风积沙环境下高等级公路冻土块石路基降温性能分析     

韩风雷  张学富  喻文兵  韦良文  周杰 《冰川冻土》2018,40(3):528-538

青藏高原脆弱的生态系统以及人类工程活动,加剧了青藏工程走廊线性工程两侧沙漠化、荒漠化发展趋势,尤其冻土块石路基面临日益严重的风积沙灾害问题。以多年冻土区高等级公路块石路基为研究对象,采用数值模拟分析风积沙环境下封闭块石路基的降温性能和长期热稳定性。结果表明：风积沙堆积对封闭块石路基下部土层冻土温度的影响程度高于冻土上限,1.0 m湿沙工况降低冻土温度,0.2 m干沙则增大冻土温度。升温背景下,随年平均气温增加风沙堆积对路基冻土上限影响程度增强,干沙增大冻土融化深度,湿沙抬升冻土上限。随冻土含冰量减小,路基中心冻土上限对气候升温敏感性增加,风沙堆积影响减弱。气候升温和风沙堆积条件下,在年平均气温低于-5.5℃时,宽幅沥青路面封闭块石路基能够满足降温要求,使人为冻土上限保持在块石层内。研究成果可为风沙危害区多年冻土块石路基的病害治理和拟建青藏高速公路块石路基设计提供科学依据。  相似文献   

风成砂沉积和古气候研究   总被引：1，自引：0，他引：1       下载免费PDF全文

王凤之  陈留勤 《沉积与特提斯地质》2018,38(1):71-81

作为一类常见的陆相沉积岩类型,风成砂岩产出于太古代到新生代的岩石记录中。风成砂沉积的形成与古气候、古环境密切相关,因而地质历史中的风成砂沉积是研究古气候和古地理环境的重要窗口。本文回顾了国内外风成砂沉积的研究进展,着重讨论了气候因素控制下风成砂沉积的成因及其形成过程。当前,国际研究注重风成沙丘形成过程的推理和模拟以及风成砂的沉积成岩过程,在风成沙丘形成过程、计算模拟、沉积保存的四维时空模型、风成相等方面取得了许多新认识。鉴于国际研究动态,国内需要在地层记录中鉴别和剖析风成砂的宏观和微观形态特征基础上,加强风成砂沉积动力学过程研究,增强对风成砂沉积(微)环境的理解和认识。  相似文献   

六种成膜封堵剂的室内实验优选与评价          下载免费PDF全文

王建伟 《探矿工程》2021,48(3):73-77

为更好地服务深部钻探工程,准确了解冲洗液封堵性能,对6种成膜封堵剂开展了砂床实验、API静失水量实验、流变性能实验及抗温实验等室内实验进行优选与评价。实验结果表明,2号和4号成膜封堵剂在6种成膜封堵剂中封堵性能最好,它们在基浆中的最优加量均为2%,100 ℃温度条件下加入这2种封堵剂的冲洗液具有较好的抗温性能;冲洗液中膨润土含量和处理剂是影响冲洗液封堵性能的2个重要因素：膨润土含量越高,冲洗液封堵性能越好,加入聚合物、降滤失剂等处理剂可以提高冲洗液的封堵性能。砂床实验是评价冲洗液封堵性能好坏的重要依据。  相似文献   

粗砂砾石地层中高压旋喷桩隔水帷幕施工技术          下载免费PDF全文

张红涛 《探矿工程》2021,48(6):113-117

太原万达广场A2区商住楼基坑工程部分区域为粗砂砾石地层,基坑隔水帷幕中深层搅拌桩无法有效使用。提出了在粗砂砾石地层采用高压旋喷桩隔水帷幕的施工技术方案,采用双套管锚杆钻机引孔、单管高压喷射工艺进行施工,成功实施了这一工程。经检查,喷射注浆体相互咬合良好,有效桩径内水泥含量均匀无夹块现象,隔水帷幕止水效果良好。  相似文献   

确定砂土动剪切模量和阻尼比的方法对比     

宋东松  冯震  金红山  孙逸涵 《吉林大学学报(地球科学版)》2021,51(5):1366-1380

确定土体动剪切模量的常用方法有规范法、Kumar法和自相关函数法,确定相应阻尼比的方法有规范法、Das and Luo法、Kokusho法、Kumar法和互相关函数法,为了分析不同方法所产生差异,实现定量化对比分析,笔者以福建标准砂（粒径为0.5~1.0 mm）为研究对象,采用不排水的应力控制动三轴试验,探讨不同的确定土体动剪切模量和阻尼比方法的差异性,并给出了不同土体条件建议选用的方法。结果表明：1）3种方法确定动剪切模量的结果有一定的差异,随剪应变的增大结果的差异逐渐增大,有效围压对结果的差异性有所影响,当剪应变为4×10^-3,有效围压为100 kPa时,3种方法差异显著,相对误差最大接近20%;2）而5种方法确定阻尼比的结果差异显著,随着剪应变的增大,5种方法确定的阻尼比相对误差大体上均在迅速减小,只有规范法在有效围压为100 kPa时,其相对误差有较小的增大趋势;5种方法中,Kumar法确定的阻尼比最接近平均阻尼比,互相关函数法远高于平均阻尼比,Das and Luo法和Kokusho法确定的阻尼比基本一致但低于平均阻尼比。建议以后的工程应用中,加载方式为应力控制时,可采用自相关函数法确定动剪切模量,采用Kumar法确定阻尼比,二者确定的动剪切模量和阻尼比均最接近平均值。  相似文献   

辽河西部凹陷曙北地区沙四段薄砂层成因类型及分布规律     

宋兵  王波  刘兴周  刘少治  陈希光  卢文忠 《地质与资源》2021,30(6):698-706

为了明确辽河西部凹陷曙北地区沙河街组四段薄砂层成因类型及分布规律,从岩心、测井响应和地震反射特征等方面总结了各类成因薄砂层的识别标志,并预测了各砂层组的砂体展布,探讨了砂体发育的控制因素,总结了沉积模式.研究结果表明,曙北地区沙四段为扇三角洲-湖泊的沉积体系,薄砂层发育水下分流河道、河口坝、低隆滩坝、沿岸浅滩4种成因类型,其中以水下分流河道和低隆滩坝为主.古地貌、古物源和古水深控制了各类砂体的展布.以曙光和兴隆台古潜山一线为界,南部为扇三角洲体系沉积区,主要发育前缘水下分流河道和河口坝;北部（包括低隆区）为无明显水流注入的半封闭湖湾区,主要发育低隆滩坝砂体和灰/云坪,在西侧沿岸局部地区还发育沿岸浅滩.储量区外大面积发育的低隆滩坝砂体,是下一步碎屑岩增储上产的潜在接替区域.  相似文献   

Selection of sand models and identification of parameters using an enhanced genetic algorithm          下载免费PDF全文

Yin‐Fu Jin  Zhen‐Yu Yin  Shui‐Long Shen  Pierre‐Yves Hicher 《国际地质力学数值与分析法杂志》2016,40(8):1219-1240

Numerous constitutive models of granular soils have been developed during the last few decades. As a consequence, how to select an appropriate model with the necessary features based on conventional tests and with an easy way of identifying parameters for geotechnical applications has become a major issue. This paper aims to discuss the selection of sand models and parameters identification by using genetic algorithm. A real‐coded genetic algorithm is enhanced for the optimization with high efficiency. Models with gradually varying features (elastic‐perfectly plastic modelling, nonlinear stress–strain hardening, critical state concept and two‐surface concept) are selected from numerous sand models as examples for optimization. Conventional triaxial tests on Hostun sand are selected as the objectives in the optimization. Four key points are then discussed in turn: (i) which features are necessary to be accounted for in constitutive modelling of sand; (ii) which type of tests (drained and/or undrained) should be selected for an optimal identification of parameters; (iii) what is the minimum number of tests that should be selected for parameter identification; and (iv) what is the suitable and least strain level of objective tests to obtain reliable and reasonable parameters. Finally, a useful guide, based on all comparisons, is provided at the end of the discussion. Copyright © 2015 John Wiley & Sons, Ltd.  相似文献   

Direct observation of complex Tóthian groundwater flow systems in the laboratory     

Xing Liang  Yu Liu  Menggui Jin  Xingchen Lu  Renquan Zhang 《水文研究》2010,24(24):3568-3573

Based on the theory of gravity‐driven groundwater flow systems, we have developed a complex Flow System Sand‐Box Model (FSM). It enables the visual observations of the development and characteristics and temporal evolution of complex Tóthian flow systems in the laboratory. The configuration of the regional, intermediate and local flow systems can be controlled and observed; hydraulic head, flow direction and travel time can be measured; and the scale and shape of the sub‐flow systems as well as the path lines and flow lines can be observed directly. The experiments demonstrate the Tóthian flow systems in a small basin with multiple sources and sinks. Greater local topographic (water table) undulation will lead to larger local flow systems. Greater regional and less local topographic undulation will enhance the development of intermediate and regional flow systems. In homogeneous media, increasing fluid‐potential differences between source and sink increase the spatial scale of the generated flow systems. The FSM is a useful teaching aid and experimental device to study and develop an intuitive insight into gravity‐driven groundwater flow systems. It helps to visualize and understand the hydraulic properties and controlling factors of Tóthian flow systems and may be used to study problems related to the chemical and temperature characteristics of the flow systems as well. Copyright © 2010 John Wiley & Sons, Ltd.  相似文献   

珠江磨刀门水道咸潮上溯加剧的原因   总被引：1，自引：0，他引：1  

韩志远  田向平  刘峰 《海洋学研究》2010,28(2):52-59

对磨刀门水道不同年份地形资料和多年枯季潮位资料进行了对比分析,结果表明:大规模的河床采砂,引起磨刀门上游河段河床大幅下切,河道深泓平均加深0.59~2.25 m,河槽容积平均增加8.91×106~12.11×106m3,使该河段枯季潮差增大,进潮量增加,潮汐动力增强,导致咸水界向上游河段推移;口门围垦整治后,磨刀门口门区由众多岛屿环抱而成的内海区变成人工导堤控制的"一主一支"两条水道,水域面积减少了80%,河槽容积减少了40%,深槽趋于顺直加深,使口门区的"调淡"作用消失,这是咸潮上溯的重要原因;根据多年水文频率分析,发生严重咸潮灾害时,西、北江枯季流量并非都是枯水流量,因此枯季上游来水量变化并不是近年来咸潮灾害加剧的主要原因。  相似文献   

Characterizing the hydraulic properties of unsaturated sand considering various porosities and drying‐wetting paths of the retention curve     

Kai‐yuan Ke  Yih‐Chi Tan  Chu‐Hui Chen  Hsien‐Tsung Lin 《水文研究》2013,27(4):592-604

Previous studies have shown that water retention curve (WRC) and the hydraulic conductivity vary because of changes of the void ratio or porosity of soil. However, limited documents pointed out the change of hydraulic properties of soil when compacted to different porosities while considering both of the drying and wetting processes of the WRC. This information is sometimes necessary for research like finger flow analysis or the occurrence of wetting and drying cycles as what would be seen in the field. Therefore, this study aims to examine the change of WRC characteristics with varied porosity considering both of the drying and wetting path in WRC by conducting a sand box experiment. Results show that the same type of sand compacted to various porosities have different hydraulic parameters. Hydraulic conductivities generally decrease with reduced porosities; shape parameter α of the van Genuchten equation (1980) linearly decreases with declining porosity and shape parameter n in a reversal manner for the sands of interest whether in the drying process or wetting process. The unsaturated properties of sand are further characterized by inspecting the variations of moisture content, matric suction and vertical displacement of soil body subject to periodic changes of the water level by another sand box experiment. The outcomes suggest that the saturated water content and residual water content are changing during the wetting–drying process, which can be an implication of the changed properties of WRC. The characteristics of volumetric deformation might be varied as well because of the observation of the dissimilar patterns of the changing vertical displacements among each wetting–drying process. Infiltration patterns of the sands also are identified through numerical modelling by introducing a constant infiltration flux from the surface followed by a no‐influx condition. Results indicate that less water accumulates in the sand near the surface for the sand compacted to higher porosity, but water can move deeper. Hydraulic conductivity is found as the prime factor dominating the evolvement of wetting fronts. However, shape parameters of water retention curves also affect the infiltration pattern to some extent. In addition, different sands with similar porosities can have quite different infiltrating characteristics. Copyright © 2012 John Wiley & Sons, Ltd.  相似文献