A study on quality of aquatic environment in Tumen River Area     

Zhu Yanming  Li Jinsong  Lu Xueqiang 《中国地理科学(英文版)》1997,8(2):126-135

After the survey of pollution sources, a study on surface water quality assessment and forecast is given by means of grey system method, fuzzy mathematical method and multiple-index method. Based on it, aquatic environment quality features, treatment measures and environmental strategies of the area are proposed. The quality of aquatic environment of 5 rivers in the Tumen River area is studied. The results show that the pollution of surface water is serious; water quality of most rivers is between grade IV and V except the Hunchun River, being higher than grade IV standard; pollution levels of most rivers have been basically controlled except the of Burhatong River, which is deteriorating gradually. Pollutants of the rivers are comparatively regular, mainly are SS, COD, BOD, AR-OH, NH₃-N. The main pollution trades are chemical fibre industry, pulp and paper making industry and mining industry. If the growth rate of gross industrial product is higher than 25 percent under the encouraging-model of regional exploitation, the pollutants’ load will overtake the bearing capacity of aquatic environment. Thus some protection program against pollution must be worked out in order to achieve the harmonious development of economy society and environment. A project from “Studies on Earlier Stage of Regional Development” of the Chinese Academy of Sciences  相似文献   

NaCl胁迫下杂交稻农艺性状配合力及遗传力分析     

方良俊 《广东海洋大学学报》2006,26(3):91-94

采用4×4不完全双列杂交设计,在NaCl胁迫下对杂交水稻主要农艺性状进行了配合力和遗传力分析.结果表明,在调查的10个性状中有4个性状受NaCl胁迫影响差异较大,母本的千粒重及父本的粒厚一般配力差异显著,杂交组合的株高、粒厚、结实率及千粒重特殊配合力差异极显著,其中杂交组合N28S×中花14具有较高的配合力,受NaCl胁迫影响较低。株高及千粒重的广义遗传力和狭义遗传力均较高,可作为杂交水稻耐盐性的选育依据。  相似文献   

Finite element formulation and algorithms for unsaturated soils. Part II: Verification and application     

Daichao Sheng  David W. Smith  Scott W. Sloan  Antonio Gens 《国际地质力学数值与分析法杂志》2003,27(9):767-790

The finite‐element formulation and integration algorithms developed in Part I are used to analyse a number of practical problems involving unsaturated and saturated soils. The formulation and algorithms perform well for all the cases analysed, with the robustness of the latter being largely insensitive to user‐defined parameters such as the number of coarse time steps and error control tolerances. The efficiency of the algorithms, as measured by the CPU time consumed, does not depend on the number of coarse time steps, but may be influenced by the error control tolerances. Based on the analyses presented here, typical values for the error control tolerances are suggested. It is also shown that the constitutive modelling framework presented in Part I can, by adjusting one constitutive equation and one or two material parameters, be used to simulate soils that expand or collapse upon wetting. Treating the suction as a strain variable instead of a stress variable proves to be an efficient and robust way of solving suction‐dependent plastic yielding. Moreover, the concept of the constitutive stress is a particularly convenient way of handling the transition between saturation and unsaturation. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Bond rolling resistance and its effect on yielding of bonded granulates by DEM analyses     

M. J. Jiang  H. S. Yu  D. Harris 《国际地质力学数值与分析法杂志》2006,30(8):723-761

A discrete element modelling of bonded granulates and investigation on the bond effect on their behaviour are very important to geomechanics. This paper presents a two‐dimensional (2‐D) discrete element theory for bonded granulates with bond rolling resistance and provides a numerical investigation into the effect of bond rolling resistance on the yielding of bonded granulates. The model consists of mechanical contact models and equations governing the motion of bonded particles. The key point of the theory is that the assumption in the original bond contact model previously proposed by the authors (55th CSCE‐ASCE Conference, Hamilton, Ont., Canada, 2002; 313–320; J. Eng. Mech. (ASCE) 2005; 131 (11):1209–1213) that bonded particles are in contact at discrete points, is here replaced by a more reliable assumption that bonded particles are in contact over a width. By making the idealization that the bond contact width is continuously distributed with the normal/tangential basic elements (BE) (each BE is composed of spring, dashpot, bond, slider or divider), we establish a bond rolling contact model together with bond normal/tangential contact models, and also relate the governing equations to local equilibrium. Only one physical parameter β needs to be introduced in the theory in comparison to the original bond discrete element model. The model has been implemented into a 2‐D distinct element method code, NS2D. Using the NS2D, a total of 86 1‐D, constant stress ratio, and biaxial compressions tests have been carried out on the bonded granular samples of different densities, bonding strengths and rolling resistances. The numerical results show that: (i) the new theory predicts a larger internal friction angle, a larger yielding stress, more brittle behaviour and larger final broken contact ratio than the original bond model; (ii) the yielding stress increases nonlinearly with the increasing value of β, and (iii) the first‐yield curve (initiation of bond breakage), which define a zone of none bond breakage and which shape and size are affected by the material density, is amplified by the bond rolling resistance in analogous to that predicted by the original bond model. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Numerical manifold method for dynamic nonlinear analysis of saturated porous media     

H. W. Zhang  L. Zhou 《国际地质力学数值与分析法杂志》2006,30(9):927-951

It is well known that the Babuska–Brezzi stability criterion or the Zienkiewicz–Taylor patch test precludes the use of the finite elements with the same low order of interpolation for displacement and pore pressure in the nearly incompressible and undrained cases, unless some stabilization techniques are introduced for dynamic analysis of saturated porous medium where coupling occurs between the displacement of solid skeleton and pore pressure. The numerical manifold method (NMM), where the interpolation of displacement and pressure can be determined independently in an element for the solution of u–p formulation, is derived based on triangular mesh for the requirement of high accurate calculations from practical applications in the dynamic analysis of saturated porous materials. The matrices of equilibrium equations for the second‐order displacement and the first‐order pressure manifold method are given in detail for program coding. By close comparison with widely used finite element method, the NMM presents good stability for the coupling problems, particularly in the nearly incompressible and undrained cases. Numerical examples are given to illustrate the validity and stability of the manifold element developed. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

Chemical alteration of tephra in the depositional environment: theoretical stability modelling     

A. M. Pollard  S. P. E. Blockley  K. R. Ward 《第四纪科学杂志》2003,18(5):385-394

The study of the chemical stability of vitreous material in aqueous media is well‐established. There has to date been little consideration of the implications of variations in the chemical durability of tephra in Quaternary tephrochronology. Chemical alteration can take the form of cationic leaching from the matrix, or complete destruction of the silica network, either of which could constrain the ability to chemically identify distal tephra. Here we apply established models of vitreous durability to the published chemical analyses of a large number of Icelandic tephras in order to predict their relative durabilities under equivalent conditions. This suggests that some important tephras have relatively poor chemical stability, and that rhyolitic tephras are, in general, more stable than basaltic. We conclude that tephras should be expected to show predictable differential chemical stability in the post‐depositional environment. Copyright © 2003 John Wiley & Sons, Ltd.  相似文献   

Size and shape evolution of pores in a viscoplastic matrix under compression     

M. Berli  M. L. Accorsi  D. Or 《国际地质力学数值与分析法杂志》2006,30(12):1259-1281

The frequent use of soils and earth materials for hydraulic capping and for geo‐environmental waste containment motivated our interest in detailed modelling of changes in size and shape of macro‐pores to establish links between soil mechanical behaviour and concurrent changes in hydraulic and transport properties. The objective of this study was to use finite element analysis (FEA) to test and extend previous analytical solutions proposed by the authors describing deformation of a single macro‐pore embedded in linear viscoplastic soil material subjected to anisotropic remote stress. The FEA enables to consider more complex pore geometries and provides a detailed picture of matrix yield behaviour to explain shortcomings of approximate analytical solutions. Finite element and analytical calculations agreed very well for linear viscous as well as for viscoplastic materials, only limited for the case of isotropic remote stress due to the simplifications of the analytical model related to patterns and onset of matrix‐yielding behaviour. FEA calculations were compared with experimental data obtained from a compaction experiment in which pore deformation within a uniform modelling clay sample was monitored using CAT scanning. FEA predictions based on independently measured material properties and initial pore geometry provided an excellent match with experimentally determined evolution of pore size and shape hence lending credence to the potential use of FEA for more complex pore geometries and eventually connect macro‐pore deformation with hydraulic properties. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献   

BACKGROUND STUDY ON NON-RESIDUAL PHASE OF ELEMENTS IN CHANGJIANG AND HUANGHE ESTUARINE SEDIMENTS     

刘新威  吴景阳  蔡月琴  林荣根  韩桂荣 《中国海洋湖沼学报》1996,14(3):282-290

Analysis of Zn, Cu, Pb, Co, Cr, Li, Ni, K, Al, Fe extracted by 1 mol/L HCl or 0.5 mol/LHCl/H_2O_2, showed concentrations of Zn, Cu, Pb, Co, Cr, Fe, Ni were significantly correlated with Li, Al,K, and clay. Two methods are used to indicate the background value of the non-residual phase of elementsin sediments, and are the same as the methods used to indicate the background value of totalconcentrations in sediments. The first method uses correlograms and regression equations,the second usesthe mean element concentrations normalized with grain size. Li, Al, K can be used as reference elements to determine the background value of Zn, Cu, Pb, Co,Cr, Ni, Fe, while the clay concentration's correlation with some extractable concentrations can be used tocalculate the background value of the non-residual phase of elements as a percentage of clay concentrationin the sediments. Based on this study, the concept of using the background value of the non-residualphase of elements to compare the pollution level in differ  相似文献   

基于遥感技术对黄河口水色与岸线季相变化特征研究     

马安青  胡泓  袁道伟  胡婷 《中国海洋大学学报(自然科学版)》2008,38(1):151-156

使用Landsat-5 TM 2004年11月24日与2005年5月13日黄河口遥感影像,配合准同期外业实测资料,进行黄河口水体水色物质叶绿素a与悬浮泥沙的动态反演与河口岸线解译.研究表明由于秋末与春初黄河上游来水物质含量的差异,上述悬浮指标值存在显著的季相差异.根据样值与光谱特征建立的反演模型得出的反演值与实测值有平均在0.85以上的相关关系,具有很好的反演效果.岸线解译成果表明,黄河口岸线演变迅速,在河流平枯水量时期仍然具有较强的变化,岸线推进尤以新河口附近显著.这表明,使用遥感手段是进行河口生态环境质量监测的有效手段,是进行岸线动态变化研究的一种基本技术支撑手段.  相似文献   

地下洞库勘察中的深斜孔钻探和压水试验技术          下载免费PDF全文

吉孟瑞  孙桂明  吴昌庆  原华山 《山东国土资源》2001,17(2):56-60

青岛市黄岛区拟建设海底地下油气储藏库,前期地质勘察工作要求施工倾角45°、深220m的取心钻孔4个,并在孔内分段进行压水试验.本文介绍了如何利用XY-4型金刚石小口径钻机施工基岩深斜孔及压水试验技术.  相似文献