跨孔条件下椭球模型的视电阻率异常特征     

沙磊  蔡柏林 《煤田地质与勘探》1997,25(2):45-49

在跨孔条件下，利用积分方程法计算了孔区内外不同位置、不同产状的三维椭球体模型视电阻率异常。根据所得的典型数值模拟结果，借助视电阻率异常信息剖面图，对异常进行研究，总结了异常特征及其变化规律，并以此为基础分析和认识了其他模型的异常特征。  相似文献   

Influence of gas production induced volumetric strain on permeability of coal   总被引：10，自引：0，他引：10  

Satya Harpalani  Guoliang Chen 《Geotechnical and Geological Engineering》1997,15(4):303-325

Summary The gas permeability of a coalbed, unlike that of conventional gas reservoirs, is influenced during gas production not only by the simultaneous changes in effective stress and gas slippage, but also by the volumetric strain of the coal matrix that is associated with gas desorption. A technique for conducting laboratory experiments to separate these effects and estimate their individual contribution is presented in this paper. The results show that for a pressure decrease from 6.2 to 0.7 MPa, the total permeability of the coal sample increased by more than 17 times. A factor of 12 is due to the volumetric strain effect, and a factor of 5 due to the gas slippage effect. Changes in permeability and porosity with gas depletion were also estimated using the measured volumetric strain and the matchstick reservoir model geometry for flow of gas in coalbeds. The resulting variations were compared with results obtained experimentally. Furthermore, the results show that when gas pressure is above 1.7 MPa, the effect of volumetric strain due to matrix shrinkage dominates. As gas pressure falls below 1.7 MPa, both the gas slippage and matrix shrinkage effects play important roles in influencing the permeability. Finally, the change in permeability associated with matrix shrinkage was found to be linearly proportional to the volumetric strain. Since volumetric strain is linearly proportional to the amount of gas desorbed, the change in permeability is a linear function of the amount of desorbing gas.  相似文献   

Developments of borehole strain observa- tion outside China     

邱泽华  石耀霖 《地震学报(英文版)》2004,17(Z1)

Introduction The Earth′s crust deforms in the regional tectonic stress field. Borehole strain observation isone important means for studies on the crustal deformation and the stress field. QIU and ZHANG(2002) have introduced the current situation of borehole strain observation in China. OutsideChina, early in September of 1968, Sacks of Carnegie Institution of Washington and Evertson ofUniversity of Texas firstly invented a borehole dilatometer in the world (Sacks, Evertson, 197…  相似文献   

Near-surface seismic anisotropy, attenuation and dispersion in the aftershock region of the 1999 Chi-Chi earthquake   总被引：1，自引：0，他引：1  

Yunfeng Liu  Ta-Liang Teng  Yehuda Ben-Zion 《Geophysical Journal International》2005,160(2):695-706

  相似文献   

气压对巴伦台钻孔倾斜的影响特征及机制研究     

许璐  邢喜民 《大地测量与地球动力学》2018,38(8):873-876

以巴伦台钻孔倾斜及分量应变辅助观测气压数据为研究对象，运用相关及小波分析研究气压对巴伦台钻孔倾斜的影响特征。结果表明，气压对巴伦台钻孔倾斜影响表现为准线性关系，对NS向的影响大于EW向。气压对NS向影响的显著频段有2 048～8 192、32 768～65 536 min，对EW向影响的显著频段为2 048～8 192 min。探讨了气压对巴伦台钻孔倾斜的影响机制。  相似文献   

Cracking risk of partially saturated porous media—Part I: Microporoelasticity model     

Bernhard Pichler  Luc Dormieux 《国际地质力学数值与分析法杂志》2010,34(2):135-157

Drying of deformable porous media results in their shrinkage, and it may cause cracking provided that shrinkage deformations are hindered by kinematic constraints. This is the motivation to develop a thermodynamics‐based microporoelasticity model for the assessment of cracking risk in partially saturated porous geomaterials. The study refers to 3D representative volume elements of porous media, including a two‐scale double‐porosity material with a pore network comprising (at the mesoscale) 3D mesocracks in the form of oblate spheroids, and (at the microscale) spherical micropores of different sizes. Surface tensions prevailing in all interfaces between solid, liquid, and gaseous matters are taken into account. To establish a thermodynamics‐based crack propagation criterion for a two‐scale double‐porosity material, the potential energy of the solid is derived, accounting—in particular—for mesocrack geometry changes (main original contribution) and for effective micropore pressures, which depend (due to surface tensions) on the pore radius. Differentiating the potential energy with respect to crack density parameter yields the thermodynamical driving force for crack propagation, which is shown to be governed by an effective macrostrain. It is found that drying‐related stresses in partially saturated mesocracks reduce the cracking risk. The drying‐related effective underpressures in spherical micropores, in turn, result in a tensile eigenstress of the matrix in which the mesocracks are embedded. This way, micropores increase the mesocracking risk. Model application to the assessment of cracking risk during drying of argillite is the topic of the companion paper (Part II). Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

Borehole failure analysis in a sandstone under anisotropic stresses     

Euripides Papamichos 《国际地质力学数值与分析法杂志》2010,34(6):581-603

Borehole failure under anisotropic stresses in a sandstone is analyze numerically for various borehole sizes using a nonlinear elastic–plastic constitutive model for a Cosserat continuum. Borehole failure is identified as macroscopic failure of the borehole through the development of shear bands and breakouts. The results compare well both qualitatively and quantitatively with experimental results from polyaxial tests on Red Wildmoor sandstone. They show that the hole size effect of the borehole failure strength is independent of the far‐field stress anisotropy and follows a ? power law of the hole size. A similar scale effect equation with a ? power law is proposed for the scale effect of the maximum plastic shear strain at failure. This equation can be useful for better predicting hole‐size‐dependent failure with standard codes based on classical continua. The effect of stress anisotropy on the borehole failure stress is found to be independent of the hole size. The failure stress decreases linearly to 40% as the stress anisotropy increases. However, the maximum plastic shear strain at failure is stress anisotropy independent and therefore the critical plastic shear strain for failure is only hole‐size dependent. Copyright © 2009 John Wiley & Sons, Ltd.  相似文献   

松辽盆地大陆科钻二开段大井眼钻井液技术     

郑文龙 《地质与勘探》2016,52(5):931-936

CCSD-SK2井是一口钻穿松辽盆地白垩纪陆相沉积地层的中国大陆科学钻探井。二开段先以216mm口径钻至2806.20m,然后进行444.5mm口径扩孔。泥页岩地层大井眼钻进过程中粘土矿物含量高且易造浆,砂砾岩层渗透性强易粘卡,井壁稳定控制与钻屑携带难度大。选用了钾铵聚合物钻井液体系和聚磺钻井液体系,通过正交实验确定了钻井液配方。将钻井液控制在合适的密度、较低的失水量以及较强的封堵性,有效实现了井壁稳定;保持适当的环空返速、较高的动塑比以及定期打稠塞举砂等措施,有效实现了井眼净化。1086.45m~1147.56m与1182.74m~1256.01m井段累计收获岩心130.90m,取心率达到97.41%,平均机械钻速为0.84m/h;最终顺利钻至2806.20m。  相似文献   

降水井改造为原位生产井的工艺设计及应用     

吕士东  孙友宏  李强  郭威  周科  王思远 《世界地质》2016,35(4):1185-1194

为有效地扩大油页岩原位开采区域和节约油页岩原位开采的成本,需将废置的降水井改造成为原位生产井。根据降水井与原位生产井井身结构的相似性,对农安油页岩原位开采先导试验工程基地的降水井改造工艺进行了设计和优化。同时研发了偏心轮式套管割管装置及三爪式套管打捞装置用于拔管施工。工程实践证明,该工艺具有步骤简单、合理、高效以及价格低廉等特点。偏心轮式套管割管装置及三爪式套管打捞装置应用在降水井改造中,均取得理想的效果。  相似文献   

甘肃武威盆地页岩气“武页1井”成膜低固相冲洗液的应用          下载免费PDF全文

单文军  段晓青  任福建  张伟华  岳伟民  李艳宁 《探矿工程》2016,43(7):111-115

“武页1井”是甘肃省地质调查院实施的一口页岩气基础地质条件调查井,主要目的是为了查明页岩层段的分布。地层岩性主要为泥岩、砂岩、页岩、碳质板岩、灰岩。浅层倾角大、胶结性差、破碎、井壁强度低。现场采用成膜低固相冲洗液体系,解决了地层破碎、坍塌掉块和水敏性钻探施工难题,体系具有护壁性、抑制性和胶结性。使用中取得了较好的效果,保证了该项目的顺利施工。  相似文献