空腔结构复合填充墙-钢框架抗侧力性能试验研究   总被引：4，自引：0，他引：4  

管克俭  李捍无  彭少民 《世界地震工程》2003,19(3):73-77

通过空腔结构复合填充墙-钢框架和同尺寸纯钢框架的对比试验，分析了空腔结构复合填充墙-钢框架的抗侧力性能和滞回性能。研究结果证明空腔结构复合填充墙是一种理想的抗侧力体系，可用于多层或小高层钢结构住宅，作为结构的抗侧力构件。  相似文献   

Steel frames with bracing mechanism and hysteretic dampers     

M. C. Phocas  A. Pocanschi 《地震工程与结构动力学》2003,32(5):811-825

A new earthquake resistant structural system for multi‐storey frame structures, based on a dual function of its bracing components, is developed. This consists of a hysteretic damper device and a cross‐bracing mechanism with a kinetic closed circuit, working only in tension, so that cable members can be used for this purpose. Solutions are presented regarding the connections' design of three types of structural frame system, that are concerned throughout the study: braced moment free frame, braced moment resisting frame with moment free supports, and with moment resisting supports. The dynamic behaviour of the system is investigated on the basis of an SDOF model, and based on the response spectra method an approximate design approach of the controlled structures is shown. From the time history analysis of the structural systems for the El Centro earthquake the areas of appropriate stiffness relations of the frames to the hysteretic dampers and the cable braces are deduced, so that the energy dissipation of the system may be controlled by the damper‐cable bracing mechanism. Based on the results of these studies, a predesign approach is developed for the implementation of the control system in frame structures. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Seismic response predictions of multi‐span steel bridges through pushover analysis     

Yi Zheng  Tsutomu Usami  Hanbin Ge 《地震工程与结构动力学》2003,32(8):1259-1274

In the new trend of seismic design methodology, the static pushover analysis is recommended for simple or regular structures whilst the time‐history analysis is recommended for complex structures. To this end, the applicable range of the pushover analysis has to be clarified. This study aims at investigating the applicability of pushover analysis to multi‐span continuous bridge systems with thin‐walled steel piers. The focus is concentrated on the response demand predictions in longitudinal or transverse directions. The pushover analysis procedure for such structures is firstly summarized and then parametric studies are carried out on bridges with different types of superstructure‐pier bearing connections. The considered parameters, such as piers' stiffness distribution and pier–0.5ptdeck stiffness ratio, are varied to cover both regular and irregular structures. Finally, the relation of the applicability of pushover analysis to different structural formats is demonstrated and a criterion based on the higher modal contribution is proposed to quantitatively specify the applicable range. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings     

Nicolas Luco  Yasuhiro Mori  Yosuke Funahashi  C. Allin Cornell  Masayoshi Nakashima 《地震工程与结构动力学》2003,32(14):2267-2288

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

三角钢标对GPS测量影响的试验分析     

曾云  张予杰 《全球定位系统》2003,28(4):24-28

GPS测量控制网为了与地面国家控制网进行联合的平差，必须与国家坐标系进行联测，GPS接收机有时也必须安置在有三角钢标的旧有控制点上。通过对此分析研究了三角钢标对GPS测量的影响，对设计和实施GPS测量的用户具有一定的参考价值。  相似文献   

钢结构住宅体系墙板及墙板节点足尺模型振动台试验研究   总被引：5，自引：3，他引：5  

李国强  赵欣  孙飞飞  高文利  杨尊权  靳世文 《地震工程与工程振动》2003,23(1):64-70

本文对山东安尔发建筑科技有限公司开发的钢结构住宅体系的墙板及墙板节点足尺模型进行了模拟地震振动台试验研究，分析了该体系的自振特性、地震反应特征和破坏现象，特别对外墙板及内墙的节点的抗震性能进行了深入研究，得出了有益的结论，为钢结构住宅体系的进一步推广提供了试验依据。  相似文献   

往复荷载作用下矩形钢管混凝土压弯构件承载力计算     

杨有福  韩林海 《地震工程与工程振动》2003,23(5):125-129

本文基于往复荷载作用下矩形钢管混凝土压弯构件的实验结果，比较了国内外比较典型的设计规范(程)，包括英国BS5400(1979)、美国ACI318—99(1999)和AISC-LRFD(1999)、日本AIJ(1997)、欧洲EC4(1994)、中国GJB4142-2000(2001)和福建省地方标准(送审稿)，及本文数值方法在计算往复荷载作用下矩形钢管混凝土压弯构件承载力的差异。结果表明，在进行往复荷载作用下矩形钢管混凝土压弯构件承载力计算时，各种计算方法获得的承载力都偏于安全，其中，数值计算结果与实验结果最接近，GJB4142—2000(2001)的计算结果与实验结果吻合程度稍差，ACI318—99(1999)，EC4(1994)和福建省地方标准(送审稿)的计算结果比实验结果约低20％，而BS5400(1979)、AISC—LRFD(1999)和AIJ(1997)的计算结果比实验结果总体上低30％以上。本文结果可供进行矩形钢管混凝土结构设计时参考。  相似文献   

钢支撑性能对高层钢结构动力反应的影响   总被引：1，自引：0，他引：1  

邓雪松  张耀春 《地震工程与工程振动》1997,17(3):52-59

钢框架－支撑结构体系是高层钢结构常用的结构体系。支撑的性能对高导钢框架－支撑体系的动力性能影响较大，其中支撑的工细比是关键的影响因素。文中通过大量的计算分析研究支撑长细比对高层钢框架－支撑体系弹塑性地震反应的影响，所得结论可供工程设计时参考。  相似文献   

金州短水准观测和资料分析中的若干重要问题     

卢良玉  葛彦增 《东北地震研究》1997,13(2):1-6

对金州短水准观测和资料分析中常易引起争议或新出现的若干重要问题进行论论，其结果对跨断层形变测量具有普遍意义。  相似文献   

45Mn_2钻杆接头热处理工艺研究          下载免费PDF全文

刘可忠 《探矿工程》1996,(6):11-13

探讨了４５Ｍｎ２钻杆接头的各种热处理工艺降综合机械性能，应用断裂力学优选最佳热处理工艺，并已投入生产。  相似文献