channels. Triggered by volcanisms and earthquakes, the slump olistolith is deposited by the slumping and secondary transport of unconsolidated sediments in the delta front or prodelta with a low net-to-gross and no incised channels.  相似文献   

以SRTM-DEM为控制的光学卫星遥感立体影像正射纠正   总被引：3，自引：1，他引：2  

张浩  张过  蒋永华  汪韬阳 《测绘学报》2016,45(3):326-331

针对全球测图缺少统一的控制基准的问题,提出了利用SRTM-DEM作为控制基准,对光学卫星遥感影像进行正射纠正的方法。首先,对光学卫星影像构建的立体影像对进行自由网平差并制作DEM;然后,以SRTM-DEM作为控制,将DEM作为单元模型,进行独立模型法DEM区域网平差,获得单元模型的定向参数;最后,改正立体影像的成像几何模型参数,进行正射纠正。选取湖北咸宁和江西某地两个测区的资源三号数据进行试验,试验结果表明,资源三号正视全色影像的平面定向精度由12.93像素提高到6.85像素。  相似文献   

城区地表形变差分TomoSAR监测方法     

王爱春  向茂生  汪丙南 《测绘学报》2016,45(12):1413-1422

压缩感知技术(CS)的差分TomoSAR技术解决了中高分辨率SAR数据在城区出现的叠掩问题,实现了城区地表形变信息的重构,但是该方法仅利用了目标的稀疏特性并没有考虑目标的结构特性,对具有这两种特性的目标进行重构时其性能较差。针对这一问题,本文采用联合Khatri-Rao子空间和块压缩感知(KRS-BCS),提出了一种差分SAR层析成像方法。该方法依据目标的结构特性和重构观测矩阵具有的Khatri-Rao积性质,将稀疏结构目标的差分TomoSAR问题转化为Khatri-Rao子空间下的BCS问题,然后对目标进行块稀疏的l1/l2范数最优化求解,最后通过理论分析和仿真试验对分辨能力和重构估计性能进行了定性和定量评价,仿真结果表明本文所采用的KRS-BCS方法不仅保持了高分辨率的优点,而且有效地降低了虚假目标出现的概率,大幅度提高了散射点准确重构概率,切实可行地解决了CS方法的不足。应用实例研究中,利用34景Envisat卫星ASAR时间序列影像对日本千叶县茂原市城区进行地表形变监测,并以一等水准点和实时测量的GPS站点观测数据作为参考形变结果进行验证,试验结果表明采用KRS-BCS方法反演的结果与参考形变结果保持了良好的一致性且形变速率整体偏差也较小,实现了较高精度的城区地表形变估计。  相似文献   

基于有理多项式模型的GF4卫星区域影像平差处理方法及精度验证     

皮英冬  杨博  李欣 《测绘学报》2016,45(12):1448-1454

分析了我国首颗静止轨道光学遥感卫星高分四号(GF4)特有的区域成像模式的几何特性,基于静止轨道成像基高比较小的几何特性提出一种利用平均高程面的区域网平差方法。该方法针对GF4卫星影像构建了基于有理多项式模型RFM的区域网平差模型,并在无控制条件下,对GF4卫星区域影像进行区域网平差处理,解决了GF4号区域影像由于定轨误差、定姿误差、大气折光以及镜头畸变等因素导致的拼接精度较低的问题。最后,通过两组真实数据试验对本文方法的精度及有效性进行了验证,同时分析了采用不同的误差补偿模型对于平差结果精度的影响。  相似文献   

一种天绘一号卫星影像精确定位方法     

周欣  王海岩  杨国鹏 《测绘科学》2016,41(11):5-9,129

针对如何最大程度地减小天绘一号卫星RPC模型系统误差,真实反映像方坐标与物方坐标关系的问题,该文介绍了天绘一号卫星的基本情况及相应的RPC参数模型,给出了求解RPC参数的基本方法和流程。结合天绘一号卫星采用等效框幅式光束法平差进行无控定位的特点,利用平差后计算得到的加密点坐标,提出了一种基于像点仿射变换的RPC模型区域网平差方法,并进行了RPC参数修正。经天绘一号卫星精度检测实验表明,修正后的RPC参数能有效地弥补系统性误差,具有更高的定位精度。  相似文献   

一种基于灰度块匹配的视野监测算法     

肖恭伟  欧吉坤  曹淑敏  高腾飞 《测绘科学》2016,41(12):43-46

针对视野移动方向的判断问题,该文介绍了运动补偿的常用方法及应用,提出了基于灰度块匹配的视野移动监测算法。通过对比各种算法计算复杂度和计算时间,发现灰度投影算法准确率低、计算量较小;块匹配搜索算法中的穷尽搜索算法准确率高,但是计算量较大。为了发挥以上两者算法的优势,将两者结合形成了灰度块匹配算法,并通过实验证实了灰度块匹配算法在实时监测系统中的可行性。  相似文献   

Present-day Block Movement and Fault Activity on the Eastern Margin of the Tibetan Plateau     

TANG Wenqing  ZHANG Yongshuang  ZHANG Qingzhi  ZHOU Hongfu  PAN Zhongxi  LI Jun  YANG Cheng 《《地质学报》英文版》2016,90(2):456-466

The geology and tectonics in the eastern margin of Tibetan Plateau are complex. The main tectonic framework is composed of blocks and faults. Using discontinuous global positioning system survey data for 2008–2014, the velocity field for the Eurasia reference framework was obtained. Based on the velocity field, the present-day velocities of the blocks and boundary faults were estimated. The results reveal that the movement rates of the Chuan-Qing, South China, Chuan-Dian and Indo-China blocks are(17.02±0.60) mm/a,(8.77±1.51) mm/a,(13.85±1.31) mm/a and(6.84 ± 0.74) mm/a, respectively, and their movement directions are 99.5°, 120.3°, 142.9° and 153.3°, respectively. All blocks exhibit clockwise rotation. The displacement rates of the Xianshuihe, Longmenshan, Anninghe, Zemuhe, Xiaojiang and Red River faults are(7.30±1.25–8.30±1.26) mm/a,(10.07±0.97–11.79±0.89) mm/a,(0.96±0.74–2.98±1.73) mm/a,(2.03±0.49–3.20±0.73) mm/a,(3.45±0.40–6.02±0.50) mm/a and(6.23±0.56) mm/a, respectively. The Xianshuihe, Anninghe, Zemuhe and Xiaojiang faults show leftlateral strike-slip movement, while the Longmenshan and Red River faults show right-lateral strikeslip. These characteristics of the blocks and faults are related to the particular tectonic location and dynamic mechanism.  相似文献   

Characteristics and Origin of Tight Oil Accumulations in the Upper Triassic Yanchang Formation of the Ordos Basin, North-Central China     

WU Songtao  ZOU Caineng  ZHU Rukai  YAO Jingli  TAO Shizhen  YANG Zhi  HAI Xiufen  CUI Jingwei  LIN Senhu 《《地质学报》英文版》2016,90(5):1821-1837

The Upper Triassic oil accumulations in the Ordos Basin is the most successful tight oil play in China,with average porosity values of less than 10% and permeability values below 1.0 mD.This study investigated the geological characteristics and origin of the tight oil accumulations in the Chang 6 member of the Upper Triassic Yanchang Formation in the Shanbei area based on over 50,000 petrological,source-rock analysis,well logging and production data.The tight oil accumulation of the Chang 6 member is distributed continuously in the basin slope and the centre of the basin.The oilwater relationships are complex.Laumontite dissolution pores are the most important storage spaces,constituting 30%-60% of total porosity and showing a strong positive relationship with oil production.The pore-throat diameter is less than 1 μm,and the calculated critical height of the oil column is much larger than the tight sand thickness,suggesting that the buoyancy was probably of limited importance for oil migration.The pressure difference between the source rocks and sandstone reservoirs is inferred to have provided driving force for hydrocarbon migration.Two factors of source-reservoir configuration and laumontite dissolution contributed to the formation of the Chang 6 tight oil accumulations.Intense hydrocarbon generation and continuous sand bodies close to the hydrocarbon kitchen are the foundation for the large-scale oil distribution.Dissolution of feldspar-laumontite during the process of organic matter evolution generated abundant secondary pores and improved the reservoir quality.  相似文献