2013年南斯科舍海岭M_W7.8地震的多点震源机制反演          下载免费PDF全文

张喆  许力生 《地球物理学报》2020,63(8):2978-2998

2013年11月17日,在南极南奥克尼群岛北、南极板块与斯科舍板块之间发生了一次M_W7.8级地震（2013年南斯科舍海岭M_W7.8地震）,我们利用全球分布的长周期和宽频带地震记录反演确定了这次地震随时间和空间变化的震源机制,验证了提出的一种多点震源机制反演的新方法.首先利用长周期记录的W震相反演了这次地震的矩心矩张量解并利用体波提取了视震源时间函数,同时利用台阵反投影技术从宽频带记录中获得了这次地震的高频源的时空分布,然后基于矩心矩张量解、视震源时间函数以及高频源的时空分布,实现了采用新方法对2013年南斯科舍海岭M_W7.8地震的多点震源机制反演.矩心矩张量解表明,地震矩心在44.50°W/60.18°S,矩心深度19 km,半持续时间49 s,释放标量地震矩4.71×10²⁰ N·m,发震断层走向104°,倾角54°,滑动角8°.视震源时间函数清楚地揭示了地震矩随时间变化的方位依赖性,总体上可以将时间过程分为前60 s和后50 s两个阶段,但前60 s可细分为两次子事件.根据台阵反投影结果,这次地震为沿海沟从西到东的单侧破裂,破裂长度达311 km,可以分为5次子事件,能量释放的峰值点依次为13 s、30 s、51 s、64 s和84 s,平均破裂速度分别为0.6 km·s^-1、2.6 km·s^-1、2.3 km·s^-1、2.8 km·s^-1和3 km·s^-1.多点震源机制反演显示,5次子事件的矩震级分别为M_W7.57,M_W7.48,M_W6.80,M_W7.53和M_W7.08,半持续时间依次为21 s,17 s,6 s,16 s和8 s,走向分别为95°,105°,81°,98°和98°,倾角依次为57°,49°,86°,46°和64°,滑动角-9°,1°,-17°,13°和-4°.这些在震源机制、能量释放以及持续时间方面的变化都是当地构造和应力环境复杂性的反映.  相似文献   

新疆北天山中东段呼图壁地区震源深度的重新测定   总被引：2，自引：1，他引：1  

李艳永  唐明帅  乌尼尔 《震灾防御技术》2019,14(2):352-362

联合Hyposat法、PTD法和gCAP矩张量反演法,重新测定新疆北天山中东段呼图壁地区2010—2017年502个地震的震源深度,并对震源深度剖面进行初步分析。结果表明,重新测定的震源深度优势分布为15—20km,平均震源深度为16km,呼图壁M_S 6.2地震的震源深度为20km;研究区南部和中部的震源深度集中分布在20km左右,与北天山壳内低速体的层位相当,可能是上地壳和下地壳之间的韧性剪切带存在的部位,起到滑脱层的作用,研究区北部的震源深度则向浅部扩展;呼图壁M_S 6.2地震的发震断裂可能在清水河子断裂下方的1条隐伏反冲断层上,可能是霍尔果斯断裂向前沿断坡冲断受阻而在相反方向上发育分支反冲断层的结果。  相似文献   

STUDY ON RELATIONSHIP BETWEEN THE ACTIVITY OF MIYALUO FAULT AND WENCHUAN EARTHQUAKE SEQUENCE     

LI Zhen-yue  WAN Yong-ge  SHENG Shu-zhong 《地震地质》2019,41(1):72-83

Under the background of thrusting stress regime, a large number of strike-slip earthquakes occurred on the Miyaluo Fault during the Wenchuan earthquake sequence process, which is in the southern part of the Longmenshan Fault. In order to find the cause of their occurrence, stress tensors in subregions near the Miyaluo Fault are estimated. The result shows that in both north and south side of the Miyaluo Fault, the direction of principal compressive stress is nearly perpendicular to the Longmenshan Fault, and its dip is nearly horizontal, and the direction of tensile stress is nearly vertical. While in the Miyaluo fault zone, the direction of principal compressive stress is SWW-NEE, and its dip is nearly horizontal, the direction of principal tensile stress is NNW-SSE, also its dip is nearly horizontal. It is consistent with sinistral shear stress state in the Miyaluo fault zone. It was referred that the behavior of Miyaluo Fault during the Wenchuan earthquake sequence process was caused by tearing effect generated from unbalanced forces of two sides of the fault. To understand the rupture mode of the aftershocks in subregions as described above, the total seismic moment tensors are estimated by adding the corresponding component separately of the seismic moment tensor of aftershocks in each region. The result shows the similar trend of total seismic moment tensor components in the north and south side of the Miyaluo Fault(indicating the consistency of rupture mode in the north and south side of the Miyaluo Fault), and most seismic moment tensor components in the south side is higher than that in the north side, especially the compression component perpendicular to Longmenshan Fault and expansion component in the vertical direction. It indicates that thrusting component in the southeast direction in the south side is greater than that in the north side, and the thrusting difference causes the sinistral tearing effect of the Miyaluo Fault. We also find that the sinistral tearing component of the Miyaluo Fault is the same order of magnitude with the thrusting difference of its two sides, which indicates that the tearing effect of Miyaluo Fault can be completely explained by thrusting difference of its two sides. According to the analysis, we put forward the dynamic model of the Miyaluo Fault, which can explain the above phenomenon.  相似文献   

考虑力组合效应的钢框架端板连接力学行为     

梁刚  郭宏超  刘云贺  杨迪雄 《地震工程与工程振动》2019,39(1):96-105

为研究不同力组合效应对平齐端板连接力学行为的影响,采用ABAQUS程序建立不同受力情况下连接的非线性简化有限元模型,通过与国内外典型试验结果对比分析,验证了有限元模型的可靠性。基于此通过考虑8种力组合因素的影响,分析了2种不同钢等级的梁柱节点力学行为,进一步讨论了EC3 Part 1-8规范的适用性。结果表明:简化有限元模型在弯矩-转角曲线、破坏形态、初始刚度和塑性抗力等方面与试验结果吻合良好。框架梁轴力对节点的力学行为影响显著,当轴拉力为20%的框架梁轴向塑性抗力N_pl时,高强钢节点的刚度和强度分别降低68%和52%;当轴压力为-20%N_pl时,刚度和强度分别增加89%和42%。此外节点的滞回耗能能力、破坏模式以及分类属性与梁轴力水平密切相关。对于高强钢梁柱平齐端板节点,EC3规范对框架梁轴压力的限值仍过于保守。研究结果对于提高结构的抗倒塌能力和组合力作用下的理论研究具有重要参考价值。  相似文献   

Full moment tensor inversion constrained by double-couple focal mechanism for induced seismicity*          下载免费PDF全文

Yuyang Tan  Haijiang Zhang  Junlun Li  Chen Yin  Furong Wu 《地震科学（英文版）》2020,33(4):177-193

In this study, we propose a new method to determine full moment tensor solution for induced seismicity. This method generalizes the full waveform matching algorithm we have developed to determine the double-couple (DC) focal mechanism based on the neighbourhood algorithm. One major difference between the new method and the former one is that we adopt a new misfit function to constrain the candidate moment tensor solutions with respect to a reference DC solution in addition to other misfit terms characterizing the waveform matching. Through synthetic tests using a real passive seismic survey geometry, the results show the new constraint can help better recover the DC components of inverted moment tensors. We further investigate how errors in the velocity model and source location affect the moment tensor solution. The synthetic test results indicate that the constrained inversion is robust in recovering both the DC and non-DC components. We also test the proposed method on several real induced events in an oil/gas field in Oman using the same observation system as synthetic tests. While it is found that the full moment tensor solutions without using the DC constraints have much larger non-DC components than solutions with the DC constraints, both solutions are able to fit the observed waveforms at similar levels. The synthetic and real test results suggest the proposed DC constrained inversion method can reliably retrieve full moment tensor solutions for the induced seismicity.  相似文献   

新型抗水氯氧镁水泥防渗渠在自然环境的水化产物、相转变规律及其对强度的影响          下载免费PDF全文

石天阳  余红发  麻海燕  李颖 《盐湖研究》2021,29(3):38-46, 55

氯氧镁水泥(Magnesium oxychloride cement, MOC)具有快凝、早强、高强、防火和不腐蚀玻璃纤维等优点,非常适合于制作玻璃纤维增强薄壁制品,在农业灌溉工程中具有良好的应用前景。采用XRD和TOPAS分析了新型抗水氯氧镁水泥制成内蒙古防渗渠的物相组成,探讨了氯氧镁水泥制品在自然环境的水化产物与相转变规律、以及相组成对强度的影响。结果表明,在水分缺少的条件下,氯氧镁水泥的水化产物主要为5Mg(OH)_2·MgCl_2·8H_2O(5·1·8)和Mg(OH)_2;在水分充足的条件下,水化产物主要为Mg(OH)_2和5·1·8,碳化产物为碳化氯氧化镁Mg(OH)_2·MgCl_2·2MgCO_3·6H_2O(1·1·2·6)和水菱镁矿4MgCO_3·Mg(OH)_2·4H_2O(4·1·4)。水化产物对强度有促进作用,而碳化产物会降低强度。通过10年的工程环境考验,证明新型氯氧镁水泥制品在环境中能够保持主要强度相5·1·8的稳定性,具有良好的长期力学性能。  相似文献   

HY-1A卫星COCTS数据条带消除的两种定量化方法比较   总被引：1，自引：1，他引：1  

牛生丽  唐军武  蒋兴伟  郭茂华  宋庆君 《遥感学报》2007,11(6):860-867

HY-1A卫星是中国第一颗海洋遥感卫星,水色水温扫描仪(COCTS)是其主要探测器。由于各探测单元的信号响应特性不同,导致COCTS数据含有大量条带噪声。这严重影响了图像的质量和可视性,对资料的定量化应用也是十分不利的。为了解决这个问题,本研究采用矩匹配及直方图匹配法,对COCTS数据进行条带消除。结果表明,两种方法都是有效的,能够在消除条带的同时保持数据原有的物理意义,并避免细节特征的丢失。但是从整体效果看,直方图匹配法更好一些。本研究的结果同样适用于其他以并扫方式获取数据的遥感器的条带消除。  相似文献   

考虑基桩嵌岩段侧阻的岩溶区顶板安全厚度计算     

赵明华  朱志仁  黄明华  杨超炜  徐卓君 《岩土力学》2018,39(11):4201-4209

为考虑岩溶区基桩嵌岩段侧阻力的影响,提出了一组确定岩溶区桩端顶板安全厚度的计算方法。考虑顶板的整体承载效应,结合弹性力学及第一强度理论,得到了顶板抗弯安全厚度计算式;考虑嵌岩段桩侧摩阻力对桩顶荷载的分担作用,结合格里菲斯判据及摩尔判据,获得了顶板抗冲切和剪切的安全厚度计算公式,进而运用ABAQUS建立了岩溶顶板与基桩整体分析计算模型,有限元计算结果与理论计算值吻合良好。结合工程实例重点分析了顶板厚跨比对抗弯安全厚度的影响,顶板岩层厚度对抗冲切、剪切安全厚度的影响以及嵌岩段侧摩阻力系数?对顶板安全厚度计算的影响。  相似文献   

J-lay铺管作业力学分析     

刘大辉  阮伟东  白勇 《海洋工程》2017,35(1):51-59

目前J-lay铺管法作为深水和超深水铺管的最适用方法广泛应用于深海油气开发。考虑J-lay铺管时管道几何非线性特征以及触地区边界效应,将J-lay铺管模型划分三构件进行力学分析:悬浮段、边界层段以及触地段。建立Orca Flex模型和引入Wang改进二构件模型,通过对比上述三种方法计算J-lay相应构型、轴力、弯矩和剪力分布,验证该三构件模型的可行性和考虑边界效应的必要性。基于Lamé公式计算管道横截面处轴向、径向以及环向应力,对比分析J-lay铺设管道应力分布特征。结果表明:该改进三构件模型能真实有效地模拟J-lay铺管过程中管道受力情况,特别是触地点附近弯矩和剪力变化情况,能为管道疲劳损伤分析提供理论基础。  相似文献   

Evaluation of pullout load capacity of suction caissons in sand using a three-dimensional displacement approach     

Hiroyoshi Hirai 《Marine Georesources & Geotechnology》2017,35(8):1121-1134

An investigation was conducted to obtain analytical solutions for the pullout behavior of a suction caisson undergoing inclined loads in sand. The inclined load is transformed into an equivalent load system in which the vertical, horizontal, and moment loads are applied on the center of the lid of the suction caisson. The vertical and lateral stiffness coefficients along the skirt of the suction caisson in sands are presented using the new three-dimensional elastic solutions taking into account the nonhomogeneous and nonlinear properties of the sand. The vertical, lateral, and rocking stiffness coefficients on the base of the suction caisson are presented considering the solutions of a hollow rigid cylindrical punch acting on the surface of a soil. The yield, pullout, and failure for sands with the nonhomogeneous and nonlinear characteristics are taken into consideration. The effects of the load inclination, the loading depth, and the aspect ratio on the pullout load capacity of the suction caisson are presented. Behaviour of the suction caisson in sand prior to failure is clarified from the relationship between tensile load, displacement, and rotation and that between depth, vertical pressure, and lateral pressure.  相似文献