A rational method for development of limit state for liquefaction evaluation based on shear wave velocity measurements     

C. Hsein Juang  Caroline J. Chen 《国际地质力学数值与分析法杂志》2000,24(1):1-27

This papers presents a new approach for developing a limit state for liquefaction evaluation based on field performance data. As an example to illustrate the new approach, a database that consists of, among many other features, in situ shear wave velocity measurements and field observations of liquefaction/non‐liquefaction in historic earthquakes is analysed. This database is first used to train a neural network to classify liquefaction/non‐liquefaction based on soil resistance parameters and load parameters. The successfully trained and tested neural network is then used to establish a limit state, a multiple dimension boundary that separates ‘zone’ of liquefaction from ‘zone’ of non‐liquefaction. The limit state yields cyclic resistance ratio for a given set of soil resistance parameters. Examination of all cases in the database show that the developed limit state has a high degree of accuracy in predicting the occurrence of liquefaction/non‐liquefaction. The developed neural network model can accurately predict the cyclic resistance ratio of soils. Copyright © 2000 John Wiley & Sons, Ltd.  相似文献   

The challenges of the landing obligation in EU fisheries     

《Marine Policy》2017

A feasibility study was conducted on the impacts of the new Common Fisheries Policy (CFP) rules requiring catches in regulated fisheries to be landed and counted against quotas of each Member State - the landing obligation (LO), and that catch of species subject to the LO below a minimum conservation reference size (MCRS) be restricted to purposes other than direct human consumption. The aim was to estimate the level of discarded fish likely to be covered by the new rules, the impact of the rules on EU fisheries and the regulatory challenges and responses to them. Data from EU's Scientific, Technical and Economic Committee on Fisheries (STECF) database were analysed to estimate the volume of unwanted catches produced by EU fisheries. Views were sought from policy officials and fisheries scientists through a questionnaire on the implications of the LO and the control of fisheries across Member States, and the potential adjustments that might be needed. Findings show that 11% (44,000 t) of the total catches of EU countries from which data were available are of fish under MCRS. The species with the highest volume of undersized discards associated with the lowest quota, which would potentially restrict the fishing opportunities for other quota species (i.e. choke species), are plaice and haddock with 18,000 and 14,000 t of undersized fish respectively, followed by whiting and cod with 5000 and 6000 t of undersized fish respectively. Discards data shows that the Netherlands, United Kingdom, France and Belgium will be most affected by landings for non-human markets. Findings also show that existing infrastructure at landing ports in all Member States is limited because there are currently limited facilities in place to handle animal by-products produced by the catching sector. Policy officials maintained that while they could support the fishing industry through funding programmes, it is the responsibility of fishers to ensure they have the right infrastructure to handle unwanted catches. The expectation is that the LO combined with the restriction to non-human consumption purposes will encourage fishers to internalise the costs of catching unwanted fish and motivate them to avoid unwanted catch. This will be realised if sufficient flexibility is given to fishers to find their own solutions to reducing unwanted catches. It is concluded that gear technology measures exist to enable the regulated fisheries to increase gear selectivity.  相似文献   

基于Remez迭代算法求解差分系数的双相介质自适应有限差分正演模拟          下载免费PDF全文

王文化  文晓涛  张波  张懿疆  王威 《地球物理学报》2020,63(6):2400-2414

利用传统有限差分方法对基于Biot理论的双相介质波动方程进行数值求解时,由于慢纵波的存在,数值频散效应较为明显,影响模拟精度.相对于声学近似方程及普通弹性波方程,Biot双相介质波动方程在同等数值求解算法和精度要求条件下,其地震波场正演模拟需要更多的计算时间.本文针对Biot一阶速度-应力方程组发展了一种变阶数优化有限差分数值模拟方法,旨在同时提高其正演模拟的精度和效率.首先结合交错网格差分格式推导Biot方程的数值频散关系式.然后基于Remez迭代算法求取一阶空间偏导数的优化差分系数,并用于Biot方程的交错网格有限差分数值模拟.在此基础上把三类波的平均频散误差参数限制在给定的频散误差阈值和频率范围内,此时优化有限差分算子的长度就能自适应非均匀双相介质模型中的不同速度区间.数值频散曲线分析表明:基于Remez迭代算法的优化有限差分方法相较传统泰勒级数展开方法在大波数范围对频散误差的压制效果更明显;可变阶数的优化有限差分方法能取得与固定阶数优化有限差分方法相近的模拟精度.在均匀介质和河道模型的数值模拟实验中将本文变阶数优化有限差分算法与传统泰勒展开算法、最小二乘优化算法进行比较,进一步证明其在复杂地下介质中的有效性和适用性.  相似文献   

基于大涡模拟与被动示踪物模型的人工鱼礁数值研究   总被引：1，自引：0，他引：1  

王者也  李爽 《海洋与湖沼》2021,52(6):1376-1387

投放人工鱼礁是解决海洋生态环境问题的重要措施之一。通过使用并行大涡模拟模式（the parallelizeda large-eddy simulation model,PALM）及被动示踪物模型模块,研究了不同流速条件（0.1,0.2,0.4和0.6 m/s）下方型人工鱼礁对流场形态、营养盐的抬升作用、和湍流动能收支的影响。研究表明,鱼礁的存在使得其附近垂向速度增大,产生上升流。受到上升流的抬升作用,鱼礁底部的示踪物迅速进入海洋上层,之后遇到鱼礁后方的背涡流,示踪物的抬升受阻,高度逐渐降低。在上升流区域以及背涡流区域的共同影响下,示踪物抬升区域的最大高度与来流流速无关。不同上升流定义对应的上升流区域的高度与来流流速均不相关;上升流区域的最大速度、平均速度与来流流速都成线性增加的关系;然而随着来流流速的增大,不同上升流定义对应的上升流区域面积的变化趋势却完全不同。投放鱼礁后,鱼礁区域底部的混合增强,区域底部的能量被输运至上层。这说明,鱼礁的存在不仅对营养物质具有抬升作用,还能将能量向上输运。  相似文献   

长江三峡库区秭归杨林桥镇震群成因     

董建辉  叶浩  徐玉聪  刘华清 《地震地磁观测与研究》2017,38(6):34-40

对三峡数字地震台网记录的2016年3—6月三峡工程库区秭归库段杨林桥镇小震群进行双差精定位,通过Snoke方法计算该震群中较大地震的震源机制解,并结合野外宏观调查等方法,分析震源参数的时空变化特征。结果表明:杨林桥镇小震群密集分布在2 km×3 km矩形范围内,有较明显的展布方向,但与邻近的仙女山断裂、九畹溪断裂和天阳坪断裂走向不一致;震群距长江干流超过10 km,与三峡水库无水利联系,无相关性;震群展布方向上有岩溶洞分布,且降雨丰富,初步判断成因类型为岩溶塌陷型。  相似文献   

STA/LTA—AIC算法对地震P波震相拾取稳定性影响   总被引：1，自引：1，他引：0  

郭铁龙  张雪梅  邹立晔 《地震地磁观测与研究》2017,38(3):13-17

选取区域地震台网记录的地震波形数据,使用STA/LTA算法与STA/LTA—AIC算法,进行地震P波震相初至到时自动拾取,对地方震及震中距较大的震相进行P波震相拾取效果分析,发现:STA/LTA算法对于地方震P波震相识别精度较高,与STA/LTA—AIC算法拾取的P波震相初至到时相差不大;震中距变大后,STA/LTA算法对P波拾取位置相对于最佳位置向后延迟,STA/LTA—AIC算法有效矫正了STA/LTA算法拾取位置的延迟问题,与人工拾取位置差别可忽略不计。  相似文献   

吉林松原5.8级震群震相特征     

卢燕红  张洪艳  刘轶男  陈聪  陈闯  蔡宏雷 《地震地磁观测与研究》2017,39(1):67-72

选取2013年松原5.8级震群23个M_S≥3.0地震事件,通过地震波的振动持续时间、速度、周期、振幅等,进行震相识别,综合分析发现：该区域土层较厚,且震源相对较浅,面波较发育,波列的振动持续时间较长;地震震相主要以Pn、Sn、Pg、Sg、PmP、SmS为主：其中PmP、SmS震相在震中距70—110 km范围内较易识别;Pn、Sn震相在震中距150 km以上可较清晰的识别,随着震中距增大,Sn震相在震中距350 km以上将不易识别。  相似文献   

单晶高温合金X射线衍射斑点自动识别算法研究     

张哲  朱锦霞  庄凯  谢光  秦秀波  魏存峰 《CT理论与应用研究》2017,26(4):447-455

单晶高温合金展现出优越的抗疲劳性能和高温蠕变性能,广泛应用于航空发动机和燃气轮机的热端部件。但是,其制备过程中会产生晶体取向偏离、杂晶等缺陷。目前国际上已经普遍使用X射线劳埃衍射技术对单晶叶片的晶体缺陷进行无损检测,但是这种检测方法主要依赖人工识别,效率低,结果可重复性差,不适合批量化检测。本文结合工程需要,提出对劳埃衍射斑点进行自动识别的算法,主要包括衍射图样的预处理、轮廓检测、轮廓形态筛选及轮廓符合检测等。该算法能够自动检测出衍射图样上的衍射斑点,并最终给出斑点的位置坐标数据及其误差。根据衍射斑点的位置,通过衍射分析算法,计算出单晶叶片上的晶体取向,并最终对叶片的晶体缺陷给出综合评价。   相似文献   

2016年1月9日河北怀来M_L3.4震群发震构造分析     

单连君  张新东  王晓山 《震灾防御技术》2017,12(3):557-564

本文采用模板识别匹配滤波方法检测2016年1月9日河北怀来M_L3.4震群序列目录中遗漏的地震事件,并加入波形互相关信息对震相到时进行校正,采用盖革法进行精确定位。重新定位后震群震中呈NEE向分布,与怀涿次级盆地北缘断裂走向一致,并主要集中在该断裂的小水峪-黄土窑段。震群中最大地震M_L3.4的P波初动解的一个节面走向与精定位后震中展布和断裂的走向基本一致,可推测怀涿次级盆地北缘断裂可能为怀来M_L3.4震群的发震构造。震中集中分布的怀涿次级盆地北缘断裂的小水峪-黄土窑段属5个分段中滑动速率最大的段落,分析认为该震群可能是由断层慢滑动引起的。  相似文献   

Crustal velocity structure of central Gansu Province from regional seismic waveform inversion using firework algorithm          下载免费PDF全文

Yanyang Chen  Yanbin Wang  Yuansheng Zhang 《地震科学（英文版）》2017,30(2):81-89

The firework algorithm (FWA) is a novel swarm intelligence-based method recently proposed for the optimization of multi-parameter, nonlinear functions. Numerical waveform inversion experiments using a synthetic model show that the FWA performs well in both solution quality and efficiency. We apply the FWA in this study to crustal velocity structure inversion using regional seismic waveform data of central Gansu on the northeastern margin of the Qinghai-Tibet plateau. Seismograms recorded from the moment magnitude (M _W) 5.4 Minxian earthquake enable obtaining an average crustal velocity model for this region. We initially carried out a series of FWA robustness tests in regional waveform inversion at the same earthquake and station positions across the study region, inverting two velocity structure models, with and without a low-velocity crustal layer; the accuracy of our average inversion results and their standard deviations reveal the advantages of the FWA for the inversion of regional seismic waveforms. We applied the FWA across our study area using three component waveform data recorded by nine broadband permanent seismic stations with epicentral distances ranging between 146 and 437 km. These inversion results show that the average thickness of the crust in this region is 46.75 km, while thicknesses of the sedimentary layer, and the upper, middle, and lower crust are 3.15, 15.69, 13.08, and 14.83 km, respectively. Results also show that the P-wave velocities of these layers and the upper mantle are 4.47, 6.07, 6.12, 6.87, and 8.18 km/s, respectively.  相似文献