锑矿石化学物相分析方法选择性分离条件验证及准确度评估   总被引：1，自引：1，他引：0  

熊英  董亚妮  裴若会  崔长征  李映琴  杨艳芳  谢光晋 《岩矿测试》2017,36(2):156-162

目前我国矿石化学物相分析方法,除少数方法具有较广泛的适应性外,多数方法均是针对某一具体矿区的样品而制定,在实际应用中无法确认分析结果的准确性和选择性分离流程的适应范围。验证化学物相分析方法的选择性分离流程及方法准确度是该领域必须解决的问题。本文以我国具有代表性的锑矿类型——单锑硫化矿为研究对象,通过岩矿鉴定确定锑的主要矿物相,从试验样品中挑选验证选择分离条件所需的单矿物,在无法获得锑华单矿物的情况下,通过价态分析确定了锑华与锑酸盐混合物中锑华的比例,并通过系列单矿物选择分离对比条件试验和X射线衍射分析,确定了锑华、辉锑矿和锑酸盐等锑物相的选择性分离条件。结果表明:对于硫化锑含量大于35%的样品,锑硫化相的选择浸出时间从传统的30 min调整为40 min,硫化锑的浸出率提高了4%~6%,硫化锑相对于锑酸盐的串相率降低了45%~70%,硫化锑相浸出完全,提高了硫化锑和黄锑矿相分析的准确度。该方法适用于不同地区、不同类型(氧化矿、硫化矿)锑矿石样品的锑化学物相分析。  相似文献   

Effects of scour-hole dimensions and soil stress history on the behavior of laterally loaded piles in soft clay under scour conditions     

《Computers and Geotechnics》2017

Bridge pile foundations in the midst of water current are often subjected to scour, which induces the loss of soil support around the piles and thus results in a significant decrease of foundation capacities or even the failure of bridges. In the current practice, when the scour-affected behavior of the pile foundations is analyzed, either the whole scour-hole geometry or the possible changes in the stress history of the remaining soils is often ignored. In reality, however, scouring creates scour holes with certain dimensions around the pile foundations and the remaining soils that are not scoured away undergo an unloading process at the same time, which will increase the over-consolidation ratios of the remaining soils and accordingly changes of their mechanical properties. This paper examines the behavior of laterally loaded piles in soft clay under scour conditions by using the p-y method. The conventional p-y curves have been modified appropriately to reasonably reflect the effects of three-dimensional scour-hole geometry as well as the stress history of the soils, with the aid of integration of Mindlin’s fundamental solutions. A field test is used to serve as a reference case and to investigate the effects of stress history, scour depth, scour width, and scour-hole slope angle on the responses of laterally loaded piles in soft clay. The results indicate that neglecting the stress history effect can be unconservative for scour-affected pile foundations in soft clay, whereas neglect of the scour-hole dimensions and geometry would lead to over-conservative predictions/design of the laterally loaded piles under scour condition.  相似文献   

Influence of the intermediate principal stress and principal stress direction on the mechanical behavior of cohesionless soils using the discrete element method     

《Computers and Geotechnics》2017

In this paper, the Discrete Element Method (DEM) is employed to numerically explore the response of hollow cylinder specimens of granular soils under complex stress paths. Two series of numerical tests are conducted to clarify the effects of the principal stress direction α and the intermediate principal stress through the b-value on the mechanical response of granular materials. The effects of α and b-value on the non-coaxiality of the principal stress and the principal plastic strain increment directions are investigated. It is observed that b-value and α significantly affect the non-coaxial behavior of granular materials. Finally, the results are discussed and compared with those obtained from physical laboratory tests.  相似文献   

Cone penetration test in sand: A numerical-analytical approach     

《Computers and Geotechnics》2017

Separation of the effects of initial horizontal stress and relative density on cone tip resistance in sandy soils has been a complicated issue for many years. In order to overcome this problem, a numerical modeling of CPT which has been verified by calibration chamber tests, has been used in this paper to achieve a reliable analytical solution. The analytical solution has resulted in two relationships for sleeve friction and cone tip resistance in terms of the initial conditions of sandy soil. Based on the presented solution, the initial horizontal stress and relative density can be determined according to CPT measurements.  相似文献   

Buckling failures of reserved thin pillars under the combined action of in-plane and lateral hydrostatic compressive forces     

《Computers and Geotechnics》2017

The reasons that pillars with small width-to-height ratios fail remain unclear. This study established a mechanical model for the buckling failure of a thin pillar subjected to compressive forces to investigate the stability of reserved thin pillars (RTPs) on both sides of mining units during barrier pillar recovery. The critical buckling stress of the thin pillar was obtained using the energy variational method, and its relationship to the aspect ratio (length-to-width ratio) was investigated. The buckling instability of RTPs can be determined by comparing the RTP stress obtained from numerical simulations with the buckling stress derived from the mechanical model.  相似文献   

Numerical investigation of the opening effect on the mechanical behaviours in rocks under uniaxial loading using hybrid continuum-discrete element method     

《Computers and Geotechnics》2017

Openings including their size, shape and distribution in rock play a significant role in the performance of rock related structures. The well-established knowledge in this area can contribute to the engineering practices, for example, underground space design, planning and optimisation in Civil and Mining Engineering and wellbore stability in Drilling Engineering, among others. Thus, understanding the failure mechanism of rock with openings is theoretically and practically meaningful. Laboratory testing on rock or rock-like materials with openings have been studied extensively in the literature, which, however, primarily focuses on the cracks/fractures. In this paper, a comprehensive numerical study on the effect of non-banded openings, i.e., circular, rectangular, and triangular opening, on the rock mechanical behaviour is performed using a hybrid continuum-discrete element method. It is revealed that the proposed simulation method can reproduce reasonably the crack initiation and propagation, and predict well the change of the mechanical behaviour due to the openings. In addition, the influence of the opening shape and opening ratio (=area of opening/specimen area) on the mechanical behaviour is also investigated.  相似文献   

A comprehensive study on the parameters setting in smoothed particle hydrodynamics (SPH) method applied to hydrodynamics problems     

《Computers and Geotechnics》2017

Smoothed particle hydrodynamics (SPH) is a meshfree, Lagrangian particle method which has advantages in handling solids with extremely large deformation. Like any other numerical methods, cares must be taken to ensure its desirable accuracy and stability through considering several correction techniques in calculation. The selection of values for parameters in those correction approaches is a key step in SPH simulation, which is always difficult for new beginners to deal well with effectively. This paper examines the common inconsistency and instability problems in SPH method and studies its computational efficiency when applied to hydrodynamics problems with material strength like soil column collapse. We analyzed in detail how the correction techniques mitigate these inconsistency and instability problems. Also, the numerical testing results associate with different values for the parameters used in the correction techniques are provided for better understanding the influence of these parameters and for finding out the desirable values. It is found that (1) the SPH method is easily subjected to an inconsistency problem in the boundary area due to the boundary deficiency, and it can be treated well by adopting “virtual particles” contributing to the particle summations. (2) The numerical oscillation in SPH simulation can be mitigated effectively by artificial viscosity with the suggested parameter values. (3) The tension cracking treatment, artificial viscosity and artificial stress work well in removing the tensile instability problem in SPH method. In addition, the nearest neighboring particle searching (NNPS) algorithm, spacing ratio, smoothing length and time step influence the efficiency and accuracy of SPH method significantly. It is shown that SPH method with suggested parameters values can produce a very good result compared with the experimental result.  相似文献   

A simple method to describe three-dimensional anisotropic failure of soils     

《Computers and Geotechnics》2017

In order to describe the anisotropic failure of soils caused by the internal fabric, isotropic failure criterion should be generalized to be anisotropic. This paper achieves the generalization by introducing a simple method, called anisotropic transformed stress method, which apparently differs from the common way. Physical interpretation of this method are analyzed further. Using this method, many existing isotropic criteria can become anisotropic in the same way, and will be expressed by a unified formula finally. To verify this method, anisotropic Unified Strength Criterion is used to predict the peak strength of anisotropic soils in different loading conditions.  相似文献   

南羌塘盆地中-新生代逆冲推覆构造样式及构造应力场特征          下载免费PDF全文

李正友薛灵文王世锋王 刚彭成名侯  芸段磊 《地质科学》2017,(3):783-800

新生代印度板块与欧亚板块的持续碰撞挤压,造成南羌塘地块向南逆冲于拉萨地块之上,并在南羌塘地块内部形成了一系列的由北往南的逆冲推覆构造。然而,到目前为止,我们对这些逆冲推覆构造及夹持其间的褶皱变形的结构组成、构造样式、形成时代以及缩短量分布等问题仍存在很大的争议。本文在详细的野外调查基础上,对赛布错-扎加藏布断裂（SZT）,多玛-其香错断裂（DQT）,隆鄂尼褶断带（LF）及南羌塘与中央隆起带分界的肖查卡-双湖断裂（XST）进行了几何学、运动学分析,建立了精细的构造框架。我们认为这些断裂为始新世以来形成的同时期的叠瓦状逆冲推覆;并通过野外褶皱形态,结合层面、节理面、断层面滑动矢量的分析,识别出南羌塘盆地4期构造应力场：1） 代表中特提斯俯冲碰撞阶段的近S-N 向的挤压;2） 中特提斯碰撞后,随着班公湖-怒江缝合带的形成,南羌塘地区构造应力场转为S-N 向的伸展;3） 新生代印度板块向欧亚板块俯冲碰撞,青藏高原进入陆内变形阶段,南羌塘盆地内表现为NE-SW 向的挤压,形成本文提及的一系列逆冲推覆构造;4） 随着高原的持续隆升,约14 Ma南北向裂谷开始活动,应力场转为NWW-SEE 向伸展,形成双湖裂谷系。  相似文献   

博格达山地区二叠纪以来构造应力场解析及地质意义   总被引：1，自引：0，他引：1  

关宝文  郑建京  赵恒  郭建明  杨燕  王亚东  郑有伟 《大地构造与成矿学》2017,41(1):42-49

博格达山是现代地质学研究的一个热点,但是大部分研究都集中在博格达何时隆升,对于其构造应力场的研究较少。作者通过对博格达山地区不同时代地层中岩墙、节理、褶皱和断层等构造进行分期配套以及构造要素测量分析,认为二叠纪以来博格达山及周缘地区具有较强构造变形,构造应力场可划分为3期:二叠纪末期最大主压应力方向为北西西向,可能与后碰撞伸展作用和乌拉尔碰撞带向东挤压的远程效应有关;侏罗纪末-早白垩世最大主压应力为近南北向,与欧亚板块和拉萨地块的碰撞有关;新近纪以来由于印度板块与欧亚板块相互碰撞的远程效应,博格达山地区最大主应力方向为NNE-NE向。这些结果表明,博格达山具有多期次的构造运动,主要受欧亚板块南缘不同时期小陆块碰撞的控制,并且这些构造应力场对周缘盆地油气成藏具有一定影响。  相似文献